That alligator clip and red handled scissors are both used in the telecommunications industry. The small "bed of nails" (on the clip) is used to pierce the insulation of the thin cross connect wire and the large spike was used for the old style single pair drop wires. The old drop wires had a thick rubber sheath and we used the spike to test drops without taking anything apart. The scissors (shears we call them) we use for fiber optic ribbons. They make really clean cuts which is necessary for the optics to work right. Just thought you might find that a bit interesting. Always like your videos, keep them coming.
One of my favorite mods is to take the Protk radio case foam and cut out a slot that will fit the iCharger too. A guy I know fits his radio, the bigger iCharger and some other small items all in the padded protek case.
Wow! I've always wondered what semi-pro/avid RC hobby folks have & bring to the track. Very impressive. I bring very bare minimum; couple spare parts & common tools. I love the levels of this hobby 😀
If you take a large zip tie and put it around your ride height gauge you can use it for a handle. Makes it easier to use when working on the low riders.
I find the best ride height gauge is the mugen aluminium one, you drop the car, hold the measuring arm down then it rises up and hits the chassis and you can check the ride height instead of setting it before sliding under the car
Jason, I see you use liquid wrench for tire sauce. Is that for a high bite clay surface? Im using a tire sauce purpose made for rc on a high bite clay track. With liquid wrench, do you allow it to dry before heading out on the track or run em wet? I see theres quite a few tire sauce brands out there but not sure which one to stay with. Would be great to hear your thought on sauce!
How do you like the makita electric driver? I'm looking to get one for my Tekno vehicles and I couldn't find any good reviews out there on TH-cam. Could you elaborate more on it?
Hey Jason. What was the black handled tool in your Plano tool box that you said you used when you ran a B5M, T5M platform, as I just purchased a used B5M and I'm just getting into racing - can't let my grandson have all the fun!
Speed outfit here I come, never had any issues with screws until the last month or so, then had about 3 in 3 weeks on 3 different vehicles! I've quality drivers etc, just bad luck. Had to Dremel and pliers etc. drill through another, and Dremel the top to a groove to use with a flat head. I need a screw untapper set. My hobby shop looked at me queer when asked if they had one. The hardware shops only do big stuff😩.
hi im looking to buy a 1/10th scale for carpet racing. i see almost 3 different versions of the b6 on amain. can you tell me which b6 to buy specifically for carpet ?
Jason Snyder drinking game. Take a drink every time he says "stuff like that" or "actually". Guaranteed you're not walking away from the video. You're crawling or passing out. LOL. Love 'em Jason. Keep 'em coming!
Soo awesome. Just been getting into SC racing and been loving all your videos. Super informative and interesting. Thanks for helping us out with your content.
Great video bro👍🏼👍🏼!!! I love tools and have many so I'm into this kinda stuff! Great set up when you go club racing and nice tools!!! Would you happen to have a part # for your Meckita driver?
Thanks for the video, could you please do a video on the future of the sport, keeping in mind the economy - is it growing or fading? Why aren't there more spectators at these races? They seem very exciting, it's a shame this isn't more popular and/or televised (on cable at least).
+Rafi Medina I don't have one myself but a lot of my friends have them. They look pretty trick, you don't need to recharge them too often, and they have an adjustable torque setting.
when you realise you've gone MASSIVELY ott with tools, original build kit box full of spares, soldering iron, leads, charger, box full of tyres, spare electrics, muc-off, oils, magnetic tray etc etc ... and I garentee your faster on track 😂
As an old school indoor now over 40 soon to be SC truck racer this was great to see as I now can use this to outfit my travel bag lol many thank
That alligator clip and red handled scissors are both used in the telecommunications industry. The small "bed of nails" (on the clip) is used to pierce the insulation of the thin cross connect wire and the large spike was used for the old style single pair drop wires. The old drop wires had a thick rubber sheath and we used the spike to test drops without taking anything apart. The scissors (shears we call them) we use for fiber optic ribbons. They make really clean cuts which is necessary for the optics to work right. Just thought you might find that a bit interesting. Always like your videos, keep them coming.
I took your old oil tub idea and use it for my shocks spring. I keep all my AE/Losi and Schumacher spring, One for the front and one for the rear.
One of my favorite mods is to take the Protk radio case foam and cut out a slot that will fit the iCharger too. A guy I know fits his radio, the bigger iCharger and some other small items all in the padded protek case.
Wow! I've always wondered what semi-pro/avid RC hobby folks have & bring to the track. Very impressive. I bring very bare minimum; couple spare parts & common tools. I love the levels of this hobby 😀
If you take a large zip tie and put it around your ride height gauge you can use it for a handle. Makes it easier to use when working on the low riders.
I find the best ride height gauge is the mugen aluminium one, you drop the car, hold the measuring arm down then it rises up and hits the chassis and you can check the ride height instead of setting it before sliding under the car
Great vid varry helpful.where can I get one of those r.c bags I really could use one of that size thanks again and stay safe
Do you have a link for that pit board?
This week in the news, an unusual spike in the number of jewellers loupes sold across the globe! 😂😂😂
Great video dude.
do you have a link or contact for the PITBOARD?
Thanks for sharing your setup gave me some good ideas as I'm looking to step up my game in the pits to and from.
Could you make an update video of this and "how and what to pack on travels"?
ever thought doing a video on the pros and cons of bypassing the on/off switch on electric vehicles
Hi Jason ,
Where did you get your plain white plastic set up board you use. Can you tell what material it’s made of?
where or how do you carry your car on a plane so that it doesn't get damaged?
Jason, I see you use liquid wrench for tire sauce. Is that for a high bite clay surface? Im using a tire sauce purpose made for rc on a high bite clay track. With liquid wrench, do you allow it to dry before heading out on the track or run em wet? I see theres quite a few tire sauce brands out there but not sure which one to stay with. Would be great to hear your thought on sauce!
How do you like the makita electric driver? I'm looking to get one for my Tekno vehicles and I couldn't find any good reviews out there on TH-cam. Could you elaborate more on it?
What is the best dual charger under $100 for my dynamite reaction 2s lipos?
Can you please tell me what Pelican case that you have your charger in please. I need to order one for my 4010.
Hey Jason. What was the black handled tool in your Plano tool box that you said you used when you ran a B5M, T5M platform, as I just purchased a used B5M and I'm just getting into racing - can't let my grandson have all the fun!
It's called a "boto sizer." It reams the ballcup if it binds on the ballstud.
Speed outfit here I come, never had any issues with screws until the last month or so, then had about 3 in 3 weeks on 3 different vehicles! I've quality drivers etc, just bad luck. Had to Dremel and pliers etc. drill through another, and Dremel the top to a groove to use with a flat head.
I need a screw untapper set. My hobby shop looked at me queer when asked if they had one. The hardware shops only do big stuff😩.
how do you remove a ball cup with a set of shock shaft pliers?
Are stage 2 tires going to be released as premounts? Love the tires
hi im looking to buy a 1/10th scale for carpet racing. i see almost 3 different versions of the b6 on amain. can you tell me which b6 to buy specifically for carpet ?
Jason Snyder drinking game. Take a drink every time he says "stuff like that" or "actually". Guaranteed you're not walking away from the video. You're crawling or passing out. LOL. Love 'em Jason. Keep 'em coming!
Where do you put your car? Do you use the Makita driver with hex drives to actually wrench on the car? Where do you get the bits?
He uses MiP hexes for his drills and hand tools, so do alot of the rc world, damn near un breakable
Also, what do you use a pit board for? I have a pit mat, but have never seen a pit board.
Ryan LeMasters level surface for ride height adjustment? an unnecessary object in my eyes.
What do and how do you pack you rc vehicles in
What size are your Knipex cobras? 5 or 6 or 7 1/4 or bigger?
I have the same brand backpack... Good stuff..
Soo awesome. Just been getting into SC racing and been loving all your videos. Super informative and interesting. Thanks for helping us out with your content.
Love the Plano cases... They are like 12USD end 45€ here in Europe... :( Anyone other suggestions?
And... How you transport you modes???
Great video bro👍🏼👍🏼!!! I love tools and have many so I'm into this kinda stuff! Great set up when you go club racing and nice tools!!! Would you happen to have a part # for your Meckita driver?
DF010DSE
+Nate Burns thanks bro, I got it!!!!
+BOTAJELL no problem.
What is your go to racing car
hey I uave a question . I just bought a used losi 22t stadium truck are there any tips on what motor and esc I should use
SPKILLER 310
www.google.com/search?rlz=1CDGOYI_enUS752US752&hl=en-US&ei=Cla1WY2lFeO4jwSymZvYAQ&q=mamba+monster+x&oq=mamba&gs_l=mobile-gws-serp.1.0.0i20k1l2j0i131k1j0i67k1j0.30262.37029.0.38176.14.13.1.2.2.0.311.1850.1j8j2j1.12.0....0...1.1.64.mobile-gws-serp..1.13.1378.3..35i39k1.K8kmkDd18fM
Thanks for the video, could you please do a video on the future of the sport, keeping in mind the economy - is it growing or fading? Why aren't there more spectators at these races? They seem very exciting, it's a shame this isn't more popular and/or televised (on cable at least).
whens the shop tour!
Where can you find the box that u put in the shock springs?
Walmart in the fishing section
Thanks for making the video
Jason whats the name of the kit for stripped screws ?
amzn.to/2aT7jJi
and were u keep ur cars?
No links for social media?
Thanks for sharing. Great information
Can you make a video of your current cars
what have you changed in 2018?
Why do you take a power supply?
where is the car? in another bag?
whats the link on that ogio bag? I cant find it on amazon? let me know I want to buy one
Niko&JoshBobic It's the ogio rig 9800. Many different color options on Amazon
@Shortcourseworld how loud is the Schuur Speed power supply?
It's not very loud
It's the same one I have
Thanks for the reply, they look like a quality product
Yea they are really good
If you have a meijer store near you, then you can pick up the Plano tool boxes he has for 9.99 each vs the 12.50 on Amazon.
How do you carry the kits you are running to the track?
just throw em on top of my bag
Love the shirt. How funny is that, I watch Barnacules channel and yours. I'm into technology & Windows just as much as this stuff.
What makita drivera are those? What you think about them
Makita DF010DSE 7.2v driver
+Nate Burns do you have one yourself? What you think about them?
+Rafi Medina I don't have one myself but a lot of my friends have them. They look pretty trick, you don't need to recharge them too often, and they have an adjustable torque setting.
Nice vid bro really helped me out alot i hope to run in to u in the racing secne one day lol
yeah barnacules shirt
How much did this cost
It's funny that power supply is a reworked rack server computer power supply. Makes sense I suppose..
Thanks Nate.
No prob!
Great vid man !
Lol I have a tackle box for tools and parts, and my trucks bed for everything else😂😂
Pls make more vids, it have been a long time ago
when you realise you've gone MASSIVELY ott with tools, original build kit box full of spares, soldering iron, leads, charger, box full of tyres, spare electrics, muc-off, oils, magnetic tray etc etc ...
and I garentee your faster on track 😂
Love your vids
I'm amazed that this guy doesn't answer or interact with people in the comments section.
Nerdgasm shirt!
This video is SUPER....:)
"Really Really, Super Super :)
please do a 2024 update
Tips for a beginner
What the hell is tire sauce😂
Do even race, bro?
Jeez why you watching this if you don't even Kno what tire sauce is?