Aprilia Caponord Rear wheel bearing replacement

After hearing a strange noise at low speed in Italy I've decided to replace the rear bearings in my wheel.
oh and don't forget to lubricate those ends seals with waterproof grease .
Also like I use it's always a good idea just to make sure to run a Lazer on the chain to check for perfect alignment.

[@pardonwhat]

Great job thanks, if it’s not the bearing check the spokes (watch out for the small grub screws), the only other I can think of is it a new tyre tread pattern singing at a particular speed!!?

[@captbarb6642]

I could only hear the noise at 2.6 k revs fully loaded .
The only thing I can think of is the chain tension when I set mine up I set the 15 mm on the centre stand so wheel not loaded so going to do that again .
Just checked tiny bit tight so spot on now 👍

[@pardonwhat]

Just about to put Bridgestone Battlax AX41 on,, have you thoughts on tyres?

[@captbarb6642]

I'm on my second set of Michelin anekee3 tyres after getting 12k miles .
So very hard wearing great grip just keep of wet grass stones are ok .