1x30 Grinder modifications that make a real difference!!
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- This is my primary grinder for knives. I will be getting a 2x72 shortly, but this has been an awesome unit. However right out of the box there can be some improvements to optimize for knife making. This is only one way of modifying this grinder, but doing modifications was very cheap, and let me take my work to a new level. I highly encourage anyone who uses this grinder to modify it a little bit to suit your needs
This was a great video. I've had the HF 1x30 for a couple years and I'd venture to guess I have close to 1000 hours on it. It's starting to make some weird noises in the motor so I'm assuming it'll die in the not-too-distant future. Even with that being said, I want to make these mods to make my life easier. Thanks a lot. Subbed.
i always free hand so i never have the jig issue, but freehand brings up 100 more for every one it solves. Also my plate screw seized so i unscrewed it and threw the plate across the shop... i later picked it up and threw it away.
Get some light brother, can’t see anything. Good tips tho!
Might have been a great video but lighting was terrible and could not see all mods.
DOBT FORGET TO LOOSEN THE TENSIONER BOLT!! WhEel on the back is supposed to freely move back and forth on the casting. These come from the factory over tightened so it does not move
Bear River Knives, great video! It would be cool to see a video of you making a knife start to finish. New sub!
I got the same belt sander but I took the tool rest off and I build a wood table in front of it then I bought a angle adjustable jig so I didn't have to adjust any of the angles on the sander
Nice vid man. I have the same grinder and getting even plunge lines and bevels is a bitch. Gonna start overhauling my grinder a.s.a.p.
Thanks for your nice video it was educational to me .. I bought a WEN 1 x 30 I was told that it was a better machine so I did it looks ok .Never made a knife in my life but I will like to make me one so very new at it ha ha ..I dont know what sizes belts I need from the beginning to the end to make a knife I would really appreciate if you could tell me .thank you much.. Subbed
I wonder if a speed controller would be beneficial? They make some cheap ones that you plug the tool into.
Thank for the video, get a light ;)
I just used a smaller piece of angle iron for my jig and didn’t have to change the platen. I also just epoxied my work rest to the old one so I didn’t have to drill anything. Has worked great. Put some flitz polish on the work rest so the jig glides nicely
GUY FROM TEXAS SELL A ANGLE GUIDE FOR KNIFES LOT CHEAPER AND EASIER THAN WHAT YOU DID...................
Good ideas and great video!
I too have had the same problems and am in the process of doing the same as you! THANKS!
The lighting is fine if you can see when you work...
Great video. What are the dimensions of the tool rest, platen and jig you made?
Harbor freight router speed control
Just found this. Thanks for the info. I hope things are going well. And your still making
Yes I am! I had to close shop for a time, but I’m back at it! Hoping to make some new videos in the near future
it would be good if you showed how you use it
I USE A SPEED CONTROLLER
Good video, nice mods
Thanks man
No problem!
I had to do something similar to mine. I've decided to build a 2" because the grinders available are way over priced for what you actually get.
I finished my 2x72 grinder build earlier this summer! best choice I've made for my knife making
P.S. AND I AM NOT SURE WHAT YOU DID BEING YOU CAN NOT EXPLAIN IT............ BUT NEVER MIND TO MUCH WORK FOR ME...........
Wow. A lot of work for a solution that is already designed. I bought a Harbor Freight belt sander and ordered a simple add-on jig that attaches to the platen and it is adjustable for all knife angles. Problem solved.
Hello KD can i have a link to the add-on you are referring to ?
I'd also like a link if you don't mind