ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
TOP 10 RESIN MISTAKES (and how to fix them!) in 2022
ฝัง
- เผยแพร่เมื่อ 14 ส.ค. 2024
- If you want to learn more about resin art, I have launched a Complete Beginner's Guide to Resin Art.
Link: www.lambs-stud...
USE CODE 'lambsstudio' FOR A JUST RESIN DISCOUNT www.justresin....
Make sure to like and subscribe if you'd like to see more videos!
Instagram: / lambsstudio
Facebook: www.facebook.c...
Pinterest: / lambsstudio
Website: www.lambs-stud...
Hey guys! Thank you for watching my video! Please use my code 'lambsstudio' for a Just Resin DISCOUNT! justresin.store/
Great video! I tried resin the first time yesterday and I definitely made some rookie mistakes! I appreciate you giving straight info! 💕
youre so welcome! thanks for the kind comment.
I think You should make more videos!! Don’t give up. Less other things came up. Your videos are very clean and well done
Thank you for the kind message. I am surely working on it!
These are very good learning tips.Being a Newbie these tips are going to be very helpful. Resin can expensive if u don't know w hat ur doing.Thanks a Much.
totally welcome! thanks for the comment
nice video, thanks. suggestion: Lower your background music, it makes it hard to hear your words.
Thanks Ann!! I will keep that in mind for my next video - work in progress!
Thank you for the tips. You explained them really clearly and I hope more people watch the video to help with their art work. I have been doing resin now for about 4 months and I found this really helpful.
Thank you so much! This is incredible feedback ✨🥰
@@lambsstudio I know I'm late (1 year🙄) so I hope you get this. But my question is : I'm suddenly hearing about " measuring " your part's A and B so they're equal. I understood it to be only by volumn versus weighing. They're not the same consistency or weight so how would weighing ounce for ounce work?? I've always marked a cup and pour them both up to the line equally. It's worked for over 2 years that way for me. I don't understand how weighing would work...so confused.
Thank you for that excellent video.
@@sue4940 Hey Sue! It's always a great idea to measure by volume - it's recommended by most manufacturers. To measure by weight (on a scale), you can access the density of each part from the Safety Data Sheet that should be provided. That way you can calculate the correct weight, if you wish. Hope this helps!
@@lambsstudio I see. Thank you. I saw another artist measuring ounce for ounce and I still don't get how he managed to get it to cure . He was using artresin.
Thank you so much for responding. I truly appreciate it.💖
Just a tip: TH-cam is global, you may want to mention degrees in Fahrenheit for folks in US. I know they can do the conversion, and you may not think it’s a big deal, but your content will come across exclusive if you don’t. And I know you feel that your content is for everyone so just a little tip that’s all. 🙂 side note: you do great work 👍🏻😊
thanks so much sweetie pie!!
I hope you see this. I did my first resin pour. I had to tape the edges and pull tape after the resin set up a little so it wouldn’t run off. When I pulled the tape it took off the base coat of paint primer. Everything else is just about perfect except the spot where the wood is showing under the epoxy. It’s on the edge of a wood table top.
Sounds like the paint wasn't fully dry! Hopefully you can apply another layer?
I love # 9
This was so great! Thank you!
Thanks for the info, I use a mircowave cover to my work, so no bugs hair etc won't get into it.
Oh that’s clever! Do you put plastic down so you don’t get resin in your microwave?
@@lambsstudio no I leave it in the mold
@@lambsstudio a microwave cover is like a deep plate sized upside-down plastic bowl, used to either cover a dish of food while cooking it in the microwave, or to keep bugs/pets out of your food. It could be a literal cover for her microwave? I recall my grandmother having something like that.
I have a tray and it has a small indentation by the handle. After the first layer and it cured overnight I used UV resin to attach the handles. Can I use UV resin to fix this small spot or do I have to resin over the whole piece? If I have to resin it again, do I need to sand before doing another layer of resin?
This was really useful! Thank you!
You're so welcome! Feel free to reach out with any questions :)
Mistake #12: accidentally mixing hardener with hardener and forgetting to use resin at all. Then discovering 4 days later that your “resin” pour has no actual resin in it and that’s why it’s still completely wet on top of your canvas. How to fix? 💀🤦🏼♂️🤦🏼♂️
Oh no! You'll have to scrape it off completely, and follow the disposal instructions with your resin supplier.
What face mask protection do you use?
Thanks for this video! I needed it. I also need to know what's best to make sure your resin project does not stick to the mold. I used a mold (open hands mold) once. The next time resin suck to parts inside the mold. Any help with this is helpful. I looked up resin release sprays. To many to choose from and reviews were all over the place. Thanks again for this video which really helped me on time, inks, room temps! 👍
Hello! You can definitely use a mould-release to help - and try to purchase moulds that can take a lot of heat.
My resin is coming out bendy , what am I doing wrong.
Great video . Love with .
It sounds like you're not putting enough of PART B into your PART A. Try adding a touch extra next time!
I love this!!! Great explanation! If you make more I would love some insight into pouring nontinted resin. I was building a cute little “River table” and the resin went from clear to a milky white color. I wondered if it was the wrong temperature curing or what else would make it do that
what resin were you using? and did it cure hard?
Thank youu!!
Pleasure!
Hi iam new to resin is there a way to use resin after being mixed together if gets hard in the cup
Nope there's not as it has solidified into a plastic
Hi Real Quick Question: I really need your help! So I am making a resin bowl and it appears hard on one side and one side it still isn’t cured. Its been 48 hours now and I am worried if it’s going to cure before I remove from mold or not. Please provide some insight on how to fix this
Hey there - it sounds like the part A and B weren't mixed properly, or there was too much pigment added. I wouldn't rely on it curing at any point, so it's best to scoop it out and try again! Sorry that it didn't work out!
Hi i have got a little scratch on the middle of my coaster can you help me to fix it please
try a new layer of resin :)
How do I fix it , software and sticky. 5 minute epoxy
How to remove foggy layer on the top
New to your channel thanks for the help. Do you know how to remold your resin after it set.
i've never tried this! you can try using a heat gun however please be careful as the resin you are using might release fumes.
@@lambsstudio I asked mistakes all the time.
@@LoveandLiveShow only way to learn! :P
HELLO, I HAVE A QUESTION. MY COASTER HAVE A CRACK ON THE BACK SIDE. HOW CAN I FIX IT? WHY DID IT HAPPEN ? I MOVED MY COASTER WITH THE MOULD TO ANOTHER PLACE. THIS IS THE REASON?
PROBABLY!
Hi! I love this video, it’s a great help. I’ve done a layered letter, and my top coating isn’t setting hard, it’s quite rubbery. Would an additional layer on top solve this? Thanks
yes! I would definitely do an additional thick layer on top. Just make sure you had your part A and B measured correctly
Tq for the great info . I measured my resin but still having trouble in coating ..the resin move inside n the edges resin fades.. wat I can do? Covered edges using tape but worried if it's sticks together
I'd love to help out :) Shoot me an email with photos and I can assist: lambsstudio@outlook.com
Is there a way to fix resin art that’s already set but is still bendable, without throwing away the art?
You could go over it again so that it sets properly!
What to do if the resin won’t set..
mine isn’t setting from some parts.. I really want to fix it please tell me how to do it..
thsese flowers are precious to me🥺
It sounds like your ratios weren't right! Unfortunately, if it has been over 72 hours and it hasn't hardened, it will never harden.
So I've been using art resin as a thin clear coat for some props, and I've been brushing it on smooth, but it won't stay smooth. It keeps forming a squiggly ugly pattern regardless of how many times I try going back over it to smoothen it out. 😡 It's really frustrating and looks awful. How do I fix this and avoid it in the future?
hmm sounds like it could be a couple of things...when you say props do you mean 3D things?
Hi, thanks for the tips. I’ve started working with resin and I get beautiful results. But… for some reason it won’t stick to the edges of my board/canvas, it keeps dripping off and leaving a very thin (almost transparent) layer … I’m trying to reapply every 10 min but it’s really stubborn… any idea what am I doing wrong?
not doing anything wrong, it's the nature of resin, it'll drip off the sides. you could wait until the resin becomes really gluggy and then trial it that way!
Are you using coating resin. It's thicker
Do you use your waste resin at all?
yes! will be making some fun stuff with it soon! Stay tuned on my insta @lambsstudio
Hi, i made a flower bouquet in a square mold around 8’’x8’’x2.5’’, and its sides came out benty inwards, do you know why? Thanks!
Hey! Did you use a resin that is made for casting?
I have 2 different brands of resin. Both say to measure by volume. You said weight. ?
always use the manufacturers advice, but I need to update this video to always measure by ratio. thank you for the reminder!
I am having problems when doing resin serving boards. The boards are level, but the resin keeps pulling away from the edges of the board. How can I stop this? Thanks...
Hey! This sounds like there's a bit of oil/residue on the boards, which can cause the resin to "pull" back. Prior to use, make sure to wash and dry the boards. Alternatively, use a super thick resin formula like DiamondCote from Just Resin.
Use "lambsstudio" for a 10% off discount! :)
Hi!!!! If it was too cold for the first 48hrs of curing time- if I put it in a warmer spot should it eventually harden??
Your resin should harden within 24-48 hours.
Hi pls help me
The pigment paint I’m using sort of gets sticky and breaks up and scatters as I put it in the resin while mixing, I mix it slowly and for a long duration but it just keeps scattering….pls help me solve this pls 🙏🙏🙏🙏🙏🙏🙏🙏🙏.
sounds like you're not using the right pigments for your project - try Just Resin's pigment pastes and make sure to use my discount code 'lambsstudio' :)
My brother makes tables with resin and he is having this problem: little pits appear in all the surface and he doesn't know why. Sometimes it happens, sometimes not. Why do you think it is? And how could he fix it without having to do it all over again? Thank you!
Sounds like there's something else going on with the resin (maybe a reaction with a chemical in the wood?) I would contact the resin supplier and provide photos
Do you have a situation when you pouring a top coat the surface is not smooth? Irregular web or other defects are forming on my coasters. I do not know what to do. I use high quality resin. I have problem only with top coat layer. Please help me :)
What resin are you using?
A greasy oily layer is forming over my resume artwork while drying and stays even after that. Ruins the surface. What can be the reason? any solution??
sounds like amine blush - could be your humidity levels!!
My coffee cups sticks to my coaster. How do I address this. It cured for 3 weeks before I used it.
what resin did you use?
Hey!
My resin is a unleveled in some parts and has a few fingerprints so pouring a clear coat after 24 hours will fix it?
it should!
I got paper stuck to my resin keychain when drying. It looks like when you don’t fully open a package, that thin layer of paper. How can I fix it ?
you might have to sand it!
Hi! Does the mica pigment powder amount affect the resin outcome? I added a bit of mica too a small amount of resin (around 20ml) and it wouldn’t set. Xxx
Sounds like too small amount of resin - so the mica powder interacted with the ratios.
What can you use to fix pinholes ?
UV resin might be an option! Or top coat with DiamondCote from Just Resin - use my discount "LAMBSSTUDIO" for 10% off.
You didn't say how to correct mistake #8. Can it be corrected?
If the resin is not measured correctly, and does not set...unfortunately this cannot be rectified. Make sure you are using the correct ratios to avoid this!
My tape is stick to mdf clock board... any idea how to remove that
try an exacto knife!
Thanks for the video! I have a question 🙋♀️ my resin work is bendy and this is my third try with a scale and it’s 1:1 but still the same problem, don’t know what could be the reason 🤦♀️?
I know how it sounds, but trust me - try putting slightly less hardener in your mix!
@@lambsstudio gotta try this thank u for the advice ♥️♥️♥️♥️
Can you help out.? My project still bends what I’m I don’t wrong??
Hey! sounds like you have too much of part A or it's not in a stable temperature environment.
What do I do if the resin pulls away from the edges while curing?
try a high viscosity resin - like DiamondCote from Just Resin! Use 'lambsstudio' for a discount :)
Resin is soft
Hey I stared using resin on wood,but after 7 hours the edges of the painting is without resin.What should I do?
Try using a thicker resin! I would recommend Just Resin's DiamondCote. Make sure to use my discount at the checkout - lambsstudio :)
Thank you for the tips. When two colors are used they just fuse and dont look distinct. Why is that? Also, can fabric paint be used to color resin? Thanks🙏
It depends how you're using your colours (colour density) and how you're pouring the resin. I don't think fabric paint can be used, I've never used it!
@@lambsstudio Thank you 🙏
Why do u get a gas look in the middle of coaster, is it the resin?
You gotta show me photos of what you mean! Email me at lambsstudio@outlook.com
So, I have only just become aware that epoxy resin, of any sort, is a highly toxic material to work with.
You have to glove up (which I see you doing here, but your arms are exposed) be in a very well ventilated area, and most importantly you Need to wear a high quality respirator. Not just a dust mask, but a respirator that will filter the gasses of the curing epoxy from your breathing it in.
Hardly anyone shows themselves doing this, but we have been risking our lives making crafts without knowing it. Please look up the MSDS of your resin. They have to have one. Please protect yourself, and promote the serious need for safety.
it really is! it’s so important to be safe around resin. This video is only a snippet taken out of my Complete Beginners Guide to Resin Art Course which has its own section dedicated to safety around resin. Thank you for spreading the word!
the music was a great distraction to the audio!!
Thank you for the feedback!
I just did my first coaster set and there’s micro bubbles all throughout my coaster ?! What about micro bubbles
you'll need to blast those out with a heat gun or flame torch before it sets!
I'm using protite resin and having a hell of a time with it, i blow the air bubbles out with a blow torch and the bastard catches fire , if i use a heat gun it leaves dimples in the whole piece😡 so, my question is, am I using the wrong type of resin or should I just go back to mowing the lawn😞
sounds like you're using the wrong type of resin! Try JustResin, whose resin is made for artists and most importantly is not flammable (no resins should be able to catch fire!). I have a discount code on their website, 'lambsstudio'
Let me know how you go!
@@lambsstudio Thanks heaps very much appreciated:)
Heyy i have a doubt. I am a beginner and i am doing on canvas so when i pour resin, the colours are mixing each other i am not getting correct shape. All colours are moving and making some other shapes . I don't want that i want fix this problem but i couldn't do. I tried many ways nothing is working please help me . Its just moving and all shapes will go and it will look like something else i want to get a shape what i want. Please reply and help me.
Use wood instead of canvas - resin is thick and heavy and can warp your canvas meaning it can warp the colours too!
@@lambsstudio thanks❤❤
I have got resin that won't set. The hardner was as thin as water. And I had weighed them in equal parts. But even after 2 days it won't set!
Edit: It's been weeks but it won't set.
Sounds like the weighing is the problem! Part A and B will weigh differently, so they wouldn't be equal parts and the ratio would be off. For 1:1 resin products, it's best to measure using mls.
@lambsstudio yeah but the seller told me to weigh in equal parts.
@@shovanabajracharya Try measuring in mls and see if it makes a difference!
@@lambsstudio I had to throw away the one which didn't set.
Helpful but very difficult to concentrate on what you are saying with background music. Would suggest you don't use any music at all.
totally understand! thanks so much for the feedback
How do you remove spoilt resin off of a canvas board
sand it back!
I NEED SOLUTIONS HELP ME HOW DO I FIX ITTT ITS A SCHOOL PROJECT FOR TMRWW WE’RE SELLING THIS CRAP
sounds urgent! feel free to email me with any questions.
let's say you have measured your resin currently, but your environment is too cold whilst you leave it to set, would it not set at all or would it just take longer to set then usual- what has been your experience with this? (dam Melbourne climate ).
Thank you so much for the tips btw, very helpful.
it would take longer to set! it could also disrupt the properties of the resin.
thanks a mill. I still have a problem that when im mx two colours they will blend within a few minutes. it all looks good at the start and then after 20 minutes its just one big coloured project.
Hey! Are you casting by chance? Send me an email lambrini.niaros8@gmail.com with photos so I can help!
Please could you help
After 10- 12 minutes I pour my resin it gets this cloudy layer on top.
Where am i going wrong???😪
Sometimes resin becomes cloudy in cooler weather. Try placing your resin container in a bath of warm water before you start!
@@lambsstudio Thank you.
I just tried my first resin art it was a fail. Don’t look as easy as shown on TH-cam videos
Email me if you have any questions! Happy to help. lambsstudio@outlook.com
Don't you wear protective mask? Epoxy is very toxic.
Yes I do! For the purpose of this online course, I didn't wear it. The course has its own, separate section for safety (including wearing a mask).
@@lambsstudio ok👍
#12: working without a respirator.
PPE is absolutely important! Everyone should read the SDS before assessing personal PPE prior to using any chemical.