iPhone 13PM CPU Swap - How to Recover Data from a Severely Bent iPhone
ฝัง
- เผยแพร่เมื่อ 7 พ.ย. 2022
- In this video, watch as we tackle an iPhone 13 Pro Max with a severe bend and cracked motherboard. We'll take you through the entire CPU transfer process, including:
1️⃣ Preparing the donor board by pulling chips and cleaning pads.
2️⃣ Removing the CPU, NAND, and EEPROM from the damaged iPhone.
3️⃣ Reballing the chips for proper alignment and connectivity.
4️⃣ Placing the chips on the donor board to complete the process.
During this procedure, we encountered an issue with the PMIC, which we replaced to ensure a successful recovery. In hindsight, it might not have been necessary, but it's always better to be thorough!
We know these CPU swap videos might seem a bit technical, and we usually focus on diagnostics, but we wanted to showcase the intricate work that goes into iPhone data recovery.
If you're in need of iPhone Data Recovery services, fill out the intake form here: www.iboardrepair.com/
Feel free to like, comment, and subscribe for more iPhone repair and data recovery content. Let us know if you'd like to see more videos like this or if you have any suggestions for future topics.
Thank you for watching! - วิทยาศาสตร์และเทคโนโลยี
I appreciate that you’ve documented this process along with the issues that you ran into and overcame. Keep at it with the CPU swap videos.
Thanks for watching!
Great work bro ❤
Thanks!
Big thanks for the upload and efforts.
Thanks for watching!
@@iBoardRepair what temps u used to pickup sotter 350celcius?
Don't feel sad about the low views, keep uploading.
You are best sir
I appreciate that hard I work I know this is sooo difficult
Thank you!
@@iBoardRepair sir 🫶🏻
Mad skills I must admit. Bravo. I was curious if you can replace the CPU with a different one. So an actual CPU swap per say.
I don't know, possibly. That would not work for data recovery, but maybe with a restore. I dont really consider cpu swaps to be a reliable repair, so I only do them for data recovery purposes.
Temperature and Air flow, please mention at top right side of the screen
If you don’t mind me asking my friend how were you l able to have the video footage through the microscope? Great video thank you for the help!
Just a microscope cam, they are available lots of places. I think I got mine from Injured Gadgets website.
Assalamualaikum..sir,,
How much temperature and air you raise the CPU.
Sorry for my many questions. Can you make a list of the different power rails
You will just have to look at schematics or boardviews, that is the easiest way. No problem about the many questions!
Nice 👍👍👍
Thank you! Cheers!
You made mention of a solder wick that you like. What product is that? What is the neat solder wick to use?
I like "goot wick"
temp to remove cpu ?
Bro, for Ip Xs Max, is it possible for data recovery? As it was stucked in Apple b&w logo. Most of the pics and videos are in the phone's memory as the icloud was the free 5gb version.
what kind of your microskop sir..?
Hey Aaron, can you please list a chips needed to boot only? You mention that soo many times but i like to know wich exactly is needed. Thanks
It is a little different for each model, but in general you need the the pmic, charging ics, image and touch ics, boost ic (or short boost to main), and sometimes some audio ics. It is really a lot less then people think.
He wrote this in a different video.
I am your Big Fan
you are best
Thanks for the support!
Hello when clean the underfill on the swap board. When you support the soldering iron with your hot gun. Do you take out the air? Or what air setting do you use? Do you work with a preheater for it
I don't use a preheater, I just use 220c on the hot air to assist the iron.
Hi Aaron, after swap is this model go to dfu and require an update?
no, not normally
do you now if i cn swapp the logic eeprom on an 13 pro max the eeprom is damaged but im not 100% sure if thats the reason the phone is bootlooping and the apple stays only 3 seconds i testet a icloud board without logic eeprom ans its behavior is the same can i safe the phone with another eeprom i think i heard that the logic eeprom on i think 11 and above arent swappable but im not sure thanks vor help :D
I dont think it will work but I have never tried! It would need a full restore if it has any chance.
@Repair yeah on the old ones it works with a new logic eeprom and restore but only until xs series i think but i dont 100% know and maybe someone of you had tryed it x3
Which programmer u use for logic bord data
recovery ?
I didn't use any programmer
@@iBoardRepair like iPhone XS 11 need program then swap the board up 12 don’t need you mean ?
What temperature did you use to clean the CPU?
I think I use 200c or so.
mister what schematic can I see power scuence iphone 13, I have problem😢 dead iphone 13, upnormal amper
use zxw tools
Which solder do you use for cleaning cpu undefiled
Low melt, 148c
@@iBoardRepair Thx master
Controlla i dettagli
125 / 5.000
Risultati della traduzione
Risultato di traduzione
You have ruined an interesting video. With constant and fast moves of the motherboard under the microscope. Bad video.
Free video. Don't watch it if you don't like it.
Hey hi , my iphone11 has storage full issue and keeps reboot looping is there any possiblity to recover data like changing the underboard and fix the storage issue ? Re3py asap im worried bro
Hello, sure I can take a look. Fill out the intake form at my website: www.iboardrepair.com
@@iBoardRepair can the data be recoverd bro iam from india ??
@@deepakkumar.420 I don't know until I work on it.
Please provide your contact