Hey Matt, I know it’s a pain to travel in this case freeze but the videos are worth it. The banter between you and Mike it’s as good as seeing the project come together have a good one…
Looks great! I hope that no one accidentally puts the diverted valve in the wrong orientation or you are going to have the reel or boom end flailing around with HP water since you only have one gun. I would label the heck out of that to valve!!!
Matt it always cracks me up when you say don't be a sissy about tightening those hose ends the first Cobra jet hose I purchased from you a 25-footer cuz I needed something in a pinch leaked like a sieve from you guys. I had to pull it all apart and tighten it not like a sissy. 😁👍
This would have been helpful about 2 weeks ago when I spliced my power cord in the middle. I ended up with a “wonk” too. Luckily I can hide it behind the washer. Initially I was going to solder in the actual plug but opted against it.
Amazing job! It's great to see this whole setup evolve over time. Also, great that the vented cap fixes the pressure issues on the 1322. That issue seemed to be a really tricky one to pinpoint. 🙌🏼🙏🏼
Matt I fully understand the sticker comment I absolutely hate that from manufacturers a little trick for you guys use a lighter fluid to remove the sticker it will take the adhesive off perfect it does not affect any plastics it works awesome. If lighter fluid is not available you can use Naphtha
I had a quick question that I saw you answered a few years back, but now there are other options available. What pressure washer would you suggest to purchase excluding Kranzle? I don't know if I want to drop that much on a pressure washer yet and my Ryobi is dying/dead. Thanks in advance for the answer :D
Mike Matt excellent job on the install I just have one question why do you guys always put the power cord low like that when I did mine I mounted my power box up above the power washer it looks so much cleaner. 👍
Hi, can you guys build one exactly like that with those dimensions and ship it?, my concern it’s the piping cuts I don’t want to buy a lot of material and have to buy all the right tools, exactly that set up. Please let me know thanks
That looks like it may be a General Pump made pressure washer. American pressure washers tend to be pretty janky. 1.5 GPM rated, means it's going to be less than that in the real world.
Don't waste your $$. Just get a Kranzle and be done with it. Best $$ I've ever spent getting one coming from a Chinese unit. You won't regret it I promise!
Hey Matt, I know it’s a pain to travel in this case freeze but the videos are worth it. The banter between you and Mike it’s as good as seeing the project come together have a good one…
Mike, GREAT job as always!! AND no leaks. Oh, and good job Matt on the camera work.
Mike works his ass off!!
Mike is so patient with Matty holy crap haha
Mike, you are a Master Craftsman! Thanks for sharing the journey, Matt!!
The setup turned out great. It was great meeting you guys on last Saturday! Hope to come visit OGHQ sometime in the future.
Looks great! I hope that no one accidentally puts the diverted valve in the wrong orientation or you are going to have the reel or boom end flailing around with HP water since you only have one gun. I would label the heck out of that to valve!!!
So much fun seeing this come to life in person
Damn, Mikes amazing. Does a drywall job with only a 4” and a 14” knife. I’ve been training drywall finishers my entire career and can’t do that 😂
Matt it always cracks me up when you say don't be a sissy about tightening those hose ends the first Cobra jet hose I purchased from you a 25-footer cuz I needed something in a pinch leaked like a sieve from you guys. I had to pull it all apart and tighten it not like a sissy. 😁👍
This would have been helpful about 2 weeks ago when I spliced my power cord in the middle. I ended up with a “wonk” too. Luckily I can hide it behind the washer. Initially I was going to solder in the actual plug but opted against it.
Amazing job! It's great to see this whole setup evolve over time. Also, great that the vented cap fixes the pressure issues on the 1322. That issue seemed to be a really tricky one to pinpoint. 🙌🏼🙏🏼
Matt I fully understand the sticker comment I absolutely hate that from manufacturers a little trick for you guys use a lighter fluid to remove the sticker it will take the adhesive off perfect it does not affect any plastics it works awesome. If lighter fluid is not available you can use Naphtha
I had a quick question that I saw you answered a few years back, but now there are other options available. What pressure washer would you suggest to purchase excluding Kranzle? I don't know if I want to drop that much on a pressure washer yet and my Ryobi is dying/dead. Thanks in advance for the answer :D
You’d want the Active.
Nice job Gents! Looks awesome!!
Mike Matt excellent job on the install I just have one question why do you guys always put the power cord low like that when I did mine I mounted my power box up above the power washer it looks so much cleaner. 👍
Both work. This one was just for simplicity to mount the box on top of the blocking.
I wrap the hose on the reel then drop it all in hot water. Then it's perfect !
I fully support a video where you two switch rolls. Would be comedy gold!
No wire nuts, Wago 221 Lever Nuts! Thought this was Obsessed?!?
How can I get the kranzle vented oil cap to update my unit
Hi, can you guys build one exactly like that with those dimensions and ship it?, my concern it’s the piping cuts I don’t want to buy a lot of material and have to buy all the right tools, exactly that set up. Please let me know thanks
I died laughing at this “my tongue is permanently damaged… I’m a finisher”
Matt, have you guys ever looked at or thought about testing the John Deere Hand Carry Pressure Washer (HR-1400E)?
That looks like it may be a General Pump made pressure washer. American pressure washers tend to be pretty janky. 1.5 GPM rated, means it's going to be less than that in the real world.
Does the pressure washer come with the bigger cap that replaced the venting cap you threw away?
Mike is legit.
"You gotta train your hose."
New t-shirt idea 😅😅😅
Are those labels from CR or the canister manufacturer?
What you think of the ar-620 pressure washer. I was thinking about buy one to upgrade from my ryobi.
Don't waste your $$. Just get a Kranzle and be done with it. Best $$ I've ever spent getting one coming from a Chinese unit. You won't regret it I promise!
Ok Matt. I am the light guy on the garage doors. How about high lift garage doors. So clean and out of the way.
High lift doors are great. Lights on the door is goofy.
Even tho I don’t have a garage, I’m considering subscribing.
Giveaway winner
I wish I Could install mine but guess what I haven't received it yet when when I get my pressure washer
We ordered this sucker in September to hold it for the January giveaway.
What kind of hardware are you using to bolt the pressure washer shelf to the wall?
#12 construction screws
@@MikeFigueira do you not screw the shelf to to the wall angle brackets?
@@stevel3881 Yep, #12 screws attach the included brackets to the wall and the shelf sits on the brackets
Woot
25:04 👀
What brand and model is that blue adjustable spanner wrench
It's a Prevost
I aspire to be able to afford this setup lol
👀 9:54 Mike. A Makita? C’mon maaan!! 😂
Not mine, ha ha
Matt, I'll quit my job right now and work for you for free
Not gonna lie, going from ": E1" to "- Part 2" has me unreasonably triggered.
Is it me or does it sound like Matt constantly has his mouth stuffed full of food every time he's talking or taking video. Kinda gross!
There may have been a sucker involved for some of the footage
He was getting over a cold.
He might have been eating one of the donuts that were there
How hard is it to get a water hook up in your garage if there is no spigot already ?
It depends on the situation. If it's block, it is harder. If it is drywall, you need to cut and repair.