Bubbling Boilers is actually a 2016 short film for a 4D Ride at an Amusement Park, it's not part of the BWBA saga. Also, Thomas' siderods are corrected at how they move in Nitrogeon Studios.
Thomas: Sir you came to res... Sir Topham Hatt: SHUT UP! You are a very naughty engine. Thomas: But it wasn't my faul... Sir Topham Hatt: SILENCE! You Miserable engine. We shall leave you hear for always and always and always Thomas: Wait, COME BACK! *DON'T LEAVE MEEEEE!*
Joe, the source that this YTP is using is the 4-D Special Bubbling Boilers. It came around during the production of either Season 19 or 20, so BWBA didn't exist around that time.
Overall, pretty funny YTP! I believe someone suggested you to do this video in the reaction suggestions section in the Discord page. The ending part is pretty dark though because imagine leaving Thomas abandoned in this area, he’ll eventually rust away.
You're correct the side rods even in real life move the same way as the models do. The wheels would jam if they moved parallel to each other in real life. So yes the way the CGI animation animated them was inaccurate. The model's were actually accurate to that of a real steam engine's side rods
I’m afraid this isn’t a BWBA episode. It’s actually a 4D attraction you can watch in certain places in the world. I believe one place in Boston plays it.
Driver3jo how you can tell if it's a big world Big adventure episode is if Thomas is really high pitch and annoying but this is probably the third season into CGI episode
If there are people from Boston viewing this video. Do you think Thomas and Friends: Bubbling Boilers was made specifically for the Museum of Science in Boston?
To back up your issue with the coupling rods moving at the same time. Yes that has always been wrong in the CGI series. Steam engine coupling rods are supposed to be a quarter of a turn to the other so that you never get a dead spot in the cylinders.
Realistically, if one side rod is pointing down, the other must pointing forward, for maximum performance of the steam Pistons to work properly with out any problems. Especially for an E2 engine! So I am not surprise if you annoyed at CGI Thomas Side rods are parallel to each other cuz that’s unrealistic for E2 to have parallel side rods.
Great Job!!! Also Could Mr. Bubbles Be Related To Sir Topham Hatt? Also Me: Thank You Nostalgia Critic For Ending The Video With A Bang!!! Nostalgia Critic: Don't Mention It!!!
Ha that was hilarious with the seagull having James face and with Smudger ha ha ha ha hilarious even the come for the ride error with James saying Oh 🤣🤣🤣🤣🤣🤣🤣🤣😅😅😅😅😅😅😅😂😂😂😂😂😂😂 those parts are the funniest even Salty mocking Cranky was hilarious Salty is my number one favorite engine but the worst part is that new thomas picture i agree with you the new season is stupid Disgraceful, Disgusting, Despicable Me OH THE INDIGNITY
Bubbling Boilers is actually a 2016 short film for a 4D Ride at an Amusement Park, it's not part of the BWBA saga.
Also, Thomas' siderods are corrected at how they move in Nitrogeon Studios.
If one side rod is close to the ground, the other side rod has to be towards the front of the engine or they will jam and not be able to move.
The best part was when Harold Flew backwards
Where
No 2:33
Can’t get any more British than “Bullocks”
1:46 acting like mr conductor
Bubbling Boilers came out around 2016, so no, it’s not part of the BWBA era.
It came out when the CGI era was at its peak with season 20
Joe you should watch “Duck and Henry shove fish up Gordon’s rear”
I love that one!!!
@@HenrikofEldenbright Same thing, different word.
@@HenrikofEldenbright 🥲☺️. .☺️😆
Give me a link
This is a YTP of the 4D special called "Bubbling Boilers" if you didn't know (my guess this was produced in 2016 during the Brenner Era).
Who was that? Your gf? You need a sign saying “Recording in process, do not disturb”
I had a sign like that. It didn't work.
@@Andrew_I_Exist me as well
And me. Even…..
SOCKS
I Think That’s Her Mom
To answer your question at 3:22, no, it's not a BWBA episode, in fact, this was created 2 years prior to BWBA
I recommend for that for the Christmas season, you watch a YTP of a Christmas Story called "YTP - Chris Mass Store". Also, nice video.
5:59 Welp... I didn't expect nostalgia critic to be here!😂💗
Thomas: Sir you came to res...
Sir Topham Hatt: SHUT UP! You are a very naughty engine.
Thomas: But it wasn't my faul...
Sir Topham Hatt: SILENCE! You Miserable engine. We shall leave you hear for always and always and always
Thomas: Wait, COME BACK! *DON'T LEAVE MEEEEE!*
That's mean of Sir Topham Hatt to say.
3:27 LOOK OUT ITS THE O-FACE ARMY!!!
Thomas was never happy at early learning center
I like how Cranky talks to the seagull at the beginning, something about that is cool to me. Also, SHEESH Thomas, what a rude intro
Joe, the source that this YTP is using is the 4-D Special Bubbling Boilers. It came around during the production of either Season 19 or 20, so BWBA didn't exist around that time.
Actually the side rods being parallel is correct to Thomas´ basis but that doesn´t matter, your not going to read this anyway.
Yeah I noticed that in the model series that the side rods weren't in sync, while they are in the CGI series
2:33 that face 😂😂😂
That intro was the highlight of this entire video XD
2:54 there’s a we’ll be right back joke 🤣🤣🤣🤣
2:30 Easter Egg to day out with Thomas but anyway funny YTP.
Just posted a photo of a new school
1:34 Side rods are always 90 degrees from each other to stabilize the movement.
Overall, pretty funny YTP! I believe someone suggested you to do this video in the reaction suggestions section in the Discord page. The ending part is pretty dark though because imagine leaving Thomas abandoned in this area, he’ll eventually rust away.
When Thomas said F*^K OFF😂😂
1:14 DUUUUUUDE!!! Holy shit I thought I was the only one lol
3:20 it was a 4D thomas special that i think streamed in Thomas Land Cinema in around 2015.
3:54 is that the faces of hank hill 🤣🤣🤣
Glad to see you enjoyed my YTP
It was awesome.
Smudger laugh always makes me laugh
You're correct the side rods even in real life move the same way as the models do. The wheels would jam if they moved parallel to each other in real life. So yes the way the CGI animation animated them was inaccurate. The model's were actually accurate to that of a real steam engine's side rods
This came out during the Renaissance Era of Thomas. (2016)
We will leave you here for always and always and all the ways
3:24 why do the bubbles have Thomas the tank engines face on them 🤣🤣🤣🤣
3:31 is that wario from super Mario 🤣🤣🤣🤣
I laughed through all the ytp
3:25 to answer your question, this is an exclusive episode called Thomas and friends 4D: Bubbling Boilers. it was made during the Brennor Era
I love your videos Man
2:09 is my favorite part and I don’t know why
(i’d rather not)
3:47 ReviewTechUSA moment
2:30 all i can hear is EH MEH MEH MEH
4:47 I f*cking hate clowns.
Hey wait a minute. Doesn’t Spawn say that to the Joker in Mortal Kombat 11?
The Thumbnail was Salty with Cranky Face!!!
I can see you’re trying to talk to me, but all I can hear is NUNUNUNUNUNUNUNUNUNUNUNUNUNUNUNUNUN...
On 2:32, the seagull sang to the song What Is Love by Haddaway.
Krusty the clown in Thomas 😳
0:09
Subtitles: ahhh yes, *M U S I C*
4:42 hey it’s crusty the clown 🤡🤣🤣🤣🤣
Regarding siderods, you're correct. Real steam engines' siderods don't move parallel to each other.
2:30 Salty: NININININININININ
I’m afraid this isn’t a BWBA episode. It’s actually a 4D attraction you can watch in certain places in the world. I believe one place in Boston plays it.
Poor Thomas A.K.A poor kid
Driver3jo how you can tell if it's a big world Big adventure episode is if Thomas is really high pitch and annoying but this is probably the third season into CGI episode
Boubling Boilers came out in 2015 and its a little ridiculous but its amazing!
Betcha Ray Mak ain't watchin this
If there are people from Boston viewing this video. Do you think Thomas and Friends: Bubbling Boilers was made specifically for the Museum of Science in Boston?
The side rods have to be offset 90 degrees
To back up your issue with the coupling rods moving at the same time. Yes that has always been wrong in the CGI series. Steam engine coupling rods are supposed to be a quarter of a turn to the other so that you never get a dead spot in the cylinders.
Yeah, side rods are offset 25° from each other. It's for balance purposes.
side rods are supposed to be parallel because if an engine stalls on a hill it can start again
This was actually a special 4D episode built for a theme park ride.
Yh the coupling rods moving in parallel bother me too...they should be at 90° to each other
Wasn't expecting a Bubbling boilers ytp
i agree with the side rods
Also this isn’t a BWBA episode it was made before BWBA was even a thing
I have the siderod thing too, I always do it like the model serious on my trackmaster
I have the same issue about the side rods but not due to the model era but since all steam engine side rods are a quarter turn from the oppposit side
Realistically, if one side rod is pointing down, the other must pointing forward, for maximum performance of the steam Pistons to work properly with out any problems. Especially for an E2 engine! So I am not surprise if you annoyed at CGI Thomas Side rods are parallel to each other cuz that’s unrealistic for E2 to have parallel side rods.
Great Job!!! Also Could Mr. Bubbles Be Related To Sir Topham Hatt?
Also Me: Thank You Nostalgia Critic For Ending The Video With A Bang!!!
Nostalgia Critic: Don't Mention It!!!
This is so 😂😂😂😂
*tries to stop laughing hard*
Side rods are not supposed be parallel they are offset
1:08 Yes I totally agree, really unrealistic. But Mattel doesn't care.
Yes that is one of my petpeaves
1:40 i know the coupling rods of thomas is not logique
Hey, Joe! Can u react to Thomas & Friends x Fire In The Spoof - Smoke [Music Video] | GRM Daily?
Ha that was hilarious with the seagull having James face and with Smudger ha ha ha ha hilarious even the come for the ride error with James saying Oh 🤣🤣🤣🤣🤣🤣🤣🤣😅😅😅😅😅😅😅😂😂😂😂😂😂😂 those parts are the funniest even Salty mocking Cranky was hilarious Salty is my number one favorite engine but the worst part is that new thomas picture i agree with you the new season is stupid Disgraceful, Disgusting, Despicable Me OH THE INDIGNITY
You know what i don't like? I don't like the fact the beginning of this could've worked in a movie. I can elaborate
No it's not this is way before Thomas & Friends Big Adventures⁉️
Siderods do not move like that on real locomotives. The model era had it correct
5:40 😂
Dude I love the new Thomas he's cuter
When seeing all engines go.
Me/Thomas: bruh
4:30
0:10 is that your mom or your gf?
Who’s in your house? I’m curious now.
it bothers me too bout the siderods
wheres little thomas still in therapy
Believe it or not, that is not a bwba related episode, it's not that new either
0:09 be a little quieter!
3:44
Can I ask will you react to the Unlucky tug
My mom when: 2:10
What song is this 2:37
Suggestion: React to The Real Xbox Nerd’s YTP Don’t Call Me Dirty Percy
0:00 XD
Tomtom
0:09-0:11 Who was that?
Hehehehehe
Know this is funny
Get reboot thomas out of my face