Mini Bike Restoration : Part 2 Wheel Bearings, Tubeless Tires, Brake & Sprocket
ฝัง
- เผยแพร่เมื่อ 18 พ.ย. 2017
- In Part 2 we install new wheel bearings, show you how to inflate a tubeless tire, install sprocket, rear brake disc and prep for paint!
Support my channel when you shop Amazon!
Tools I use
Festool Track saw : amzn.to/2vhncAA
Festool Domino : amzn.to/2wseq1n
Festool CT36 : amzn.to/2vhMKOg
Festool Orbital Sander : amzn.to/2hIpeFa
Festool Rotex : amzn.to/2vhKAOp
Rigid Table Saw : amzn.to/2vhnXJW
Rigid Spindle Sander : amzn.to/2wsb6Dl
Rigid 14 gallon Vac : amzn.to/2vi82Lx
Dewalt Planer : amzn.to/2vDyekG
Dewalt Compact Router : amzn.to/2vktLkv
Bosch Router : amzn.to/2vhH06Z
Bosch Right Angle Driver : amzn.to/2vhhqiw
Bosch Mini Driver : amzn.to/2vkJXCk
Bosch Jigsaw : amzn.to/2wslRWm
Milwaukee Drill Combo : amzn.to/2vhRnrH
Milwaukee 6.5" Circular Saw : amzn.to/2vhNhj2
Kreg K4 Pocket Hole Jig : amzn.to/2ws3qAY
Kreg Mobile Project Center : amzn.to/2vhNOBK
Micro Jig Pushblock : amzn.to/2frCbm3
Rikon Lathe : amzn.to/2uEIVim
Woodriver Turning Tools : amzn.to/2vhO2Zy
Rockler Carbine Pen Turning Set : amzn.to/2hIWGLF
Incra Box Joint Jig : amzn.to/2hHZFEq
Woodpeckers Drill Press Table : amzn.to/2ws0p3D
Rockler Taper/Straight Line Jig : amzn.to/2vhinr6
Stanley Low Angle Jack Plane : amzn.to/2vkNpg7
Delta Dust Collector : amzn.to/2hILUp5
Be Sure to Follow Me!
TH-cam / johnnysshop
FaceBook / realjohnnysshop
Twitter / realjohnnysshop
Instagram / johnnysshop
Website johnnysshop.net/ - แนวปฏิบัติและการใช้ชีวิต
![[ไฮไลต์] เจ้าฟ่าง ธีรพงศ์ ศิลาชัย "คว้าเหรียญเงิน" ยกน้ำหนักชาย รุ่น 61kg | โอลิมปิก 2024](http://i.ytimg.com/vi/981lYv1AwKk/mqdefault.jpg)
Really helpful thanks
Another great video.
Thank you, this helped a lot
Very helpful, thank you
Thanks for watching!
Awesome video and channel as always !!!!
Thank you!
Where can I find a wheel with a brake disc on it
nice video where did you buy the wheel bearing at and what size are the bearing.
Great video. Thanks. How much room do I need to leave between the frame tabs to hold a rear wheel assembly like yours with sprocket and disk.
How do you put air in that back tire after you installed the sprocket?
Could you post the wheel size, tire size/ make. thanks
My real axle came off my wheel on my Baja db30. The chain just spins but it’s not longer connected to the actual wheel to move
Will a bearing seize up nd lock the back wheel up?
What size is the back sprocket I can't seem to find one or the size to it on the mini bike we got the teeth are all wore out so if you could let me know what size I need to find be nice thank you
Thanks! This helped alot. I started restoring a old mini bike and couldnt figure out the barings.
What’s that he sprays in the tire
what carb cleaner did you use
Were did you get the tire at?
What wheels are Those and what tires did you use
While you had the wheels down that far why didn't you paint them
The year on the bike is between 2004-2011 my bikes an 08 it should say it on the shroud on the old engine but it's seen better days in your situation so it might of gotta sun baked and pealed off
What size disc brake is that?
A heat gun or even a hair blow dryer will loosen the adhesives and you can peel those stickers off in seconds. :)
what screws did you use to install the sprocket and brake disk?
did you find out??
What was the stock clutch and chain? I have stock engine but not sure what clutch I have to buy all I know that it’s an 11 tooth
Run 12t in the front and the stock in the rear, I run about 50 on a stock predator 212 with that gearing.
Think u can help with mine
What size bearring??
Where did you get the bearings from?
Amazon
I have run into a sprocket that appears to either be made onto the rim or pressed on to the rim. There are no bolts anywhere on the sprocket, just a bearing in the center. Now, this mini bike id extremely old, I have it when I was about 8 years old, and i will turn 54 here on May 8th 2022. So, it is really old. I am very mechanically inclined and have looked at this sprocket with great detail and can only believe it is pressed on in a way that it appears to be one with the rim. Ever seen anything like that in the mini bike world? I have a few photos but obviously cannot post them here, but would like to get someone's experienced eye on it.
you forgot to show the tire removal and install..........had to take mine to a shop to get'em on!!! however they were easier getting off
Can you say how much this all costs?
I think we ended up around $200 with the motor.
What’s the tire size
I don't recall :(
what kind of wheel is that
Stock. Tires are from Amazon
@@Johnnysshop i think that tire is a 145/70-6 :D
@@TimTuts Yes !!
@@Johnnysshop Where can I find a stock rim?
could you do me a huge favor and measure your rear axel?
Hard part isnt seating the bead its removing the old tire from such a small rim
No actually them tires he's using are pretty easy to get off, I get them off in like 5mins with a long screw driver. It's the small, narrow tires you want to watch out for, they are a pain. Like on snowblowers.
@@cro-thehacker7018 prying on the rim with a screwdriver is the hillbilly way and will bend the rim
@@TheShangralaaaa17 yeah maybe if you don't know how to take a tire off lmao! It should come off with ease with a bit of dawn dish soap. How you bend your rim is forcing it, break the bead, squeeze then angle your rim a bit and use the screwdriver to slip the tire over the lip- sometimes you need another to push the tire out but that's as needed.
@@TheShangralaaaa17 Yeah it might bend it if you're using some piece of shit chinesium harbor frieght rim.
I've never bent a stock rim on a gokart or minibike with a screwdriver. Scratched the paint sure but you ain't bending a good rim with a screwdriver.