I gave my Ferguson TO20 to my neighbor. He is 82 years old ! I purchased it for a yard ornament. Thank you for all your hard work showing us the ins and outs of these old-time tractors
Only Massey I got is my brother's (Grandad's old Tractor) Massey Harris Pony. Still like to watch and learn from your videos. You both are in a Class all by yourself. Keep On Tractoring!!!
Doing a rebuild on my 52... opened it up and 1 pushrod has a nice "S" shape and 2 have an arch... now I'm going from pistons and sleeves to cam and valve train also... but after it's done I'll have a solid tractor for the next 20 years...👍
Enjoy all your videos. Would love to see an old case loader tractor master cylinder replacement. They have two master cylinders. Thanks & keep the videos coming
I made a guide press tool out of one of the punches from my Harbor Freight set. I measured the installed height and made a cup to go on the punch so that when it bottoms out, the guide is at the proper depth. It is long enough to push out the old one and push the new one in all in one shot. I don't believe in hammering the guides in, I used my press.
Having a problem finding a rubber bushing kit, for my 1940 ford 9-N front end hydraulic loader pump shaft, in the end of the crank pulley??? Thanks BigAl California
@@Nudnik1no it’s 4 pin hub end on the left-left hand shaft that turns the hydraulic pump ,,,they are 3/4 inch deep and 1 inch in o.d. Size,thanks , nothing to do with seals or o rings thanks buddy
I have a question. I have a Massey Ferguson 175 with a hydraulic problem, We opened the lid to fix a PTO problem that we still can't fix but now the hydraulics are not working the lifter arms have full pressure and they will not go down. They used to go up and down just fine until we tried to fix the PTO shut-off handle inside the Hydraulic area. Can you tell me what I did wrong?
This video would benefit you if you are working on the Delco distributor, Rachel also discusses timing in this video. While she demonstrates on a JD, the principles will apply to your MF (look up the timing order and direction for your specific model as that does vary). th-cam.com/video/Y0ch-o5w-xU/w-d-xo.html
Just sold my 53 ferguson before I found her on this. I could listen to her all day. Speaks so clearly very knowledgeable also beautiful
I have a 53 Ferguson and it's still running great !!! They don't make them like that anymore.
I gave my Ferguson TO20 to my neighbor. He is 82 years old ! I purchased it for a yard ornament. Thank you for all your hard work showing us the ins and outs of these old-time tractors
I could listen to Rachel read a phone book.. Reminds me of home with her Mid-Western drawl..
She has a channel for that, it's Rachel reads the phone book on TH-cam. I just listened to the Omaha phone book, it was awesome!! Lol
Do you have tractors for sale?
Rachel, what a beautiful explanation we saw about installing the valve and guide for the head✋
Only Massey I got is my brother's (Grandad's old Tractor) Massey Harris Pony. Still like to watch and learn from your videos. You both are in a Class all by yourself.
Keep On Tractoring!!!
Doing a rebuild on my 52... opened it up and 1 pushrod has a nice "S" shape and 2 have an arch... now I'm going from pistons and sleeves to cam and valve train also... but after it's done I'll have a solid tractor for the next 20 years...👍
Enjoy all your videos. Would love to see an old case loader tractor master cylinder replacement. They have two master cylinders. Thanks & keep the videos coming
Excellent job . Rotators on exhaust valves and copper coat on head gasket best quality repair 👍
Should you clean and grind the valve too?
Awesome! This is one I can definitely use.
Very nice great job and always great information!!!
Great video with concise information.
Excellent video!
Great video Rachel !!!!!!!!!!!!!!! Awesome job !!!!!!!!!
I made a guide press tool out of one of the punches from my Harbor Freight set. I measured the installed height and made a cup to go on the punch so that when it bottoms out, the guide is at the proper depth. It is long enough to push out the old one and push the new one in all in one shot. I don't believe in hammering the guides in, I used my press.
Thanks for you and your father's help
I didn’t see it in the video, but how are the head bolts by the spark plugs being torqued if there’s no room to fit the socket in?
Super vids.. Thank you!!!
Thank you so much for your videos.
Tell your dad , Anthony loves❤you😊
Having a problem finding a rubber bushing kit, for my 1940 ford 9-N front end hydraulic loader pump shaft, in the end of the crank pulley??? Thanks BigAl California
Hercules hydraulic seals Florida has by size all seals packings orings .
@@Nudnik1no it’s 4 pin hub end on the left-left hand shaft that turns the hydraulic pump ,,,they are 3/4 inch deep and 1 inch in o.d. Size,thanks , nothing to do with seals or o rings thanks buddy
Great tuition
I have a question. I have a Massey Ferguson 175 with a hydraulic problem, We opened the lid to fix a PTO problem that we still can't fix but now the hydraulics are not working the lifter arms have full pressure and they will not go down. They used to go up and down just fine until we tried to fix the PTO shut-off handle inside the Hydraulic area. Can you tell me what I did wrong?
Dad looks like a supervillain in those safety glasses
Very good job
do you do any work on the 1920 new holland tractor
thanks
You did not lap the valves in before installing??
Are u guys going to to a distributor install video?
This video would benefit you if you are working on the Delco distributor, Rachel also discusses timing in this video. While she demonstrates on a JD, the principles will apply to your MF (look up the timing order and direction for your specific model as that does vary). th-cam.com/video/Y0ch-o5w-xU/w-d-xo.html
great info
how much the valve should be adjusted?
How would I go about purchasing parts from you?
❤راشيل انت ميكانيكا وتوضيح للمشاهدين عمل احسن مع الخبير الوالد في الصيانة ❤
Rachel, what a beautiful explanation we saw about installing the valve and guide for the head✋
Ssalam alikom 🎉
Do you have tractors for sale?
Greetings i am a tractor mechanic and i am pakistani