The number of modules that can be connected depends on the total current of all modules in a potential group. This total current must not exceed the maximum current-carrying capacity of the power modules or COMPACT modules you are using. The total current is governed in large part by the digital output modules is 10A .
Et 200sp does not have its separate power module..it consists of one head module and rest of modules are remote i/o module.... Normally we can connect 4 input/output module with a single head module.... In et 200s there are total 4 racks or rail..each rack contain 11 modules. Including one interface module IM-151-1 series Followed by 1st PM module & 4 I/Os module then 2nd PM module followed by 4 I/Os module.
@@IndustrialAutomationDesignings this case comes when we externally connect separate power module of 24 volt. But their are some module with ENABLE NEW POTENTIAL GROUP (LIGHT BASE UNIT) ,with that module how many another modules can be connected?
Simatic manager S7 wale window ko open kare waha par ek plc ka icon bana hoga jiska naam hai "Simulation on/off" simulator icon ko click kar open kijiye fr is simulator mai plc ko Run-p ya Run Mode mai set kijiye.... Ab apne ladder program page ko open kijiye Program ko download kijiye aur fr yahi par ek icon monitor (chasma) ka hoga usko click kijiye Program monitor mode mai chala jayega ...ab aap input apply kar output check kar sakty hain...
The number of modules you can insert is dependent on the interface module you are using: ● Max. 12 modules with: - IM151-1 BASIC - IM151-1 COMPACT ● Max. 63 modules with: - IM151-1 STANDARD - IM151-1 FO STANDARD - IM151-1 HIGH FEATURE - IM151-3 PN - IM151-3 PN FO
Nice
Big fan sir 🖤😊✌
Thankyou sachin..
Weldone bro
Sir or video kb ayenge
Namskar sir nice concept
Nicely explain
Great job
In Et 200 sp there is power module is used .
How many modules are dependent on
One power module ?
The number of modules that can be connected depends on the total current of all modules in
a potential group. This total current must not exceed the maximum current-carrying capacity
of the power modules or COMPACT modules you are using.
The total current is governed in large part by the digital output modules is 10A .
Et 200sp does not have its separate power module..it consists of one head module and rest of modules are remote i/o module....
Normally we can connect 4 input/output module with a single head module....
In et 200s there are total 4 racks or rail..each rack contain 11 modules.
Including one interface module IM-151-1 series Followed by 1st PM module & 4 I/Os module then 2nd PM module followed by 4 I/Os module.
@@IndustrialAutomationDesignings this case comes when we externally connect separate power module of 24 volt.
But their are some module with ENABLE NEW POTENTIAL GROUP (LIGHT BASE UNIT) ,with that module how many another modules can be connected?
@@IK-qu9hw 4 I/Os can be connected.
@@IndustrialAutomationDesignings ok thank you so much for your time and help.
Mast 🙏🏻👍🏻
You are too good sir
Sir program kese online monitor krte h
Simatic manager S7 wale window ko open kare waha par ek plc ka icon bana hoga jiska naam hai "Simulation on/off" simulator icon ko click kar open kijiye fr is simulator mai plc ko Run-p ya Run Mode mai set kijiye....
Ab apne ladder program page ko open kijiye Program ko download kijiye aur fr yahi par ek icon monitor (chasma) ka hoga usko click kijiye Program monitor mode mai chala jayega ...ab aap input apply kar output check kar sakty hain...
Great sir 🙏
Sir kitne i/o module extend kar sakte hai
The number of modules you can insert is dependent on the interface module you are using:
● Max. 12 modules with:
- IM151-1 BASIC
- IM151-1 COMPACT
● Max. 63 modules with:
- IM151-1 STANDARD
- IM151-1 FO STANDARD
- IM151-1 HIGH FEATURE
- IM151-3 PN
- IM151-3 PN FO
Big fab
Great...
Ok
WELL EXPLAIN
Great
Good explained. But background me bahut aavaz Aata hai.
Thanks bro....i will try to remove this prob in upcomming videos..
Subtitule please
Great job
Great job