Just finished replacing the broken part, and my 2280DW is once again loading paper. Before I came across your video, I was prepared to accept needing a new printer. Your instructions were flawless. Thank you so very much.
Excellent video. Very clear, detailed step-by-step instructions. No annoying music, no camera shaking around, and you were very understandable. The way a how-to video should be done. Also, thank you so much for posting this. It kept me from having to buy a new printer.
Thank you! Besides helping me to fix my printer (ok, I haven't done it yet, but I am hopeful) this should be required viewing for anyone recording a how-to video. Clear, concise descriptions, a voice that can be understood, no music drowning out the narrative, with a clear view of the parts and pieces throughout. A master class in how to do a "how to do"!
This video saved me from purchasing a new laser printer. I couldn’t agree more with your comment. This video is remarkable. Thank you for contributing to the You Tube body of knowledge, I greatly appreciate your contribution!
Thanks for the help. I followed the instructions and the printer works again. The biggest problem was getting side off. 2270DW. I never was able to find clear visuals of the clips etc. I did it all from beginning to end. Truly appreciated.
You've saved another one from the junk yard! MFC-7460DN - One thing to add: before being able to get the "head" seated behind the cam, FIRST I had to get the piece fully seated on the bottom part, where the "foot" had to be flexed a bit in order to articulate with the slot in the machine. Once I got that inserted, it was easy to get the head easily flexed behind them cam (without the "foot" inserted, the "head" kept popping out from the cam). Thank you so much! $8 for the part (and half an hour) saved my printer (and me from having to replace it entirely). CHEERS !!!
This worked for my 11 year old MFC-7360N. Getting the replacement part properly seated was the trickiest part for me. Your video was invaluable: Excellent camera work and excellent verbal commentary. Thank you for sharing your knowledge. Much appreciated.
I got a $10 2270DW today with this problem. Followed the video with success. My cam lever was dislodged and not broken. Turns out my drum is near 100% but toner is around 20%. There was a NIB OEM drum and 2 Quill re-man toners for another $20 so I am all set. Saved a small bundle and kept a good printer out of the landfill. Thanks!
Thank you! This video saved us from getting rid of our printer and buying a new one. The $6 part we bought from Amazon was a whole lot cheaper. Your video was very clear and concise. If we ( a couple of seniors) could do this, then anyone can do it. Thank you for your helpful video.
It worked for a ten year old Brother HL-2275DW, THANK YOU! This saved me money, time and effort in not having to buy a new printer yet and this is also better for the environment. Much appreciated!
Well done on a very clear explanation of "the white lever", and how it slides out of position if the "tooth" gets broken. Probably most people will buy a replacement part in this case. However, on my HL2270DW I found I was able to form a stop on the shaft that holds the lever. I slipped an M4 nut over the end of the shaft, which leaves exposed a small amount of the shaft. I then used a soldering iron to melt the shaft inside the nut to hold it in place.
Great instructions. I worked for Xerox for 25 yrs. as a technical rep. I serviced the 914, 813, 4000 series copiers. It was easy for me to follow your instructions. I did notice that the cam may have had some lube on it. I think that a dab of some with lithium grease or vaseline couldn't hurt. Thanks, I can't kill this MFC-7860DW.
Excellent instructions! This video should be used as an example of what a how-to video should be like. No music, parts visible, and very good explanations with links to where to get the parts.
You're a freaking genius! I was about to give up on my over 10 year old MFC-7360n and was preparing to purchase a replacement. Then I watched the first part of your video, saw the white tab was dislodged on my printer. I used a hemostat to move it back into position, the error went away and I was able to print. THANK YOU! THANK YOU! THANK YOU!!!
Thank you so much for saving me from having to buy a replacement printer!!! I tried everything, including troubleshooting with Brother and looking at other videos, before finding this one. This is the ONLY one that solved the problem. The directions are clear and easy to follow. The trickiest part was getting the piece to sit where it should (such that both the square and the handle are in place). It had to be pushed further down than I initially thought.
Thank you!!! Clear and concise instructions. I was able to reposition the broken feeder cam, fill my paper tray, carefully put the tray back in and continue printing my documents. Ordered a new cam and will replace the broken one. You saved my day!
Thank you. AGAIN. This video fixed my problem a couple of years ago. I didn't replace the part - just shoved it back into place. Today, after a couple of years of it working fine, the same problem happened again. I couldn't remember the exact details so looked up this video again - shoved it over again and now I'm printing okay again. This time I've going to purchase the part and replace it.
Many thanks for this repair tutorial. Now I was able to repair the printer for 9 euros. You saved me buying a new printer again. This is now the second printer with the same problem. Luckily I still have the first one (slightly different type but same parts), which I will now also repair.
آپ نے بہت ہی عمدہ طریقے سے پرنٹر کو ٹھیک کرنے کا طریقہ بتایا ہے میرا پرنٹر ایچ ایل ٹو ون ٹو تھری زیرو ہے میں نے بڑی آسانی کے ساتھ اپنا مسئلہ حل کر لیا یا آپ کا بہت بہت شکریہ
Really clear instructions! I had some trouble getting the cam lever seated all the way in but it helped a lot to see how the little bit on the end latched in. Thanks so much!!!
Oh Sorry my good man my printer is a brother DCP7040. I was asking for the name of the broken part. I saw a lot of good comments. You well deserve it. It is a really great video. Very well explained
Thank you very much, you have saved a printer from landfill. I watched your video after a friend had a printer with the same fault. Checked the printer & the plastic tab was not in the right place, once removed I noticed it was broken. Ordered a part straight away. Thanks again.
Thank you so much for going through the effort of making this video, and making it so detailed. I was about to give up on my old printer that would have been more expensive to fix than it is worth. But I really didn't like the idea of having to get rid of a printer that up to a certain point served me without ever having any issues. That point was a house move as well, so I was pretty sure, something mechanical must have been going on. I just needed to nudge that little white plastic thing back into place and now it's working again! And if it ever breaks off completely, I know where to turn to to fix it again. Thank you for allowing me to not only save our wallet but also reduce waste that would have been completely unnecessary!
Great video. I fixed my printer for less than £5, and I was thinking of buying a new one. Mind you it wasn't as easy as the video made it look but I got there in the end!
Fantastic! I couldn't have done it without your help! Thank you so much for sharing this with the "Brother" world in need of repairs! Thank you printer doctor! Amen!
Thank you so much, exactly what I needed to know to fix my Brother HL2270DW printer. The tiny plastic nub was broken and barely hanging on. Bought a replacement part from Amazon for about $7 and fixed it!!! Only detail for the 2270, there is a retainer tab on the bottom of the side panel in exactly the middle that needs to be released by wedging that point downward on the side cover.
Thanks very much for your video. I used your video a few times to remember how to fix the little white tab on my HL-2270DW and today to do the full replacement. I ordered my replacement tab from AliExpress - $3.04 Cdn for two with free shipping. Took about 3 weeks for them to arrive but now all is perfect. Thanks
An excellent and very informative video. I followed the instructions (including the Amazon purchase), received the part within 18 hours of ordering, and was able to complete the repair. I am honestly amazed that it went so well and was so successful (with my fat fumble fingers). Thank you, thank you, thank you!
Excellent video and very easy to follow!! My husband was able to do the repair, from start to finish, in under 30 minutes. We also opted for the more expensive one-piece part that was delivered in one day. Thanks again!!
This was a great video, that spawned a fix at my end. One suggestion; between 7:30 and 8:00 of the video, perhaps mention that the tag ('tooth') needs to be inserted through the crescent-shaped guide in order to be fully seated properly. As soon as I saw that, everything was 'singing & dancing'. Thanks again!
As a TH-camr myself I needed this printer to work for my scripts. You made a video and it was amazing thank you. Bought the part on Amazon per your link for commission
It worked! I have had this Brother printer for 11 years and love it. Thanks for the clear instructions. Glad the printer did not end up in a junk yard. 😉
AHH thank you so much for this video, all the other info online that I was seeing just kept saying that the printer rolls were dusty and after I cleaned those nothing changed, I followed your directions and found out that the little tooth part on mine was broken as well! I ordered it off of your link and I'm hopeful that everything will be running smoothly after!
Thank you for taking the time to make this video. And for providing the link to replacement piece🙏 Mine chipped and that's why it's not staying in place. I was able to print a test paper before it slid back out. But thanks to you, I know the issue, and I should be set once the replacement arrives
OMG! IT FRACKING WORKED! I've been using my printer with the manual feeder for the last 2 years. hahahaha! Just had to put the white plastic piece in place. Thank you soooo much.
I've been so frustrated with my HL2240D for the past few weeks. So hard to find a replacement printer, or it now cost 3 times what I got it for a few years ago. I thought I needed to replace the paper tray, and ebay has them for at least 30 bucks or more with additional shipping cost! Your video was so thorough! I fixed it! Thanks!
Thanks, your tutorial works perfectly! The plastic part had the retainer lip broken off but I didn't feel like buying a new one. So I found a plastic collar in my parts bin and I pressure fit it over the black plastic peg that holds the faulty part in place. Maybe you can find a nut that would fit on the black peg so the fix is permanent. Great work!
Amazing video!! Instructions were very clear and simple. We got our printer working again!! Thank you very much for creating and sharing this video 👏🏼🙌🏼
Clear and easy instruction and especially for the exact replacement part link. Thank you for helping share how to repair, rather than discard large devices.
Awesome video. You got me up and running again. I moved recently and had the boxed printer in the uhaul. Guess it got bounced around to much. When taking it apart I found a tiny piece of broken white plastic on the feeder wheel. Put it all back together and now she works. You da man!
Thank you so much! Your video helped me found the broken feeder issue. For now it is working after re-position, not sure till when. Thank you again for the part number, ordered a new one. You are amazing...
Super clear step by step directions. Great work with camera and also accurate information. Just fixed one of them. Thank you very much for this video, god bless you!
Thank you!!! Easy to follow instructions. I too, was able to reposition the broken feeder cam, fill my paper tray, put the tray back in, and can print documents! I have ordered the new cam and will replace the broken one. Huzzah!!
Excellent video and instructions. It was that cam that came loose; and when I repositioned it the paper feed mechanism works well and my printer is back in service! Thanks a bunch. Saved me the aggravation of shopping for a new printer and hooking up to WiFi. - Charles 3/3/2022
Thank you so much! I had this exact problem and Fix #1 worked -- we'll see if the problem occurs again, but then I'll go to Fix #2. I love this printer, so thank you for sharing how to keep it running!
Awesome job filming and explaining, thank you very much, you helped me save my precious printer! ONLY thing I would add is, at 7:43, you slide the part underneath the cam gear and say "That's what you need it to do." then you are silent ... but we can HEAR the CLICK of the tooth (the part that was broken) attaching to the printer frame as you use your index finger and engage the part a little. But it will ONLY click and attach if you move it a little. So, at 7:45, I would add: "Then move or engage the part a little until you hear the CLICK of the tooth attaching to the frame."
@@thecollegepickerok, so now I have a new question, lol... The cam lever eventually gave up the ghost. Ordered a new one, installed it, etc. The white plastic tab doesn't seem to come through to the paper tray as much as the one in your video, and although it appears to lift up the front flap of paper, nothing slides through to the printer itself. Any suggestions on what to check?
Wow, you are an absolute godsend! Perfect video. I was this close to ditching this but paused about the landfill. A quick search and your video popped on the search. Keep rocking with instructional videos like these. Thanks a bunch!
Thanks for this repair guide! This repair was very easy with your clear video instructions. I was able to fix my MFC 7460DN. I ordered two replacement parts from Amazon in case it fails again in the future.
You are a genius, my brother printer had the same issue, your video helped me in fixing the issue, your explaination was so easy to understand, I followed your instruction & my printer got fixed, thank you so much.
Thanks a lot, I was able to fix my printer with your video instruction, very clear and to the point. especially the part about taking off the side cover.
THANK YOU!!!! My Brother was giving me fits!!! Just moved and the printer worked before the move! Looks like that little plastic piece that you were describing at about 6:21 was the culprit finally got it seated correctly and Boom Printing Worked again! You Rock/1
Great tutorial. I'm really glad to be able to fix this. I really don't want to buy a new printer now that they've put DRM into a lot of the cartridges.
Thanks for this! The little tab on mine just broke today, thankfully I can still print things by feeding manually until my replacement part comes in. I feel confident that I can follow these instructions and get the part replaced.
Update: I did it! It was a bit more difficult than I thought to get the piece seated on the black peg (sorry can't remember what you called it) but I managed to get it on. I've printed several things and everything is working as expected! :D
![Brother Printer No Paper Error [FIXED] Orange Solid LED on 2270DW](http://i.ytimg.com/vi/tQiQ4ihgiIA/mqdefault.jpg)
![งมหอย จับปลา มือเปล่า หาอยู่หากินแบบวีถีอีสานกับแก๊งเซียนหรั่ง ม่วนคัก! [ขอนแก่น] @Sianstudio](http://i.ytimg.com/vi/JEJZg6N-AbU/mqdefault.jpg)
Was ready to pull the trigger and buy a new printer, then found your video. THANK YOU! Crystal clear directions.
Just finished replacing the broken part, and my 2280DW is once again loading paper. Before I came across your video, I was prepared to accept needing a new printer. Your instructions were flawless. Thank you so very much.
You are welcome. Kept one out of the trash 👍
Excellent video. Very clear, detailed step-by-step instructions. No annoying music, no camera shaking around, and you were very understandable. The way a how-to video should be done. Also, thank you so much for posting this. It kept me from having to buy a new printer.
Appreciate you 👍
Thank you! Besides helping me to fix my printer (ok, I haven't done it yet, but I am hopeful) this should be required viewing for anyone recording a how-to video. Clear, concise descriptions, a voice that can be understood, no music drowning out the narrative, with a clear view of the parts and pieces throughout. A master class in how to do a "how to do"!
This video saved me from purchasing a new laser printer. I couldn’t agree more with your comment. This video is remarkable. Thank you for contributing to the You Tube body of knowledge, I greatly appreciate your contribution!
Thanks for the help. I followed the instructions and the printer works again. The biggest problem was getting side off. 2270DW. I never was able to find clear visuals of the clips etc. I did it all from beginning to end. Truly appreciated.
Happy to help 🤝
You've saved another one from the junk yard! MFC-7460DN - One thing to add: before being able to get the "head" seated behind the cam, FIRST I had to get the piece fully seated on the bottom part, where the "foot" had to be flexed a bit in order to articulate with the slot in the machine. Once I got that inserted, it was easy to get the head easily flexed behind them cam (without the "foot" inserted, the "head" kept popping out from the cam). Thank you so much! $8 for the part (and half an hour) saved my printer (and me from having to replace it entirely). CHEERS !!!
This worked for my 11 year old MFC-7360N. Getting the replacement part properly seated was the trickiest part for me. Your video was invaluable: Excellent camera work and excellent verbal commentary. Thank you for sharing your knowledge. Much appreciated.
I got a $10 2270DW today with this problem. Followed the video with success. My cam lever was dislodged and not broken. Turns out my drum is near 100% but toner is around 20%. There was a NIB OEM drum and 2 Quill re-man toners for another $20 so I am all set. Saved a small bundle and kept a good printer out of the landfill. Thanks!
Thank you! This video saved us from getting rid of our printer and buying a new one. The $6 part we bought from Amazon was a whole lot cheaper. Your video was very clear and concise. If we ( a couple of seniors) could do this, then anyone can do it. Thank you for your helpful video.
Glad I could help! Good work!
It worked for a ten year old Brother HL-2275DW, THANK YOU! This saved me money, time and effort in not having to buy a new printer yet and this is also better for the environment. Much appreciated!
Love hearing that. You are very welcome
Well done on a very clear explanation of "the white lever", and how it slides out of position if the "tooth" gets broken. Probably most people will buy a replacement part in this case. However, on my HL2270DW I found I was able to form a stop on the shaft that holds the lever. I slipped an M4 nut over the end of the shaft, which leaves exposed a small amount of the shaft. I then used a soldering iron to melt the shaft inside the nut to hold it in place.
Great solution! Glad I was able to help.
Great instructions. I worked for Xerox for 25 yrs. as a technical rep. I serviced the 914, 813, 4000 series copiers. It was easy for me to follow your instructions. I did notice that the cam may have had some lube on it. I think that a dab of some with lithium grease or vaseline couldn't hurt.
Thanks, I can't kill this MFC-7860DW.
Crystal clear directions. So much easier than a manual. Thanks. Saved us from getting a new printer.
You are welcome. Saved it from the trash is mission complete in my book 🙌
Excellent instructions! This video should be used as an example of what a how-to video should be like. No music, parts visible, and very good explanations with links to where to get the parts.
Excellent video. I've seen others that have no dialog or speed up some of the steps to the point of being useless. This was detailed and to the point.
You're a freaking genius! I was about to give up on my over 10 year old MFC-7360n and was preparing to purchase a replacement. Then I watched the first part of your video, saw the white tab was dislodged on my printer. I used a hemostat to move it back into position, the error went away and I was able to print. THANK YOU! THANK YOU! THANK YOU!!!
Thank you so much for saving me from having to buy a replacement printer!!! I tried everything, including troubleshooting with Brother and looking at other videos, before finding this one. This is the ONLY one that solved the problem. The directions are clear and easy to follow. The trickiest part was getting the piece to sit where it should (such that both the square and the handle are in place). It had to be pushed further down than I initially thought.
Thank you!!! Clear and concise instructions. I was able to reposition the broken feeder cam, fill my paper tray, carefully put the tray back in and continue printing my documents. Ordered a new cam and will replace the broken one. You saved my day!
Happy to help Bob. Glad you got it going temporarily and going for the future permanent 👍
Thank you. AGAIN. This video fixed my problem a couple of years ago. I didn't replace the part - just shoved it back into place. Today, after a couple of years of it working fine, the same problem happened again. I couldn't remember the exact details so looked up this video again - shoved it over again and now I'm printing okay again. This time I've going to purchase the part and replace it.
You are welcome again. Happy to help!
You are truly the best. my hubby fixed this and I am one happy lady!! You are the gift that keeps on giving!! hugs!
Wow good on him! This isn't a super easy fix. So happy to hear that 💪
Many thanks for this repair tutorial. Now I was able to repair the printer for 9 euros. You saved me buying a new printer again. This is now the second printer with the same problem. Luckily I still have the first one (slightly different type but same parts), which I will now also repair.
آپ نے بہت ہی عمدہ طریقے سے پرنٹر کو ٹھیک کرنے کا طریقہ بتایا ہے میرا پرنٹر ایچ ایل ٹو ون ٹو تھری زیرو ہے میں نے بڑی آسانی کے ساتھ اپنا مسئلہ حل کر لیا یا آپ کا بہت بہت شکریہ
Really clear instructions! I had some trouble getting the cam lever seated all the way in but it helped a lot to see how the little bit on the end latched in. Thanks so much!!!
You are welcome ☺️
Thank you for saving me much frustration with my Brother HL2270DW. Much appreciated!
So glad I stumbled across this, just fixed my DCP-7055W with the first fix thing having put up with it intermittently drawing paper for months!
I had to watch it several times, but got it working. Thank you for such a detailed video!!
I fixed my mom's MFC-7360N with this video. It took 2 attempts, but it worked. Thanks!
I tried to install my new cam lever 5 time. Viewd 5 or 6 TH-cam videos. Yours is the only one that really showed me how to do it. Thanks.
You are welcome 🤝
Oh Sorry my good man my printer is a brother DCP7040. I was asking for the name of the broken part. I saw a lot of good comments. You well deserve it. It is a really great video. Very well explained
Thank you very much, you have saved a printer from landfill. I watched your video after a friend had a printer with the same fault. Checked the printer & the plastic tab was not in the right place, once removed I noticed it was broken. Ordered a part straight away. Thanks again.
You are welcome. Printer thanks you as well as mother Gaia 🤝
Thank you so much for going through the effort of making this video, and making it so detailed. I was about to give up on my old printer that would have been more expensive to fix than it is worth. But I really didn't like the idea of having to get rid of a printer that up to a certain point served me without ever having any issues. That point was a house move as well, so I was pretty sure, something mechanical must have been going on. I just needed to nudge that little white plastic thing back into place and now it's working again! And if it ever breaks off completely, I know where to turn to to fix it again. Thank you for allowing me to not only save our wallet but also reduce waste that would have been completely unnecessary!
I was already looking for a new printer and thought, check TH-cam. Thank you so much for your tutorial video. This worked!
Great video. I fixed my printer for less than £5, and I was thinking of buying a new one. Mind you it wasn't as easy as the video made it look but I got there in the end!
Fantastic! I couldn't have done it without your help! Thank you so much for sharing this with the "Brother" world in need of repairs! Thank you printer doctor! Amen!
You are very welcome. Happy to help 🤝
Thank you so much, exactly what I needed to know to fix my Brother HL2270DW printer. The tiny plastic nub was broken and barely hanging on. Bought a replacement part from Amazon for about $7 and fixed it!!!
Only detail for the 2270, there is a retainer tab on the bottom of the side panel in exactly the middle that needs to be released by wedging that point downward on the side cover.
Thanks very much for your video. I used your video a few times to remember how to fix the little white tab on my HL-2270DW and today to do the full replacement. I ordered my replacement tab from AliExpress - $3.04 Cdn for two with free shipping. Took about 3 weeks for them to arrive but now all is perfect. Thanks
An excellent and very informative video. I followed the instructions (including the Amazon purchase), received the part within 18 hours of ordering, and was able to complete the repair. I am honestly amazed that it went so well and was so successful (with my fat fumble fingers). Thank you, thank you, thank you!
Excellent video and very easy to follow!! My husband was able to do the repair, from start to finish, in under 30 minutes. We also opted for the more expensive one-piece part that was delivered in one day. Thanks again!!
You are welcome. Good work hubby! 👏
I was ready to buy new printer. clear instruction and fixed it with just 13$. THANK YOU!!
Well filmed. Well narrated. Clearly and simply explained. Great video. Thanks.
I appreciate your appreciation
Thank you so much! Perfectly detailed and informative. You saved me from buying a new printer
Thank you so much for this! Saved my printer and my sanity! truly appreciate the time and effort put into this incredible how to video!!
This was a great video, that spawned a fix at my end. One suggestion; between 7:30 and 8:00 of the video, perhaps mention that the tag ('tooth') needs to be inserted through the crescent-shaped guide in order to be fully seated properly. As soon as I saw that, everything was 'singing & dancing'. Thanks again!
So easy when you see what's needed
Downloading the manuals were useless.
Than you so much.
As a TH-camr myself I needed this printer to work for my scripts. You made a video and it was amazing thank you. Bought the part on Amazon per your link for commission
Glad it helped!
It worked! I have had this Brother printer for 11 years and love it. Thanks for the clear instructions. Glad the printer did not end up in a junk yard. 😉
You're welcome! Merry Christmas
I am glad I stumbled on this video. You saved me money with this quick fix. I really appreciate your help. 😊
I normally don't leave comments, but the instructions were clear and I feel, very thought out to make this an easy fix, thanks.
Happy to help and happy to hear the feedback 🙏
AHH thank you so much for this video, all the other info online that I was seeing just kept saying that the printer rolls were dusty and after I cleaned those nothing changed, I followed your directions and found out that the little tooth part on mine was broken as well! I ordered it off of your link and I'm hopeful that everything will be running smoothly after!
Followed the instructions and now my print works!! 🙏🏾 🎉
Thank you for taking the time to make this video. And for providing the link to replacement piece🙏 Mine chipped and that's why it's not staying in place. I was able to print a test paper before it slid back out. But thanks to you, I know the issue, and I should be set once the replacement arrives
OMG! IT FRACKING WORKED!
I've been using my printer with the manual feeder for the last 2 years. hahahaha!
Just had to put the white plastic piece in place.
Thank you soooo much.
I have HL-2130 and after your instruction video, I was able to fix it ver easily and to the point. I even used the old part ... :) Thank you so much
I've been so frustrated with my HL2240D for the past few weeks. So hard to find a replacement printer, or it now cost 3 times what I got it for a few years ago. I thought I needed to replace the paper tray, and ebay has them for at least 30 bucks or more with additional shipping cost! Your video was so thorough! I fixed it! Thanks!
You are welcome. Happy to save you time money and stress. 💪
This is a better video with clearer instructions than the other videos I have seen. Well done sir! Thank you.
Thank you 🙏
Thanks, your tutorial works perfectly! The plastic part had the retainer lip broken off but I didn't feel like buying a new one. So I found a plastic collar in my parts bin and I pressure fit it over the black plastic peg that holds the faulty part in place. Maybe you can find a nut that would fit on the black peg so the fix is permanent. Great work!
That cam did it for me, overnighted a replacement and was back on track, thanks so much!
Good deal!
Great instructions! Easy to follow. I was able to fix my printer just by following steps from this video. Thank you!
Amazing video!! Instructions were very clear and simple. We got our printer working again!! Thank you very much for creating and sharing this video 👏🏼🙌🏼
Thanks! You saved my printer! The cam lever tab was hidden after transport and storage.
Thank you! I fixed my printer thanks to your video! Good explanation.
finally you win there must be 20 or more and after 8 or more yours is the clearest most concise
thank you
Appreciate the win 🙏
I don’t usually comment on videos, but I had to for this one. Excellent Tutorial!!!!!!!!
The hack on the paper tray worked and saved my bacon..Thanks!!!! I thought my printer had gone belly-up!!
You are welcome. Happy to help
Clear and easy instruction and especially for the exact replacement part link. Thank you for helping share how to repair, rather than discard large devices.
Awesome video. You got me up and running again. I moved recently and had the boxed printer in the uhaul. Guess it got bounced around to much. When taking it apart I found a tiny piece of broken white plastic on the feeder wheel. Put it all back together and now she works. You da man!
Good work! Happy to help. Enjoy your new place 🤝
Thank you so much!
Your video helped me found the broken feeder issue. For now it is working after re-position, not sure till when. Thank you again for the part number, ordered a new one.
You are amazing...
You are welcome. Happy to help
Super clear step by step directions. Great work with camera and also accurate information. Just fixed one of them. Thank you very much for this video, god bless you!
Thank you!!! Easy to follow instructions. I too, was able to reposition the broken feeder cam, fill my paper tray, put the tray back in, and can print documents! I have ordered the new cam and will replace the broken one. Huzzah!!
You are welcome. Good work!
Great tutorial! Fixed the problem. My part just jumped off and had to be put back into place
Excellent video and instructions. It was that cam that came loose; and when I repositioned it the paper feed mechanism works well and my printer is back in service! Thanks a bunch. Saved me the aggravation of shopping for a new printer and hooking up to WiFi. - Charles 3/3/2022
Thanks for watching Charles, happy to help 😃
Thank you for the detailed instructions 👍 So glad I didn't have to get a new printer.
Thanks for taking the time to do this video. I pulled the side cover off and found the clip was out of place so I reseated it and it is working great.
Thank you so much! I had this exact problem and Fix #1 worked -- we'll see if the problem occurs again, but then I'll go to Fix #2. I love this printer, so thank you for sharing how to keep it running!
You are welcome. Another one saved from a landfill ✅
Awesome job filming and explaining, thank you very much, you helped me save my precious printer! ONLY thing I would add is, at 7:43, you slide the part underneath the cam gear and say "That's what you need it to do." then you are silent ... but we can HEAR the CLICK of the tooth (the part that was broken) attaching to the printer frame as you use your index finger and engage the part a little. But it will ONLY click and attach if you move it a little. So, at 7:45, I would add: "Then move or engage the part a little until you hear the CLICK of the tooth attaching to the frame."
Brilliant! Thank you. I'm so glad I don't have to buy a new printer and figure out how to dispose of one. ❤❤❤
Thank you very much, you were right on and just ordered the broken feeder part, you just saved me a new printer!
You are welcome. And saved some trash from the landfill 😺
I would have given this printer to goodwill if I hadn't found this. Exactly my problem. Thanks for the clear instructions!
You are welcome 🤠
I had to pull the tab back in! Thanks for the help!! Today was a stressful enough day.
Glad it helped!
@@thecollegepickerok, so now I have a new question, lol...
The cam lever eventually gave up the ghost. Ordered a new one, installed it, etc. The white plastic tab doesn't seem to come through to the paper tray as much as the one in your video, and although it appears to lift up the front flap of paper, nothing slides through to the printer itself.
Any suggestions on what to check?
Excellent video. I used your instructions and the links and managed to fix my printer. Thank you very much.
Wow, you are an absolute godsend! Perfect video. I was this close to ditching this but paused about the landfill. A quick search and your video popped on the search. Keep rocking with instructional videos like these. Thanks a bunch!
Saved it from the 🗑️. 👍 Happy to help.
Thanks for this repair guide! This repair was very easy with your clear video instructions. I was able to fix my MFC 7460DN. I ordered two replacement parts from Amazon in case it fails again in the future.
Good job, man, your video worked perfectly for a DCP-7065dn and so I saved 200 euros of a new printer, thanx a lot!
You are welcome 🤠 happy to help you save them euros
You are a genius, my brother printer had the same issue, your video helped me in fixing the issue, your explaination was so easy to understand, I followed your instruction & my printer got fixed, thank you so much.
You are welcome. But I am not a genius 🙂 😂 🙏🙏
Thank so very much. Mine was loose.. fixed with your instructions. I am a happy girl now!
Awesome, crystal clear instructions, worked like a charm (used existing cam lever) that had become dislodged. Very pleased with video..
Thank you so much for this video; I was able to fix my printer and get it working. Very clear and understanding instructions. Truly appreciated.
Great video! I've looked at others and yours has the bese (by far!) video and description of all the details.
amazing video, helped save my printer 5 stars! followed your directions to the T
Realigned the cam lever tab and Bob's your uncle. Thank so much!
That is awesome!
Thanks a lot, I was able to fix my printer with your video instruction, very clear and to the point. especially the part about taking off the side cover.
You are welcome, did you have to replace the part?
Holy crap dude you saved my printer. Thank you
THANK YOU!!!! My Brother was giving me fits!!! Just moved and the printer worked before the move! Looks like that little plastic piece that you were describing at about 6:21 was the culprit finally got it seated correctly and Boom Printing Worked again! You Rock/1
You are welcome. Good work and diagnostic 🤝
Great tutorial. I'm really glad to be able to fix this. I really don't want to buy a new printer now that they've put DRM into a lot of the cartridges.
Eric, You have explained it well, so methodical Thank you
You are welcome. I strive to do it as such 🙏🙏
Thank you!!!
This takes the fear out of trying to get ths fixed. It's clear, it's concise, and hopefully will work out for me.
Great video. I was able to fix my Brother printers just for a couple of bucks. Thank you
Loved the unhappy face and the guys with the bat - so glad I don't have to smash up MY printer!! Thanks so much.
Thanks for this! The little tab on mine just broke today, thankfully I can still print things by feeding manually until my replacement part comes in. I feel confident that I can follow these instructions and get the part replaced.
Update: I did it! It was a bit more difficult than I thought to get the piece seated on the black peg (sorry can't remember what you called it) but I managed to get it on. I've printed several things and everything is working as expected! :D
Excellent work! This was no easy task 👏👏👏
Totally worked! Loved the concise detailed explanation. Thanks!