How to install MK2 GOLF headliner

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ต.ค. 2024

ความคิดเห็น • 12

  • @downnoutmotors
    @downnoutmotors  7 หลายเดือนก่อน

    Mk2 Golf GTI complete replacement roof liner.
    ebay.us/Twl2Th Ebay
    Trimfix fabric adhesive/glue
    ebay.us/SkSLPj Ebay

  • @WinterVR6
    @WinterVR6 7 หลายเดือนก่อน +1

    If I can sell my S5 I’d definitely be interested in your mk2!! Looks soo good on the borbet A’s 👌🏼

    • @downnoutmotors
      @downnoutmotors  7 หลายเดือนก่อน

      Replied to you on Instagram mate 👍

  • @davidfox4213
    @davidfox4213 7 หลายเดือนก่อน +1

    Just so you are aware the link for the headliner is for a MK1 brake conversion 😂 good video though 👍👍

    • @downnoutmotors
      @downnoutmotors  7 หลายเดือนก่อน

      I'm not sure how that's happened 🤔 thank you for letting me now ill update it as soon as I can.

    • @downnoutmotors
      @downnoutmotors  7 หลายเดือนก่อน

      All sort now and thank you again 🙏🏻

  • @Aircooledflat4bug
    @Aircooledflat4bug 5 หลายเดือนก่อน +1

    Nice job. Need to do this myself. A few questions. How long does it take to do, roughly? Did you remove the speaker shelves? Did you remove the sunroof or just leave it slid back? When you refit the winder handle afterwards, do you have to adjust the sunroof mechanism itself to ensure it shuts properly/evenly, or does it line up itself just fine? TIA

    • @downnoutmotors
      @downnoutmotors  5 หลายเดือนก่อน +1

      Hi mate thanks 😊
      For me it took 3 days totalling about 7 hours but I had to stop start with the weather so didn't help.
      I didn't remove the speaker shelf on mine just undone the rear quarter panels and was enough to slide it out.
      The sunroof stayed on the car you just remove the interior panel that connected to the sunroof itself. Wide the sunroof back.. pull the panel down a bit to unclipped it at the front the push it back into the cavity of the roof. It's a bit fiddly but take your time and it will come out.
      The sunroof handle has to be reattached but I closed the sunroof and then screwed in the handle afterwards. Hope this helps mate. Allow plenty of time but not to hard a job.

    • @Aircooledflat4bug
      @Aircooledflat4bug 5 หลายเดือนก่อน +1

      @@downnoutmotors Thanks that’s very helpful. Last question, I promise. I take it you cut the hole for the sunroof with a bit of a lip left. Undo the screws for the sunroof mechanism, and tuck the material between the mechanism and the roof, then refit the screws? You didn’t cover that bit. TIA

    • @downnoutmotors
      @downnoutmotors  5 หลายเดือนก่อน

      @Aircooledflat4bug yep leave about half inch to fold over. Use adhesive spray to hold it in then fit the sunroof interior trim to help hold it in place

    • @Goopsta
      @Goopsta หลายเดือนก่อน +1

      @@downnoutmotors sorry to hijack, to be clear, take interior trim/seal off on sunroof, cut back masterial, stick on with adhesive then trim goes back on right? :)

    • @downnoutmotors
      @downnoutmotors  หลายเดือนก่อน +1

      @Goopsta yes that correct.. dont cut the sunroof excess fabric back to far. Leave a good inch. When removing the sunroof seal be careful not to Bend or kink it unless you have a new one to fit.