Fascinating, (especially to the boy in blue, at 0:49 (if it's his son, well then we understand- "Dad is SO boring." LOL. But really this is a well narrated and informative video. Thank you, a lot!
Great video! I would humbly suggest that the words on the machine would say "16 gauge or THINNER" instead of "less". Some may misunderstand that as a "less" gauge; as in 10 gauge is a "lesser gauge" than 16. Which is obviously not what you meant nor is it common sense. But I've seen many people with less common sense. "16 gauge MAXIMUM" would work too! I had to do a double take when I ready that lol. But then again, I'm also just a slow learner :) Just my 2 cents. In any case, thank you for sharing!
I work at a sheet metal place and I was roll forming some 2*4 and I cut my thumb to the bone completely cut the tendon and cut a nerve pretty bad wear gloves
Ukazovat učňům jak ustříhnout několik kusů tenkého plechu , hrůza . To spouštění stroje by mělo jít do muzea a celý stroj s ním.Vůbec tam není zadní doraz,zbytky plechu nosí učitel přes celou dílnu!Chtěl bych ho vidět jak stříhá 1000 kusů rozměru 1x100x1000 z formátu 1x1000x2000. Vzadu za strojem se musí nastříhané kusy samy rovnat a vůbec nepřipadá v úvahu aby tam někdo stál.
Such a teacher sense of humour.
Fascinating, (especially to the boy in blue, at 0:49 (if it's his son, well then we understand- "Dad is SO boring." LOL.
But really this is a well narrated and informative video. Thank you, a lot!
Great video! I would humbly suggest that the words on the machine would say "16 gauge or THINNER" instead of "less". Some may misunderstand that as a "less" gauge; as in 10 gauge is a "lesser gauge" than 16. Which is obviously not what you meant nor is it common sense. But I've seen many people with less common sense. "16 gauge MAXIMUM" would work too!
I had to do a double take when I ready that lol. But then again, I'm also just a slow learner :) Just my 2 cents.
In any case, thank you for sharing!
Get those kids safety glasses!
lmao
it class is great ! Great teacher, great classmater !
boy in blue shirt:..."whateveeeeeeer"....lol
I work at a sheet metal place and I was roll forming some 2*4 and I cut my thumb to the bone completely cut the tendon and cut a nerve pretty bad wear gloves
Nice video
How much force does that plate hit the floor with? Can the shear be set up so the plate doesn't hit at all? Kinda worried about toes! Thanks
When your marking always make a crows foot….
the kid in blue is so bored..😴😴😴
Hahahhahaa, are you referring to Adidas? lol
The” straight edge” thing is called the fence
Dear I need width 90cm thicknes about 1.5mm for Cutting Aluminum, Could you give me the FOB Price Regards
dear we just have the machine
How or from where I can get Gauge indicator?
Thank you,
Miller Electric 229895 Gage, Wire Metal Sizes about $8
Ukazovat učňům jak ustříhnout několik kusů tenkého plechu , hrůza . To spouštění stroje by mělo jít do muzea a celý stroj s ním.Vůbec tam není zadní doraz,zbytky plechu nosí učitel přes celou dílnu!Chtěl bych ho vidět jak stříhá 1000 kusů rozměru 1x100x1000 z formátu 1x1000x2000. Vzadu za strojem se musí nastříhané kusy samy rovnat a vůbec nepřipadá v úvahu aby tam někdo stál.
1:22 what is this tools name? Where can I get this?
That’s a sheet metal thickness gauge. Should be able to get one on Amazon
no safety ppe for kids
Dude you’re supposed to mark the ends of the sheet never in the middle of the panel.
3 sixteenths is 7 ga.
Wow, talk enough,!
Jadul
3/16 is more like 7 gauge
You stole my comment 😆
:D
Where is the minority? Just only German people here lol
Ohh what a hard job, im sure you need an engineering degree for this.
That's a baby shear try using an auto shear