After seeing that Stinger from day one, I can guarantee UT is the only company that can do the 77 Camaro from movie 1 justice due to the complexity in design.
It’s crazy that we have not seen any new MPM-graded mold for TF1/2/3/4/5 for Bumblebee since the MPM-03. UT or any company can just jump in, make one figure like the TF1 77 Camaro, and we would go crazy for it
@@TranKollector To be honest, the MPM 3 mold, even for it's day wasn't the greatest(aside from looking better porportionately and having a neat backpack), the legs of bee still look off to this day, with the back headlights creating his calves as opposed to being his butt cheeks like the movies, lol. Age of Extinction has the most complex bee design in the Bayverse, and the fact the UT executed it so flawlessly, means they can easily create highly accurate figures of rest of the Bayverse Bee looks.
@@rishav-2749For real, with this clean-looking Stinger with movie-accurate legs and feet/heels, UT can definitely pull off amazing-looking Bumblebee figures considering that there are tons of Bumblebee designs out there to take references from and improve upon
@@boyiwei0723 Whattt!? I didn’t know that Metagate was a studio of UniqueToys at all. I mean that makes sense since all of their designs has been amazing
Yes, UT will also make other versions of Bumblebee Transformers based on the original Stinger design, and they chose a very high level of difficulty from the beginning and successfully challenged it. This is called technical accumulation. We are ushering in a new round of mechanical revolution!
For real, all of their figures have been amazing so far! They really know how to approach complicated designs for sure. They set up hard challenges and successfully conquered them
@@EGamer05 They said that if the Stinger sold well, then after Optimus Prime it would be Bumblebee, since there was already Megatron and there were enough options on the market.
Stinger and BTT Bumblebee are the best of all those. For TLK Bumblebee, I see that Bumblebee is using the same transformation from MPM, the same transformation for first Bay's Transformers and ROTF that changes only Camaro because its already facelift model while TLK Bumblebee should resembles more from DOTM with the things those are attached with the doors should be some kind of spoiler/wing instead of camaro's c pillar. And I know its been very long, but I just noticed they still used the same original rear fender from previous gen camaro for his thigh in DOTM and TLK when DOTM already have the right generation camaro unless it's been customized by new body kits and TLK with new generation camaro which doesn't have that rear fenders
This TLK Bee is definitely not screen-accurate! They just tried to tweak the MPM-03 mold a bit to sell more figures. At least, it’s better than those merely repainted figures of the MPM-03. Hopefully UniqueToys or another 3rd-party company will work on a Bumblebee figure next, for any of the first 5 movies
Link for MD-003 Bee: s.click.aliexpress.com/e/_mtMPYOB
After seeing that Stinger from day one, I can guarantee UT is the only company that can do the 77 Camaro from movie 1 justice due to the complexity in design.
It’s crazy that we have not seen any new MPM-graded mold for TF1/2/3/4/5 for Bumblebee since the MPM-03. UT or any company can just jump in, make one figure like the TF1 77 Camaro, and we would go crazy for it
@@TranKollector To be honest, the MPM 3 mold, even for it's day wasn't the greatest(aside from looking better porportionately and having a neat backpack), the legs of bee still look off to this day, with the back headlights creating his calves as opposed to being his butt cheeks like the movies, lol. Age of Extinction has the most complex bee design in the Bayverse, and the fact the UT executed it so flawlessly, means they can easily create highly accurate figures of rest of the Bayverse Bee looks.
@@rishav-2749 MG Drift has done it, so nothing is impossible for Bumblebee. I heard that MG is a sub-studio of UT
@@rishav-2749For real, with this clean-looking Stinger with movie-accurate legs and feet/heels, UT can definitely pull off amazing-looking Bumblebee figures considering that there are tons of Bumblebee designs out there to take references from and improve upon
@@boyiwei0723 Whattt!? I didn’t know that Metagate was a studio of UniqueToys at all. I mean that makes sense since all of their designs has been amazing
Yes, UT will also make other versions of Bumblebee Transformers based on the original Stinger design, and they chose a very high level of difficulty from the beginning and successfully challenged it. This is called technical accumulation. We are ushering in a new round of mechanical revolution!
For real, all of their figures have been amazing so far! They really know how to approach complicated designs for sure. They set up hard challenges and successfully conquered them
They should make it
@@EGamer05 They’d better make it soon!
@@EGamer05 They said that if the Stinger sold well, then after Optimus Prime it would be Bumblebee, since there was already Megatron and there were enough options on the market.
@@boyiwei0723Yesssss, that has to be the case! A new TF1/2/3 Bee to go with the UTR10 Optimus or a TF4 Bee to go with Stinger will be awesomeee
Cant wait for the TLK remake of Bee as well as the rotb one and Stinger is a nobrainer to
Ikrrr, the TLK Bee and AOE Stinger are awesome! And yess, the ROTB Bee will go so well with their ROTF Optimus Prime too
md 003 is chefs kiss
Added finger articulations are always nice!
Ahhh yea. FINALLY! I've been wanting someone to make a cgi accurate talk bumblebee.
We have so many awesome Bees on the market!
Link for BTT-01 ROTB Bee: s.click.aliexpress.com/e/_mOzijib
Stinger and BTT Bumblebee are the best of all those. For TLK Bumblebee, I see that Bumblebee is using the same transformation from MPM, the same transformation for first Bay's Transformers and ROTF that changes only Camaro because its already facelift model while TLK Bumblebee should resembles more from DOTM with the things those are attached with the doors should be some kind of spoiler/wing instead of camaro's c pillar. And I know its been very long, but I just noticed they still used the same original rear fender from previous gen camaro for his thigh in DOTM and TLK when DOTM already have the right generation camaro unless it's been customized by new body kits and TLK with new generation camaro which doesn't have that rear fenders
This TLK Bee is definitely not screen-accurate! They just tried to tweak the MPM-03 mold a bit to sell more figures. At least, it’s better than those merely repainted figures of the MPM-03. Hopefully UniqueToys or another 3rd-party company will work on a Bumblebee figure next, for any of the first 5 movies
Are they doing another other Bumblebee figures? What companies are doing them and what movies are those Bumblebee figures from?
For now these are the only Bumblebee figures that are coming, along with the new Studio Series Beetle Bumblebee!
Damn i thought that ROTB bee was a Non transforming figure
The second ROTB Bee is a transformable figure. It looks incredible!
Lastknight bumblebee
I’m waiting for that one to come out for suree
Hmn? Hmn? HMN?
hmmmmm? hmmm?
@@TranKollector Hmn?
@@stephensharma5275 hmmmmm?
@ hmn?
@ hmmmm?
Do you like ksi new song
I have not heard of that song yet!
They better make bee after stinger
They mustttt make a Bee, either a AOE Bee to go with UTR9 Stinger, or a TF1/2/3 Bee to go with UTR10 Optimus Prime
whats its called the tlk bb
The TLK BB’s name code has not been revealed yet