Guide to changing a Kitchen Sink Waste Drain (Singapore DIY)
ฝัง
- เผยแพร่เมื่อ 4 ก.ค. 2023
- DO IT YOURSELF to save some money. It seems difficult at the start but you will feel accomplished once you completed it. 😊
Local Hardware Store Cost:
Kitchen Sink Waste Drain: $7.90
UPVC Bottle Trap (For Sink): $2.50
Monkey Pliers: Below $10
Phillips Screwdriver: Below $3
Affiliate Links
UPVC Bottle Trap(For Sink): $3.50 [c.lazada.sg/t/c.YlkC6a]
Ingco Monkey Pliers: $12 [c.lazada.sg/t/c.YlkC62]
Took me about estimated 20 mins in total to do the whole replacement and recording
Disclaimer: I am not a trained in any handyman work, please do it at your own risk.
If my video help you in any way, please subscribe to my channel and give me some love and support
If there is any experience handyman or repairman watching my video,
Do comment on the things where I can improve on to help me hone up my skills
Hope my sharing save you some money💰💰💰 and provide you with some free knowledge.
Like & subscribe my channel to support my small TH-cam channel. 💕
This is inarguably the best guide to changing a kitchen sink waste drain I have ever seen in my life
I changed my mums kitchen waste drain by following your instructions….very detailed and good. Thank you!
Nice job👍 Thank you for the kind words. Happy to be able to help and share❤️
Great job with easy-to-follow instructions. Thank you so much! 👍👍👍
You are too nice! Always like your food video more
Thank you!
Congrats on 1k bro 🎉
Such a great number!
Thank you bro🙏😊. It is indeed a great number to reach!!
hey bro, I just changed mine but my question is how do I know if the bottle trap, the part that merges with the main pipe is fully inserted properly? my pipe has the leftover mark from the old one but I've tried forcing it as much as possible but it won't go in anymore.
I tested everything already though and there's no leakage
Hello bro, as long as your rubber is on the pipe and you screw the cap for the pipe tight. I think the distance inside does not matter. The rubber prevent the leakage when the cap is screwed tight(hand tight is sufficient)
bro, so I had to reinstall because the top part was leaking, after reinstalling now the part I mentioned in my previous comment has some wetness when I rub with my finger but no dripping. really hesitant to redo again😢. is it normal or will it be alright??@@diyyangSG
hey bro, I had a leak coming from the part that connects to the strainer and to my surprise the rubber seal was missing... that part is now settled but upon reinstalling, now the part that connects to the main pipe gets wet around the bottom lip. I haven't notice it leak but it does get slightly wet when I touch it.
when I remove the bottle the rubber ring for that part was already inside the main pipe with one part bent. I took it out and reinstalled it into the bottle catch but now as I said, it gets wet but haven't notice any leaks from it just wet.
I tried tightening it as hard as possible already but still the same. I'm scared that removing the entire thing again will cause another leak
Hihi, if you are scared and it is abit wet actually can leave it there. After awhile dirt will clogged it up. That's what I will do. But this is not a professional solution just my own personal DIY solution 😅 If it is very serious, replacing the whole thing is better. 🙏
@@diyyangSG hi bro, the whole bottle trap is brand new but I think the rubber ring got moved out of position while I was installing it into the main pipe.
I tested it by turning the water on max for 1 min and had like 1 drop of water only.
not sure if I should fix it or if it's ok🤣
I think is ok to leave it. If it is just one drop of water
bro why you dont wear glove ? or are you legit use to it already
i always want to do things fast but always regret it later when i have to do the washing of my hands🤣. I really have to listen to you and start wearing gloves.👍