DIY 3 Mode Automatic Bottle Filling Machine using Arduino
ฝัง
- เผยแพร่เมื่อ 18 มี.ค. 2020
- JLCPCB Prototype for $2(Any Color): jlcpcb.com
Good News!
Now you can order me to design a custom PCB for you!
www.fiverr.com/users/easyhome...
Features of this Machine:
1. 3-Modes (500ml, 350ml, 200ml)
2. Each mode can be calibrated separately
3. Automatic bottle detection
4. No bottle warning to prevent spill over the liquid
5. Filled bottle warning
6. Automatic servomotor lock for bottle holder
7. Clear instructions on LCD
8. Buzzer warning and led indicators
9. 28mm Bottle holder support different type of bottles
10. Can be operated on a 12V battery
List of Materials:
(Affiliate Links}
Water Pump:
www.banggood.com/custlink/3KK...
Zip Ties:
www.banggood.com/custlink/K3v...
2x16 LCD:
www.banggood.com/custlink/DmK...
Arduino Nano:
www.banggood.com/custlink/DKK...
Buzzer:
www.banggood.com/custlink/vvv...
LM7812CV:
www.banggood.com/custlink/m3m...
LM7805CV:
www.banggood.com/custlink/DvG...
DC Jack:
www.banggood.com/custlink/mmK...
DC Pin:
www.banggood.com/custlink/DKm...
Terminal Blocks:
www.banggood.com/custlink/3KG...
Tactile Button:
www.banggood.com/custlink/Gv3...
Male Female Header Pins:
www.banggood.com/custlink/3Dv...
Jumper Wires:
www.banggood.com/custlink/3DG...
Heat Sink:
www.banggood.com/custlink/D3D...
Spacers:
www.banggood.com/custlink/3GK...
Servo Motor:
www.banggood.com/custlink/Dvm...
Wooden Pieces Dimensions (inches):
A1 & A2= 10 x 0.75 x 0.5
B1= 2.5 x 0.75 x 0.5
Base= 8 x 4.5 x 0.75
Code & PCB GERBER:
serious people can buy it by contacting me on my fiverr page.
www.fiverr.com/users/easyhome...
3D Printer & Filaments:
Get ENDER 3-PRO Printer at 30% Off here: www.banggood.com/custlink/KDK...
23% off on Filament here: www.banggood.com/custlink/KGm...
BGender04 US$195
IMPORTANT:
Ask your customs department for restrictions and taxes on 3D Printer before ordering it.
Get Masks and stay safe!
www.banggood.com/Wholesale-su...
Note: Do not use this project for selling or re-uploading on any social site. only for personal use.
Also buy materials from given affiliate links. it will give me a little commission. Thanks
TOOLS:
Soldering Iron: goo.gl/cuAJQq
Soldering Paste: goo.gl/16xrgn
Third Hand Tool: goo.gl/5vCAiu
Multimeter :goo.gl/WxwQ2J
Battery % meter: www.banggood.com/custlink/GDv...
www.banggood.com/custlink/3K3...
Green Mat: www.banggood.com/custlink/KKm...
Like Us On Facebook:
goo.gl/rUxA5C
SUBSCRIBE HERE:
goo.gl/2Epk4x - แนวปฏิบัติและการใช้ชีวิต
Good work. Really needed this.
Hats off to you.
Great job keep it up.
A great example of Perfection and fine finishing...
Your video... amazing
Easily explanable..
With proper quidence...
Never give up 😊.
God bless 😇 u.brother...
Always be happy 😊
Assalam walekum bhai aapke pass chahie I m feeling automatic mein circuit mil
Great job and well spoken
sweet electronic and 3D designs
Its amazing! The way you constructed is wonderful.. 👌 👌
Vincent.
Excellent project 👍 I like it
main bhi is tarah ki videos banata hun naya channel start Kiya hai subscriber bahut kam hai please mere channel ko subscribe kar de sport me bro ♥️♥️♥️♥️🙏🙏👍
Nice Work . You Have Alot Of Skills.
Yup, but it will take almost 24 hours to print.
Sir please you contact number
Hats off bro.
Lovely & very useful project.Kindky say something about the beep sound, both program & hardware.
Thnx a lot....Good job... Bro
Nice project thank you
Keep going my friend
Cool project nice job☺
i need pcb.....pls give your location.
Good work
I wish all water filling machines could be programmed to fill certain volume
It looks very convenient
You could add manual mode buttons when there are no warnings when you want to fill something other than a bottle or to fill an unusual volume.
Nice Video!
P.S. I was waiting to see how to you solder all the components after you put them from top, but you skipped that part..
Cool project
Dear can you tell me
Are we use 6 pumps to fill the bottles with this
Good job 💯
sir you did not include the gerber file in the description....that is very sad.....it is impossible to design that circuit for people who are not expert or EEE students.
As he said, we must pay money it's not an open source, that's why we are all sad
How much money do you have to pay to get this file?
@@bijuarjunbijumv5646 You can hire him for your project on fiverr.Check video description.
Could anyone please explain how you are measuring the accuracy of the dispension
I am really interested, is it possible to do the same but with plastics? for liquid packaging?
Hello, why not try our lobe pump servo filler as key part or for you applicatons? Thanks,
this is a good home made project thanks , can we get the arduino program
Good information sir i like your video 🌹🌹💓💓💓😍😍👀👀👀👌👌👌👌
How this machine is going to detect the level filled?
How much time and delivery charge JLC pcb took?
Super project
is the pump and the pipe can be used for drinks? i mean, if this project is used for that, it would be worthless considering the drinks would be contaminated
why using a sensor? isn’t it used to detect water level? If yes, why having 3 modes for bottles capacity?
Mashallah Zabar dast bhai jan
Arslan Abdul Rahman pakistan?
Can this put 1 ml per minute only?
Is it use in soda machine
thank you boss.
Is there way to add credit card chip reader to activate the machine
Sukses selalu terimakasih informasinya, semoga video dan ilmu dalam tayangan ini membawa berkah. Amiin YRA. Salam penggemar channel ini yang sangat bermanfaat sekali, terimaksih...
Total price of this machine
Here, I can't understand. what sensor measure the volume of liquid
can use same Arduino and edit the code to make its filling 5 bottles in one time as example ?
hello, where can I find the product elements? as fiverr links are not working.
How much does it cost I want to purchase one machine like this....
How much does it cost a whole project?
please can you explain the diagram of the pub in an another video please
U r used IR obstacle sensor ...u r not provided purchase link
i was also looking for that. But have to say this setup is awesome have been looking for days to get something like this.
Excellent..
bro i wanted to supply the water at rate of 5 ml per second then how to control it any ide?a
It doesn't required flow sensor?
Where should i buy this thing?, in my country (Indonesia) there is no item like this one, and i need to buy it
Can we use it fill oil please respond
So cool
We can fill nytric acid by that machin? Plz replay
Great but try to include a hall effect sensor to find volume of flow
Brother can u tell me which sensor is use to measure fuel volume in litres use with arduino
Wow super
where can I get the codes for this project?
Can u provide it as kit which has all parts
This is a pretty neat little bottle filling machine, but I'm curious. I know it'll give you a warning if you try to fill a bottle again without replacing the bottle, but I would like to know if you could accidentally overfill a bottle of the wrong size? Would this little bottle filler be able to prevent that? Or are you just out of luck and have to clean the mess for your mistake? haha
nah i dont think so. it seems there is no part of the system to check the bottle size. it just know if there is a bottle or not. i mean, i think it is possible to make it to check the bottle size by putting another infrared sensor on the bottom of the bottle foot, facing up. so if it recognize there is an object above it a bit further, there might be a small bottle. if it close, then it might be a big bottle, etc.
Sir I want to make this project.
So I need project"s circuit board.And u also introduce me the cost of this project and full detail of this .
Bro how to change the vale of the liquid to 50ml
Can we make oil filling machine too?
Hello, sir
I am interested in your projects
my plan is to make this project, can you help me, the code, or I order the pcb and the code
How much will it cost for a 5 liter edible oil filling,
How can I buy that items? I have oil refiling business here in the Philippines. That's why I want
nice video
Can you send me the whole project? and what will be it's costs?
do you sell the code and the project what value?
I wanna buy one. Can you please arrange one for me. I need also 1 Liter capacity along with them.
I need this product, prepared by you.
How much for this.
awesome
main bhi is tarah ki videos banata hun naya channel start Kiya hai subscriber bahut kam hai please mere channel ko subscribe kar de sport me bro ♥️♥️♥️♥️🙏🙏👍
Kia hum ye circuit single Mode ke lea use kr skty hai?
many people theys are asking how he has mesure the level of bootle, but is easy he put the delay which is neccessary to full up the bottle, for exemole to the bootle of 500cl, he put for exemple 200micros second to full it up.
he has mesurer it according to the time which is need to make full a bottle, to make full the bootle of 500ml is not the same with the bootle of 100ml or 300ml
In this can we modify the coding for required quantity litre
Yes, just change the amount parameter in the code
Maybe add cooling system with fan for the drink
Can this machine be used for sauce?
What will be its cost? Can you arrange one for me
What will be price of this project and how can i buy this kindy give me information i want to buy two pieces
What is the price of this overall project
hi.. can you send me the details for this.. and can u make 12pcs of this.. i will pay for it
Petrol bhi count kar sakta hai kya
Please tell me D882 substitute??
Dear. Can we make 20 ltr paint filling machine. If yes please help me Brother
Adrino ko coding kese keya jata he??
Hi Dude, awesome work. We are looking for this kind of small project, what is the best way to contact you. I hope you do freelancing.
Mujhay ye chaeye 220 ki moter use karni hay
Or filling capacity 700 or 1000 ho
Kitne ka bana kedogay
Reply zaroor karna
Babar gill Lahore
Hi I want to buy this. Are you selling?
Nice
link of the program
if you want
Greetings, Bro how you have measured ml of water ? Have you used flow senser or any other thing ?? kindly reply me
Timing
Hi what is the cost of this machine?
Can we make this ac not dc
Bro next video make electric soldring iron pliz
How does one really acquire such skills? I so want to be good at this.
Programming
This can only be used for transparent plastic bottles as he is using IR sensor as a limit sensor.
el sensor no lo usa para el nivel de liquido en la botella, es para que el mecanismo sepa que hay una botella lista para ser llenada y luego no deja activar de nuevo hasta que se retire la botella llena y se cambie por otra.
What will be the total cost of the project?
How it is even recognize the quantity? Which sensor is measuring the quantity?
For what I understood, the water pump fills the same ammount of mililiter in a given time,so I suppose he must measure how much time the machine must stay on(example: the pump fills 100 ml in 5 seconds, so he must turn on the pump, the arduino count 25 seconds to fill 500ml and then turn off).
my calculations are just an example,and if he does like this, he must measure how much tube he is using and adjust the time based on the lenght of it , because the tube carry the liquid and have an inside volume.
@@joaofelipe2060 thanks bro....maybe you are correct
Where i can buy
Component
Hi... Were i will get the code..
Very Nice. I have a question. How do you know that the bottle is filled? I saw only one optical sensor.
Time dependent filling
@@EasyHomeMadeProjects sorry I was not clear. I mean, when you already filled the bottle if you push start botton there is a warning. Since I saw only optical sensor that detects if there is the bottle; which sensor detects that the bottle is filled and before to start again the pump you have to change the bottle?
HOW TO BY THE SPARS
Complete pcb price?