Keep up the great work Keith! Iv a 1992 SPI and have just removed everything (interior, engine, subframes etc) so starting to clean/replace everything now and really enjoying your videos! Thank you!
Great video again! I must admit I covered the whole floor in mine didn’t think of water getting underneath 😬 I can still hear the twin SU’s roaring away tho ! Hopefully all meet up sometime 👍
Great idea.every mini I have owned has leaked at some point so I think I will follow your lead and do this to Bernie the 1275GT when the time comes. Keep up the good work sir
I know this is an older video but I am still catching up and judging by the standard of your work and how much attention to detail you apply I am curious as to why the floor was left unpainted with top coat?
It didnt really think to much about it. The original floor is just epoxy primed, I didnt really think it would add any extra protection, and given the full 1 piece carpet in an MPI I'm never going to see it again anyway
I got a question I have 2 10s in my jeep renegade wheel area with bandpass box. I have added deadner to roof and under box trunk area . When I turn speakers up sounds like I'm under. Car wash vibrates and sounds like I'm in a barrel maybe flexing not sure please help. Can some give me steps to make the rear area sound clean and not move all the panels and no flex????
Really enjoying the channel. I’m on the hunt for another classic mini currently.. any tips on where best to find one, out of obvious fb marketplace and eBay etc. Thanks, Dean
Ps.... i have a brand new round nose mini under bonnet insulating kit (felt with black vinyl) i bought by mistake from mini sport, i'd like to donate it to the build if that's what you had in mind for Sprout? just need you're address somehow and it's yours!
Hi , I tried the links on your last video to try to buy a t-shirt and stickers , not sure what happened but I didn't get a reply . Probably my fault , not to great with Tec . Thanks
When you close the door 'sounds just like a golf!' :-)
:)
Thanks for the shout-out Keith! Great video as always!
No problem 👍
All coming together nicely Keith!
Your exactly right with the sound coat. Water will ALWAYS find the lowest point.
sounds fantastic.. I would believe that it's a MUST for all restorations...
Coming along nicely Keith she's a turning out to a great wee mini 👍👍
Through me for a minute at the beginning, everything was back to front lol 😂, another great video 👍
Keep up the great work Keith! Iv a 1992 SPI and have just removed everything (interior, engine, subframes etc) so starting to clean/replace everything now and really enjoying your videos!
Thank you!
Thank you.
Great idea, I will be copying it soon!
What a difference on those door bins! 😮
Hi Keith, should keep the mini that bit quieter hey and you've finally found the arches yay!!! Safe places are owner proof too lol 😊
Like the idea of not covering the little floor channels. I’ve just been using the same type of stuff in a van, makes a huge difference.
Hi Keith, i have'nt done the floor on Ozzy yet but i'll be doing it you're way, unless you have a patent pending😉 Funky new tunes!
Great video again! I must admit I covered the whole floor in mine didn’t think of water getting underneath 😬 I can still hear the twin SU’s roaring away tho ! Hopefully all meet up sometime 👍
Nice sound!
Great idea.every mini I have owned has leaked at some point so I think I will follow your lead and do this to Bernie the 1275GT when the time comes. Keep up the good work sir
I will need to do it too
Nice work as usual. 😎
Thank you! Cheers!
Hi , your so right , I filled the trofs and the car leaked . I had to pull it all up to dry the floor.
I just did silent coat in the centre of the panels.... did not want toadd much extra weight ☝️
That is what they are really for.
I know this is an older video but I am still catching up and judging by the standard of your work and how much attention to detail you apply I am curious as to why the floor was left unpainted with top coat?
It didnt really think to much about it. The original floor is just epoxy primed, I didnt really think it would add any extra protection, and given the full 1 piece carpet in an MPI I'm never going to see it again anyway
I got a question I have 2 10s in my jeep renegade wheel area with bandpass box. I have added deadner to roof and under box trunk area . When I turn speakers up sounds like I'm under. Car wash vibrates and sounds like I'm in a barrel maybe flexing not sure please help. Can some give me steps to make the rear area sound clean and not move all the panels and no flex????
Sorry, I've got to be honest, I don't know much about a Jeep Renegade but I'm assuming the larger panels i.e. the boot floor and roof are flexing.
I don’t want to be a weight weeny but how much do you recon those 20 sheets weigh?
6kg for 20 sheets, it's 3kg per Sq. M
Really enjoying the channel. I’m on the hunt for another classic mini currently.. any tips on where best to find one, out of obvious fb marketplace and eBay etc. Thanks, Dean
Sorry, not really. Good ones are hard to find, just do plenty of searching and walk away if it doesnt look right
Hi keith. Really neat job with the soundproofing. What are you doing with the rear wheel arches inside the car? Do they get trimmed?
I've got trim for them
How thick was the material you used?
2mm
@@classicminiworkshop Thank you
Ps.... i have a brand new round nose mini under bonnet insulating kit (felt with black vinyl) i bought by mistake from mini sport, i'd like to donate it to the build if that's what you had in mind for Sprout? just need you're address somehow and it's yours!
That would be very much appreciated. My e-mail is millermilla@sky.com Let me know your T shirt size and we can do a trade :)
Sounds like a bargain to me.....will e-mail you tomo with my size and address and if you reply with your postal details....its a done deal😉
What's sound deadening made out of?
Polymeric based damping material......... whatever that is LOL
How would there be any water on the inside though? I think I would do larger sheets and cover Every square inch. Project sprout is looking great.
Thanks. Unfortunately most minis leak a bit and even if they don't if you have any sort of spill in the car it's then a problem
This type of sound deadning is not intended to cover the whole surfaces, just 25% of each to kill the metal rattle sound.
Cool, that's what I thought too. I have a layer of sound deadening to go above which is closed cell foam
Hi , I tried the links on your last video to try to buy a t-shirt and stickers , not sure what happened but I didn't get a reply . Probably my fault , not to great with Tec . Thanks
Try now. The link was incorrect, apologies.
Did you move next door all of a sudden ......lol - or your camera is just mirror image! :)
LOL, I thought I would have a change around
Hi again keith, seems I should get with the kids on whatsapp group, how do I do that? No really I have'nt a clue.....just got.it
👍❤️🍻
It will make it easier if you ever need remove it in the future