Good afternoon. The latest modifications of the "dark wolf" do not have a dynamic brake system. The inner brake shoe does not contain springs. The block is in one position. Thanks to your article, as well as a few other kind people, I also made modifications with the "dark wolf". I cut off the stops, and installed springs, 1.4x2.5 mm, wire section 0.1 mm, magnets, 4x1 mm, were also installed. A complete success, but with such springs the magnet touches the coil a little. I put 4x0.5 and the result is the same as yours. Thank you!
Bagaimana kalau menggunakan Neodyum N52? ukuran 4x1 mm apakah magnet terlalu kuat? saya membaca di artikel anda menggunakan N42 ukuran 4x0,5mm dan 4x1mm apakah masih aman jika mencoba menggunakan magnet n52? 4x1 di tipiskan lagi menjadi 4x0,5mm mohon petunjuknya, saya baru beli DWU sehari yang lalu terimakasih banyak semoga dijawab salam dari Indonesia 🇲🇨
I’ve tried the exact same magnets and method on mine and it touches the spool. With just the original magnets I get backlashes on all casts if I don’t make sure to stop it during cast.
Is this on the newer version of the reel (sold from June 2022 onwards)? If so, the braking system is probably locked out in the fully extended position (and this makes the available space smaller). You might be able to fit one or two of the 0.5-mm thickness magnets in without them rubbing.
Hi Paul. I am trying to get the magnets for my Ultra upgrade. But being in Australia there doesn't seem to have anyway of getting them here. Is there an Ebay Link you could tell me about please. Cheers and great video
Hi - are you certain that you have a "moving" brake shoe version of the reel? Reels sold after early June 2022 will almost certainly be the modified "locked" brake shoe version and will not need additional magnets.
Yes, one goes in the side plate where the brakes are and the other goes on the spool spindle. The process is basically the same as the one I show on Fishing Discoveries for the GH100 reel (the only difference is the bearings for Dark Wolf Ultra are a pair of 834 size bearings). There's a video and also written/illustrated demo on how to change the bearings here: fishingdiscoveries.com/fishband-gh100/
Автор видео вы не правы,нельзя ставить магниты толще чем 0.5 потому что они будут цеплять шпулю когда тормоза буду выставлены в положении ( 5 ).Зачем учить людей если сами не знаете что делаете?Народ используйте магниты только размером 4х0.5.Всем удачи.
Good afternoon. The latest modifications of the "dark wolf" do not have a dynamic brake system. The inner brake shoe does not contain springs. The block is in one position. Thanks to your article, as well as a few other kind people, I also made modifications with the "dark wolf". I cut off the stops, and installed springs, 1.4x2.5 mm, wire section 0.1 mm, magnets, 4x1 mm, were also installed. A complete success, but with such springs the magnet touches the coil a little. I put 4x0.5 and the result is the same as yours. Thank you!
Bagaimana kalau menggunakan Neodyum N52?
ukuran 4x1 mm
apakah magnet terlalu kuat?
saya membaca di artikel anda menggunakan N42 ukuran 4x0,5mm dan 4x1mm
apakah masih aman jika mencoba menggunakan magnet n52?
4x1 di tipiskan lagi menjadi 4x0,5mm
mohon petunjuknya, saya baru beli DWU sehari yang lalu
terimakasih banyak semoga dijawab
salam dari Indonesia 🇲🇨
Where can i get the 4mmx0.5 magnets , can only find the 4mmx1mm
up
I’ve tried the exact same magnets and method on mine and it touches the spool. With just the original magnets I get backlashes on all casts if I don’t make sure to stop it during cast.
Is this on the newer version of the reel (sold from June 2022 onwards)? If so, the braking system is probably locked out in the fully extended position (and this makes the available space smaller). You might be able to fit one or two of the 0.5-mm thickness magnets in without them rubbing.
Hi Paul. I am trying to get the magnets for my Ultra upgrade. But being in Australia there doesn't seem to have anyway of getting them here. Is there an Ebay Link you could tell me about please. Cheers and great video
Hi - are you certain that you have a "moving" brake shoe version of the reel? Reels sold after early June 2022 will almost certainly be the modified "locked" brake shoe version and will not need additional magnets.
When it comes to the roro bearing upgrade where do you put those two bearings? I assume they are the ones the spool is using?
Yes, one goes in the side plate where the brakes are and the other goes on the spool spindle. The process is basically the same as the one I show on Fishing Discoveries for the GH100 reel (the only difference is the bearings for Dark Wolf Ultra are a pair of 834 size bearings). There's a video and also written/illustrated demo on how to change the bearings here: fishingdiscoveries.com/fishband-gh100/
Mate there's a Japanese guy that make this same mod about a year ago
Автор видео вы не правы,нельзя ставить магниты толще чем 0.5 потому что они будут цеплять шпулю когда тормоза буду выставлены в положении ( 5 ).Зачем учить людей если сами не знаете что делаете?Народ используйте магниты только размером 4х0.5.Всем удачи.
🎉 𝓅𝓇𝑜𝓂𝑜𝓈𝓂