@@samisivonen direct translation is: Very beautifully filmed. Idea. And beauty. The unity of supertechnology and nature is already perfect. Thanks for the beauty
I just bought two G2 200 H.O. motors. I've had them for 8 months... LOVE THEM! I don't even know where to start on why... The Company backs their product. At low idle they sound like diesels.
How are they going now still got them ? Considering one instead of a merc Optimax on my 17 foot ski boat , do you recommend them still ? Merc guys swear merc and g2 is problems ? I love the reviews they seem to have lightning acceleration , thanks for the comment !
As long as you're not allowing the engine to over rev I can't see any harm. Though I'm sure its rather an inefficient way of moving given that like 20% of your thust is just flying into the air. But I guess that is why we have the ol' phrase "Smiles per gallon."
Crimson Pyro you actually gain speed because it raises the boat out of the water and creates less drag. Of course there is a limit where you can go too much, the boat will porpoise and over rev and u will feel the loss of power
A bit late to the party, but I'm pretty sure Matthew meant the part of the video where the boat is pretty much standing still and the motor is raised almost all the way out of the water and they're just spraying water with the prop.
Its perfectly ok to do that with the motor especially the G2, he was demonstrating the low water pick up on the nose cone on the lower unit. The G2 comes factory with high speed water pick up..
The Vindicator bad ass venom bad ass fast strike and intruder all bad ass OMC outboards I have no clue on quality control at BRP. You might have a damn fine Etec. There were a bunch of bad injectors and balancing them I heard was a bitch
They run nice so does a cheap Korean car! From ficht on they were mechanically behind in tech just adding more and more complex engine management but with expensive parts and bad reliability means they never were relied upon by coastguard or police or even surf life saving
I see more mercurys and yamahas with blown power heads for sale than anything else and none of these g2 ,s fir sale at all never seen one with a blown powerhead yet
@@atvdave88 I agree with you there they are well engineered and I don’t mind the engines at all especially in larger hp,my experience as a marine mechanic is limited but still learning just would prefer to work on Yamaha and tohatsu and mercury if i have to,and if it’s paying well I’ll fix brp
Evinrude was big for European and Australians got evinrudes that are 30 years old still run out 30 miles offshore I had Suzuki blow up on me and Yamaha just quit running but not an evinrude yet
as an ex marine mechanic I’m biased towards the best engines to work on and in service need the least parts! btw I still use my 60s sports twin to power a home made hydroplane, but brp,evinrude,Johnson,mer cruiser and stern drives,some mercury,Suzuki,Honda some Yamaha and most 4 stroke’s all trash! I build my own surface drive outboards now and won’t look back!
I called it the year they came out. They re-invented the wheel and nobody wants it and nobody will want it and they will be out of business in less than a decade man. It sucks being right all the time.
i am an outboard mechanic, and i have an e-tec myself. the electronics are almost just as bad. it's cheap plastic that breaks easily and lots of exposed copper that corrodes
Why do we lose our minds with unreal motors. Love it!
I have a 90 hp etec and absolutely love it. Its super quiet at idle and fuel milage is amazing.
Show parabens! Muito legal em ver um dos melhores motor do mundo em ação!!! 🇧🇷
Best 300 out there right now, and man that motor is mounted perfectly!
Stumbled on this, awesome video man, really captured the feel of the moment, RIP Evinrude!
Fantasic watercooling intake, can run the engine all way up in trim , and wonderful sound , have a 150 g2, great motor ..
What about spare Parts?
@@janb572 no problem in at least 9 years, and it will be parts in more years for sure.
I could get a G2 300 hp with 120h 2016 Build.
Thinking about that
Очень красиво снято.
Идея. И красота. Единение супертехники и а природа уже идеальна. Спасибо за Красоту..
Олег Балуков , don’t understand, sorry.
@@samisivonen direct translation is: Very beautifully filmed.
Idea. And beauty. The unity of supertechnology and nature is already perfect. Thanks for the beauty
nice sound. sounds like a solid engine congratulations
checking back in after 3 years - still a nice video - midwinter here now so waiting very much for spring/summer to arrive
Thanks! Extremely cold weather entering into whole Finland for first weeks of 2024, good time to plan trips for next summer…
@@samisivonen boat on the water in 4 weeks - looking forward to it - have a great summer
Just love the sound and torque of a 2 stroke
I just bought two G2 200 H.O. motors. I've had them for 8 months... LOVE THEM! I don't even know where to start on why... The Company backs their product. At low idle they sound like diesels.
Could be because diesels idle low but idk
How are they going now still got them ? Considering one instead of a merc Optimax on my 17 foot ski boat , do you recommend them still ? Merc guys swear merc and g2 is problems ? I love the reviews they seem to have lightning acceleration , thanks for the comment !
Just checking in 6 years later to see how well this video aged..
;-) nice. Boat and motor also doing great.
@@samisivonenall etec engines are 2 strokes?
@@alvarogvdltgarcia52 Yes, all Evinrude ETEC engines are 2-stroke outboard engines.
Офигеть!!! 💪😎👍
Have same motor. Waiting for summer!
oh there were a nice sunset wow
Evinrude outboard motor is the best in the world... 💖
They are actually trash
Ya, so good they went out of business. By the way I own one!
@@lklk1997 yeah same lol
Is doing a rooster tail like that bad for the motor?? Always wondered so I'd never done it
Motor is perfectly positioned & adjusted by owner Harri Husso, who is outboard specialist.
As long as you're not allowing the engine to over rev I can't see any harm. Though I'm sure its rather an inefficient way of moving given that like 20% of your thust is just flying into the air. But I guess that is why we have the ol' phrase "Smiles per gallon."
Crimson Pyro you actually gain speed because it raises the boat out of the water and creates less drag. Of course there is a limit where you can go too much, the boat will porpoise and over rev and u will feel the loss of power
A bit late to the party, but I'm pretty sure Matthew meant the part of the video where the boat is pretty much standing still and the motor is raised almost all the way out of the water and they're just spraying water with the prop.
Its perfectly ok to do that with the motor especially the G2, he was demonstrating the low water pick up on the nose cone on the lower unit. The G2 comes factory with high speed water pick up..
Ive just picked up a 300hp Enirude, but some people are telling me they are no good????
Own a 2018 300G2 1000+hrs encounting no problems yet. Warranty still good through local shop if problems should start to occur. So ur good bud
Joliiiiiiie 😎👍🏝️
The Vindicator bad ass venom bad ass fast strike and intruder all bad ass OMC outboards I have no clue on quality control at BRP. You might have a damn fine Etec. There were a bunch of bad injectors and balancing them I heard was a bitch
Nice 💯
Thats a sick motor!
😍😍😍😍
TOP
top!!!
I'm sure it's at the bottom of the lake by now.
Noup, working very well
Looking for a 90 hp Evinrude
i love 2t
А как можно заказать такой мотор
Potrei conoscere il peso e le dimensioni di questa barca il mio 300 cv è montato dietro una mimi 7,80 ft potrebbe andare bene
www.beneteau.com/flyer-2004-2016/flyer-750-open
You can see boat a bit more detailed in following video: th-cam.com/video/QfbKbwEXOjA/w-d-xo.html
RIP Evinrude
They run nice so does a cheap Korean car! From ficht on they were mechanically behind in tech just adding more and more complex engine management but with expensive parts and bad reliability means they never were relied upon by coastguard or police or even surf life saving
I see more mercurys and yamahas with blown power heads for sale than anything else and none of these g2 ,s fir sale at all never seen one with a blown powerhead yet
@@atvdave88 I agree with you there they are well engineered and I don’t mind the engines at all especially in larger hp,my experience as a marine mechanic is limited but still learning just would prefer to work on Yamaha and tohatsu and mercury if i have to,and if it’s paying well I’ll fix brp
Evinrude was big for European and Australians got evinrudes that are 30 years old still run out 30 miles offshore I had Suzuki blow up on me and Yamaha just quit running but not an evinrude yet
as an ex marine mechanic I’m biased towards the best engines to work on and in service need the least parts! btw I still use my 60s sports twin to power a home made hydroplane, but brp,evinrude,Johnson,mer cruiser and stern drives,some mercury,Suzuki,Honda some Yamaha and most 4 stroke’s all trash! I build my own surface drive outboards now and won’t look back!
I called it the year they came out. They re-invented the wheel and nobody wants it and nobody will want it and they will be out of business in less than a decade man. It sucks being right all the time.
Sounds quite like a 4 stroke why??Where's that loud sound from a V6??
Hope G2 have better Electronics then the Ficht...
i am an outboard mechanic, and i have an e-tec myself. the electronics are almost just as bad. it's cheap plastic that breaks easily and lots of exposed copper that corrodes
The Norwegian when you install the evinrude g2 do you need to do any programming with a computer after you install it?
@@The.Norwegian A regular spray with WD40 etc will keep them good......
Top speed?
45 knots
👍
The best money can by
Kiva fendari.
Gonna need a new impeller after that 😂
No, large water inlet in front of lower unit so he scooped more than enough coolant
Yamaha any day
Dddiiooo magro
Unfortunately, gone forever…
?
@@samisivonen evinrude stopped producing outboards
There back under rotax yes that stupid ass half outboard half I/O it’s here stupid idea
Too bad the Canadians ruined Evinrude
Probably at the bottom of a scrap pile now and replaced with a yamaha.
Noup
Hi guys peace be with you
Invitation too Islam
Please except invitation