Thank you very very much.. Merging the T04 files solved all my problems, cos I keep getting an extra default point appearing not far from my GNSS Base .. Cheers Robert
Robert, about this segmenting. I think we started to notice this roughly 2 years ago. R10-2. We also have R12i now. Recently got burned by this segmenting issue. Currently have 2022 June (or so) firmware on everything. Usually R10-2 is a base since dont have a lot of 12. Anyhow ... does anyone know why this segmenting happens and if there is a fix to stop it? I am now investigating it. We use DJI L1 on M300, if the base does not log (a pause) then during that window of no base logging it is impossible to get lidar data. The lidar REQUIRES base data. When this hole in data happens with using P1 camera, it is not as bad as I can fall back on rtk values (which continue to happen when logging pauses). So this is serious issue for me. Segmenting seems to random happen, also not just when doing drone work. Other survey work as well. We log at 5 secs always, and 0.2 sec when doing drone missions. We do a LOT of static, and static during rtk. In Alaska.
My understanding is it’s a known bug and there is a fix coming in the next firmware release. Apparently the receiver crashes and restarts is what causes it.
I have same segment of static file issue. Has that ever been fixed? By way, for drone you most definitely should log at 0.2sec, not 1 sec. I ppk drones in TBC a lot. I just use survey app, no photogrammetry app.
Nice video Robert. Handy to know for Trimble Static Files. Ive done it with Rinex with Splicing/Merging using other software when needed. We got lucky and the software we use to Post Process our DJI M300 allows multiple Base Rinex files to be imported and merges it automatically - saved a heap of messing around on our end.
MANNN this has been whooping my butt with Lidar PPK processing for the better part of a year. I've been having to work around the wonky file segmentation with flight planning until now... this is GREAT!
Robert one question I used r10 static rtk base one time when I sent to opus the sent me the correct value but when I check with VRS it’s different value
Ive always just converted them to Rinex format and open then with notepad and edit them as needed. Most of the time its because i ended up going past 12am UTC time and i need to process then with opus so i will trim all the sv log entries that are after 12am UTC, otherwise id have to wait an extra day before i can process with opus.
Thank you very very much.. Merging the T04 files solved all my problems, cos I keep getting an extra default point appearing not far from my GNSS Base .. Cheers Robert
Love, love, love when one of my videos helps! Thank you!
Robert, about this segmenting. I think we started to notice this roughly 2 years ago. R10-2. We also have R12i now. Recently got burned by this segmenting issue. Currently have 2022 June (or so) firmware on everything. Usually R10-2 is a base since dont have a lot of 12. Anyhow ... does anyone know why this segmenting happens and if there is a fix to stop it? I am now investigating it. We use DJI L1 on M300, if the base does not log (a pause) then during that window of no base logging it is impossible to get lidar data. The lidar REQUIRES base data. When this hole in data happens with using P1 camera, it is not as bad as I can fall back on rtk values (which continue to happen when logging pauses). So this is serious issue for me. Segmenting seems to random happen, also not just when doing drone work. Other survey work as well. We log at 5 secs always, and 0.2 sec when doing drone missions. We do a LOT of static, and static during rtk. In Alaska.
My understanding is it’s a known bug and there is a fix coming in the next firmware release. Apparently the receiver crashes and restarts is what causes it.
Could i get the link to the PDF ?
Hi , can I measure 2 static points on one T02 file. Thanks
Not exactly sure your question but one static file per point. A T02 per point. Does that help?
@@SurveyingWithRobert thanks I got it👍
@@SurveyingWithRobert If I do one static file for 2 points the file will be expire or I can use it for at least for one of them?
I have same segment of static file issue. Has that ever been fixed? By way, for drone you most definitely should log at 0.2sec, not 1 sec. I ppk drones in TBC a lot. I just use survey app, no photogrammetry app.
Drone manufacturers recommend 1 sec PPK. May depend on drone.
Nice video Robert. Handy to know for Trimble Static Files. Ive done it with Rinex with Splicing/Merging using other software when needed. We got lucky and the software we use to Post Process our DJI M300 allows multiple Base Rinex files to be imported and merges it automatically - saved a heap of messing around on our end.
Was that LP360 software?
Yeah thats it.
Super glad you posted this. I was dealing with this a month ago and gave up.
MANNN this has been whooping my butt with Lidar PPK processing for the better part of a year. I've been having to work around the wonky file segmentation with flight planning until now... this is GREAT!
My man Will hooked you up with an Infinity hat?! Lookin good!
Robert one question I used r10 static rtk base one time when I sent to opus the sent me the correct value but when I check with VRS it’s different value
I would have to see the datum’s. How much was the difference?
About 5 feet south
Where I found and downloaded the lasted datum’s and geoid s
Can you do this for multiple days?
They would have to be continuous
@Surveying With Robert figured. Thank you, sir.
I think we are going to implement this into our workflow! Thanks again Robert!!🤘🤘🤙🤙
Ive always just converted them to Rinex format and open then with notepad and edit them as needed.
Most of the time its because i ended up going past 12am UTC time and i need to process then with opus so i will trim all the sv log entries that are after 12am UTC, otherwise id have to wait an extra day before i can process with opus.
I'm thinking that the Access style you should be using in the field is RTK W/DATALOG instead of INFILL
Not if you might have to switch to PPK
@Surveying With Robert do you do that with a base and drone?
@@christopherl.albers3842 always be prepared. If I needed to do check shots and my radio quit I could process the shots with PPK.
I hear you about that! Wouldn't a data-logged static file work for that, too?
I will try to get a video out soon to show you how it works.
than u for the tip
Hi