Check out www.Laptwo.com for motorcycle, ATV, scooter and dirt bike parts! HUGE selection of parts! My Instagram: 2_vintage_ Please SUBSCRIBE and LIKE the video if you enjoyed! It helps me out a lot!
TheNow454 im asking for a second opinion. I have a 2003 rm85 that's never been rebuilt. Should I rebuild it and get new reeds? It runs good but bogs a little below the power band. Could be a carb issue for I just got the bike and rode it. I didnt really check anything but make sure the mix is right. 32:1
PS: the guy riding the cr85 is trashing the engine. Don't use engine braking on a 2t and change gears more often. The sound that bike makes when you ride it almost made me cry.
a rich pilot jet would probably be a good idea if you plan on engine braking but to be fair he never leaned out the main jet so really he could thrash his bike the whole day without breaking it, ironically if he ran it slowly he would break his bike snce the pilot is what he leaned, not the main
jamison alexander they should let them idle for a good 2-3 minutes until around 100 degrees and then slowly take off, not run the shit out of it right out the gate with no time to idle
HazX honestly fuck ktm you twelvie fuck face stick to minecraft if you’re gonna throw shit on Yamaha’s or Honda’s I bet a pw50 would thrash your piece of shit ktm which stands for keeps taking money because they break all the time🖕🏼and don’t hate on @sonsywhale
You dunno what your doing with the carb so leave it alone before you blow it up set it to the stock settings put the jet that came with the fmf pipe in it and leave it alone. Before you blow it up. It's to lean and running out of gas at wide open learn your ish before you blow it up and d*mn bro warm it first. Idle till warm good thing Daddy has money to fix your f-ups
CR85 jetting and maybe pipe needs the carbon burned out. I have a 99 CR125 that bogged just like that with the FMF SST pipe and I burned the carbon and jetted the bike to what FMF said with the needle clip 2nd position from top. Fixed everything. Spark plug is light brown and bike is very powerful. Just search FMF Jetting Center and it will show up then give it the bikes information. It's very helpful.
You make it lean, then frash the fuck out of it then wonder why it's running like that? I used to like watching your videos but lately it's painful and not enjoyable hearing your bikes running lean and you just frashing them when those bikes aren't meant to be at full speed like that. You don't lean an engine out for speed or high revs or power, you make them richer it's basic engine knowledge dude. Lean = more heat = melted engine.
Race the yz250 and cr250, the bogging could be the jetting, mixture, spark plug, or reeds my Blaster did the same exact thing and it was the reeds it was hard to start at times and just bogged out when it hit the powerband I changed the reeds and it runs great now
if they actually knew how to keep their bikes up in the power band. that 85 should have actually stayed right on his ass given granted it needs Reed's but still letting off the throttle to much and using the clutch
2vintage did I not say that given granted they were bad? I could tell they were bad when you took off on it, I was talking about staying up in the power band the whole time dropping throttle like that and clutching brings a 2 stroke back down in power band so when you grab the next gear it's gotta work back up to the top.
the Cr 85 is running like that because it does not have the correct spark plug! It either needs a hotter one or colder one. The exact problem was on my bike. Cuz as soon as it wants to hit the power band it want more spark and your spark plug can't create enough.
The bikes not doing something weird you just don’t know how to ride the whole race I was screaming shift shift 😂 he gone learn when he send the rod through the block
Check out www.Laptwo.com for motorcycle, ATV, scooter and dirt bike parts! HUGE selection of parts!
My Instagram: 2_vintage_
Please SUBSCRIBE and LIKE the video if you enjoyed! It helps me out a lot!
The guy on the Honda was shifting way way way late ever gear.
Dude!!! Hold he clutch in when more when ur not on the throttle! That engine breaking sound is killing me, u don't ride a 2 stroke like that 😩
He's probably always complaining about his chains stretching when the camera is off lol
TheNow454 yep dude he's gonna blow it up.
TheNow454 exactly
TheNow454 im asking for a second opinion. I have a 2003 rm85 that's never been rebuilt. Should I rebuild it and get new reeds? It runs good but bogs a little below the power band. Could be a carb issue for I just got the bike and rode it. I didnt really check anything but make sure the mix is right. 32:1
DctheGr8 _ best way to check if you need a new top end is to use a compression tester
PS: the guy riding the cr85 is trashing the engine. Don't use engine braking on a 2t and change gears more often. The sound that bike makes when you ride it almost made me cry.
surg23 i got so mad bro
a rich pilot jet would probably be a good idea if you plan on engine braking but to be fair he never leaned out the main jet so really he could thrash his bike the whole day without breaking it, ironically if he ran it slowly he would break his bike snce the pilot is what he leaned, not the main
His name is joe idiot
Sleepy Gamer and not a single fuck was given
Danger Zone 😂😅
“I’m in third gear” slams thru every gear
I feel like every one of your bikes barely work
He doesn’t take care of them
Most are pretty dialed......
Yea I’ve been watching all these races and nearly every video there’s something wrong with bike
Tanner Pritchett stop the hate
Yeah stop the hate
he's saying that he was in third gear but he was in 6th
Did you ever think that when you leaned out the carb it might have messed it up
big hoss your right
Typical Addiction see they don't understand that so they go and sell the bike😂😂
big hoss I agree he needs that carb sorting out it sounds lke the floats to me but I'm no expert
Byson Byson yeah
He only leaned the pilot jet so its not really a big deal, should only be an issue when the bike is under low throttle or idle
It always bothers me how you guys never let your bikes warm up the right way
batman I’m sayin
They do
Kind of
jamison alexander they should let them idle for a good 2-3 minutes until around 100 degrees and then slowly take off, not run the shit out of it right out the gate with no time to idle
batman that’s so true tbh
Every time he lose he say something happened
Smoked 😂 I really love 2 vintage but he hates on kx way to much and it’s a really good brand 🙏🏼
Learn to ride 2 strokes pls... Dont engine break with 2 stroke bikes
ITS A FUCKING HONDA
@ Oh yeah and yamaha is shit, if anything ktm is the good.
HazX honestly fuck ktm you twelvie fuck face stick to minecraft if you’re gonna throw shit on Yamaha’s or Honda’s I bet a pw50 would thrash your piece of shit ktm which stands for keeps taking money because they break all the time🖕🏼and don’t hate on @sonsywhale
SonsyWhale yz peace of shit
SonsyWhale Yamaha= 🤢🤢🤮🤮
I was in 3rd gear shifts like 8 times my bike is bogging
Parker Lefevre you mean 7 😂
IKR
Love how close y’all are as brothers👊
"This feels lose like the steering" "Its okay" *smiles*
Definitely gonna toast the engine with his super delayed shifting.
Just been reading the comments. Isn't it nice to see your fan club is out in force giving you heaps of 'advice' and 'support'.... :p
That CR85 has issues far more serious than poor fuel mixture. He probably needs a top end rebuild and a new carb.
I was Rollin when we said "oh it sounds fast"😂😂😂😂😂😂
“gonna warm her up a lil bit”
proceeds to ride around house 95% of the time in powerband for 20 seconds
Sounds like new rings honestly, makes me want to die with that sound.
"It sounds fast" - 2vintage 2017
Maxman 1008 hahaha ye just cringy 😅
So does my weed wacker
STOP ENGINE BREAKING
Just got a 2003 Honda Cr85 big wheel because my mom had it for a lil while, super pumped about it
You dunno what your doing with the carb so leave it alone before you blow it up set it to the stock settings put the jet that came with the fmf pipe in it and leave it alone. Before you blow it up. It's to lean and running out of gas at wide open learn your ish before you blow it up and d*mn bro warm it first. Idle till warm good thing Daddy has money to fix your f-ups
Love the channel, living the good life in Wisconsin
I had the same problem on my yz85. When u adjusted the fuel air mixture into the carb it messed up the jetting
If 2 vintage pins this he reads the comments
Ricky’s Channel yeah Boi I read all comments!
2vintage how
I see you comenting on high gear mx channel
Ricky’s Channemjmuh
rrd
4:15 plz change gear man its killing me
Same bro
pure excuses when you're losing 😂
CR85 jetting and maybe pipe needs the carbon burned out. I have a 99 CR125 that bogged just like that with the FMF SST pipe and I burned the carbon and jetted the bike to what FMF said with the needle clip 2nd position from top. Fixed everything. Spark plug is light brown and bike is very powerful. Just search FMF Jetting Center and it will show up then give it the bikes information. It's very helpful.
2003 CR85 (From FMF themselves)
Main jet: 125
Pilot Jet: 52
Needle: Stock
Needle Clip Position: 3rd (From top)
Air screw: 1.5 out
You make it lean, then frash the fuck out of it then wonder why it's running like that? I used to like watching your videos but lately it's painful and not enjoyable hearing your bikes running lean and you just frashing them when those bikes aren't meant to be at full speed like that.
You don't lean an engine out for speed or high revs or power, you make them richer it's basic engine knowledge dude. Lean = more heat = melted engine.
RustySkull Productions 2 strokes actually have more power when leaned out but you risk engine damage from overheating like you said
RustySkull Productions exactly
Straight facts night gone blow that shit up
Yeeere
“Acting a little bit goofy” I don’t even ride a 2t but you are KILLING the engine barely holding that clutch and shifting late
really should warm it up man like idle for a few mins
New sub😂 I can't stop watching your vids!
Air screw is idle adjustment. Lean or rich would be determined by jetting. needle clip position, main jet. Plug chop.
thanks I just learned to never touch that screw=screw up, lose race, etc
Race the yz250 and cr250, the bogging could be the jetting, mixture, spark plug, or reeds my Blaster did the same exact thing and it was the reeds it was hard to start at times and just bogged out when it hit the powerband I changed the reeds and it runs great now
Will570 yeah I'm buying new reeds
Will570 is right your carb is either clogged or the jetting is wrong
AnthonyMBossick it's a cr85
Will570 the yz 250 would smoke a cr 250
You should ride at a motorcross track
i cant believe ive been subbed since u had 8k subs now ur at 23 nice
Cr85 vs rm85 would be a good race
CALLUM CC year i Think too
I thought they sold the rm long time ago?
No that was the rm125
CALLUM CC Oh
I've raced a cr 85 with my rm 85 and the rm won
"It sounds fast" -2vintage 1992-2017
U can’t shift💀😂
Why does the heavier rider ride the slower bike
IKR
Tyr turnage no it’s not a kx 100 would beat it all day
Cr 85 would destroy that 100 anyday I had a mint kx100 and the cr 85 destroyed it
Awesome vid and edits and filming and bikes and vehicles and shop
Nice vid, 2vintage
Ree
kkkk!!Kokomo
It never bogged out
How you gonna play with the idol when he bike isn’t started?
nice vid mand keep it up
really good video
It's bogging cuz its starving for fuel. And warm up your fuckin bikes.
I wish I had a backyard like that 😂
I like how this guy a races a slow bike against a fast bike but it’s still cool watching
I love the channel guys :D
I fell bad for that cr 85. Rust in peace!
Love the vids keep them up
LOOL "i was like 3rd gear" *is pinned in 6th*
if they actually knew how to keep their bikes up in the power band. that 85 should have actually stayed right on his ass given granted it needs Reed's but still letting off the throttle to much and using the clutch
Brenden Price Umm the reeds were junk lol. You can't keep up with a KX100 with reeds that don't work.
2vintage did I not say that given granted they were bad? I could tell they were bad when you took off on it, I was talking about staying up in the power band the whole time dropping throttle like that and clutching brings a 2 stroke back down in power band so when you grab the next gear it's gotta work back up to the top.
Brenden Price yep
sounds like you got it to leaned out n.clutches slipping
“I was only going third gear” (Clearly in 6th)
How tall is the kid riding the KX? My girl is 5'5?
the Cr 85 is running like that because it does not have the correct spark plug! It either needs a hotter one or colder one. The exact problem was on my bike. Cuz as soon as it wants to hit the power band it want more spark and your spark plug can't create enough.
“I was in 3rd gear” (in 6th gear)
I love watching your racing vids
In what state was this video recorded??
out of the 2 which ones better the FMF or Pro Circut exuast...?
The 85cc has 23 to 24hp.
The 100cc has about 27-28hp.
yes been waiting for this!!!
Is your carburetor clean?
What happened to Luke's MGB? Did he sell it?
Hi i just found the cr85 on Craigslist and am looking at it but is it fixed or does it still bog down?
So what was the problem reed valves?!
if 2vintige pins this he reads comments
cinamizer maxima e
🍦🏍
your video is boring. 😤😤😤
cinamizer maxima so do you watch quad ricers
I like your video but u got to stop complaining an making excuses
This video is the epitome of having all the gear, and no idea 😂
water in your carb or not enough spark in your plug
I love your kx 100 I also ride a 2016 kx 100 there beasts
Stephen M they're*
ExoTic MaGz def YZ
how much did you buy those bikes for?
Did you turn the choke off
Can u link where you got them graphics on the kx 100
Lear to actually fix a bike not just make it look better
Does he know your supposed to pull in the clutch when you coast
Happy that he’s gotten better riding 2 strokes ‘a little’, how stupid can u be to say it’s bogging when ur holding the throttle WIDE OPEN in 2th gear!
How stupid can u be to say 2th instead of 2nd😂😂
Jaydon Crowe how stupid can u be to care?
You have to get the rpms up right before you shift
Is the cr a small wheel or bike wheel
My 04 cr 85 did the same thang I put reeds and top end and got new jets and still did it
Nice vid
what size sprocket was on the kx 100
Doing 40-70 with no gear on? Mannn.... I'll send flowers!
4:01 that is hard to listen to 😂
Does that mean u have to shift up?
Oof that engine braking hurts so much
Could a 2 stoke cr85 beat a 4 stroke crf110
What does that screw adjust? I know it's somthing with air fuel but what exactly
Air to gas mixture screw makes more or less gas or air into the carburetor
"only one race so we dont break the bikes" holy fuck are they really that bad taken care of? Lmfao
He sounds like he's around 16-18 riding a cr 85 you need an upgrade my man
I need your help! I bought a Honda cr85 big wheel and it doesn't have a kill switch so how do you turn the engine off?
TilloHD stall it in first gear (just release the clutch without gas) until you have the time to get a kill switch added.
Can you do a kx 100 vs 125 video?
Could you do KX 100 vs Rm 125
It’s doing something weird alright, it’s called getting gaped 🤣👊🏼
Is the cr85 a 2003?
This kid has more excuses than subscribers
christian Lemonade ahaha
christian Lemonade he got on my nerves so bad I'd slap em
christian Lemonade 😱🏁🐢👏did u see the turtle pass him
I know
So anoying
The bikes not doing something weird you just don’t know how to ride the whole race I was screaming shift shift 😂 he gone learn when he send the rod through the block