Thanks for the video. I bought my first set in December. HO AFX years ago. One of the first things I did was to add the boarders. Putting the Carrera guardrails on the very outside. That gets rid of unfair advantage by riding the guardrail. I am upgrading my controllers to Truespeed ones. I liked those the best for use and price. Magnets are all going to be gone soon. Make the car work on the track not the track for the car(within reason) Still working out the tires I want to use. I will probably stay rubber. I have more non Carrera cars than Carrera. Chipping them with the Slottechnik chip allows for better placement of the infrared light than is on the Carrera chip. 12.5mm to the right of the guide. Drift affects the lane switching much less and I am finding I don’t require the straight before the changer. I am working on converting my Carrera chips to this configuration. Eventually I will post a video on this after doing an array of different cars.
Thank you for watching. Once the new layout is sorted out I will start working on my carrera cars a few at a time. SlotR did a good video recently his IROC one is worth a watch and something I am going to use as a baseline set up.
@@johncahill3644 I'll have to look into making them. I have been slowly switching to Paul guage as that's what we run at the shop. They do work better on the carrera track than stock tires for sure.
Nice video. I'm also not long in the hobby and have made the same decision as you.. Truspeed controller An Axel Box Borders around the track. Great advice to every beginner In my opinion, the borders add a lot to racing.
I am new to the digital Carrea world as well. Moved from HO. I fully agree on X-over's. I want the hairpin. But same issue there. Sooner or later someone is going to de-slot and or crash. Also agreed on the better controller! Waiting on my shoulders to round my track out. Drifting is fun! good video, race on!
Excellent video! I love all of the Carrera products, and those borders are fantastic. I keep saying I'll pick up one of the digital/analog boxes, and going to have to do so. Is it just me, but I feel very intimidated by that hook sticking out in front of the crossover- be careful, Lol!
Lol. Yeah no accidents just yet and shorts pockets still intact. A better solution is needed longterm though. I love being able to drive the other manufacturers cars. At 40 bucks per digital conversion/chip the cost of the box pays for itself pretty quickly.
Thanks for the info. I haven’t really nailed down what I want to do there. The 1 wooden track I visit only allows foam tires or rubber. I haven’t decided on whether to add the analog option to my track. I have a few cars for the wooden track and I have been chipping the other cars for home.
I have a afx set that I got from my wife for a Xmas gift and I have not been able to find the room for it yet but I definitely will find some where to set it up 😎👍❤️
Hey Jonniehobby! Thanks for watching man picked up many tips from your channel! The local club runs 1/24 Hardbody Nascar so I am putting one together. Just got the body painted and now for the waterside decals. The H&R chassis with foam tires runs well can't wait to finish up the body and have the whole car going around. I'll have to post a video when done!
Thank you. It really is a great product solid and pro level. Being able to switch between any cars I like so easily really let's me make the most of the hobby! The Borders are a big help a few weeks in now, and agame changer for 124 scale cars and keeping 132 cars in better shape!
Get rid of the guardrails and add shoulders. Adds so much more to racing. Takes away the advantage of the outside lane. Add the catch fence to prevent cars flying off!!
Thanks for the video. I don't think I will ever do a layout with plastic track rather spend the money for a custom wood layout. I know the cost is high but it's not like I am without talent.... the cars slapping the sections drives me crazy. The inner and outer lane issue is also solved but not de slotting. That has been part of slot car racing since it's inception.
Thanks for watching. There are Pros and cons with both. Plastic is great for temporary set up and playing with layouts. Not to mention easy for digital and racing more than 2 cars. Wood is not really suitable for temporary set up, difficult to implement digital lane changers can not adjust layouts. Each have their place I feel.
Hi, are you running at full speed yet? The 1/32 comes with lower power 'high speed' and the 1/24 converts the track to 'full-speed' running at 18v, really interested as the scalextric track doesn't seem to have moved on since the 70's and has probs got worse with cheaper plastics and cheaper metal in the rails
@@Dreamcee I run the carrera cars at full speed in stock form. They perform well but thinking of upgrading the tires and pulling out the magnets. The revo slot group b cars I run at power level 6/10 which I guess is about 7 or 8 volts. Works really well for these cars. The cars I race at the shop I run at 8 or 9 out of 10 as the shop I race at race on 11 volts. I like the speed adjustment as all the cars handle differently with different levels of traction and motor power. So it helps to find a nice level. I had scalextric last in 2002. This carrera track is far better quality and to be honest the cars are also better made. It does take up more room than scalextric as corners are a larger radius. But I would get carrera again in a heart beat. Especially if you think you want to try 1:24. I don't have a 124 other than the Nascar H&R kit and that has a 12V motor so I haven't had the need to buy the uprated power supply yet.
Thanks you for watching the Table is 16ft x 5ft. I have the new layout running but need to tidy up the overpass supports as they are just a bunch of boxes lol. I'll try to get a photo of the plan in the next few days posted.
Great stuff mate 👍 the digital to analog box will open up a world of cars to you 🤗have you stated to take the magnets out of the carrera cars yet ? Looking forward to seeing your new track ...Harry
Thanks Harry. Not yet on the magnets. I liked SlotR's IROC procedure so I will likely be doing that once I have the new layout screwed down. One car at a time lol.
@@backthatthingupyoyoy if you are asking about the taller wall. That is 2" vinyl edging stuck on with double sided tape with a layer of red white reflective tape. I am not sure of the number for the official carrera crash barrier.
Yes it is a fun hobby and easy to involve existing friends in. I have also made new friends at the club. I enjoy the light tinkering and collecting of cars.
Thanks for the video. I bought my first set in December. HO AFX years ago. One of the first things I did was to add the boarders. Putting the Carrera guardrails on the very outside. That gets rid of unfair advantage by riding the guardrail. I am upgrading my controllers to Truespeed ones. I liked those the best for use and price. Magnets are all going to be gone soon. Make the car work on the track not the track for the car(within reason) Still working out the tires I want to use. I will probably stay rubber. I have more non Carrera cars than Carrera. Chipping them with the Slottechnik chip allows for better placement of the infrared light than is on the Carrera chip. 12.5mm to the right of the guide. Drift affects the lane switching much less and I am finding I don’t require the straight before the changer. I am working on converting my Carrera chips to this configuration. Eventually I will post a video on this after doing an array of different cars.
Thank you for watching. Once the new layout is sorted out I will start working on my carrera cars a few at a time. SlotR did a good video recently his IROC one is worth a watch and something I am going to use as a baseline set up.
You might want to consider urethane tires if running without magnets. Learn to make your own, it’s pretty easy (and cheaper).
@@johncahill3644 I'll have to look into making them. I have been slowly switching to Paul guage as that's what we run at the shop. They do work better on the carrera track than stock tires for sure.
Nice video.
I'm also not long in the hobby and have made the same decision as you..
Truspeed controller
An Axel Box
Borders around the track.
Great advice to every beginner
In my opinion, the borders add a lot to racing.
Thank you and thanks for watching. Sounds like your set up is similar.
Great video! Looking forward to what's next! 😎
Thank you for watching. Looking forward to the redesign build and getting the cars back on it!
I am new to the digital Carrea world as well. Moved from HO. I fully agree on X-over's. I want the hairpin. But same issue there. Sooner or later someone is going to de-slot and or crash. Also agreed on the better controller! Waiting on my shoulders to round my track out. Drifting is fun!
good video, race on!
Thank you I appreciate it.
Tracks looking good! You’re going to love running the 1:24s. They offer a different driving experience! Cheers
Thank you sir. The H&R 124 Nascar I built runs really well. I would like to get a BRM but can't decide which lol!
Also hope you found some good fish and chips while visiting the UK slot fest!
I like those racing marks on the barriers, makes it look more real and rough.
@@sonykroket yeah. The barriers look good that's actual slot car paint though and now the cars look like they have been racing 🏁
@@simonsays171 It´s the good stuff, run it like there are hellhounds on your trail.
Excellent video! I love all of the Carrera products, and those borders are fantastic. I keep saying I'll pick up one of the digital/analog boxes, and going to have to do so. Is it just me, but I feel very intimidated by that hook sticking out in front of the crossover- be careful, Lol!
Lol. Yeah no accidents just yet and shorts pockets still intact. A better solution is needed longterm though.
I love being able to drive the other manufacturers cars. At 40 bucks per digital conversion/chip the cost of the box pays for itself pretty quickly.
The PMTR4001 barriers are fantastic, recommended if youre thing about 1/24.
@@tonyconroy180 those look awesome. Thanks for that!
Thanks for the info. I haven’t really nailed down what I want to do there. The 1 wooden track I visit only allows foam tires or rubber. I haven’t decided on whether to add the analog option to my track. I have a few cars for the wooden track and I have been chipping the other cars for home.
I have a afx set that I got from my wife for a Xmas gift and I have not been able to find the room for it yet but I definitely will find some where to set it up 😎👍❤️
@@johnfloyd838 I have not tried ho scale. I am interested but at the same time the current track is the only rabbit hole I want to explore.
@@simonsays171 I understand 😎👍, whatever works for you and enjoy the hobby Simon.
You're going to love the 1:24 scale. It's a very different driving experience compared to the 1:32, but a lot of fun.
Hey Jonniehobby! Thanks for watching man picked up many tips from your channel! The local club runs 1/24 Hardbody Nascar so I am putting one together. Just got the body painted and now for the waterside decals. The H&R chassis with foam tires runs well can't wait to finish up the body and have the whole car going around. I'll have to post a video when done!
Great to see you enjoying your OmniSlotBox! Good decision to add shoulders as well!
Thank you. It really is a great product solid and pro level. Being able to switch between any cars I like so easily really let's me make the most of the hobby! The Borders are a big help a few weeks in now, and agame changer for 124 scale cars and keeping 132 cars in better shape!
Get rid of the guardrails and add shoulders. Adds so much more to racing. Takes away the advantage of the outside lane. Add the catch fence to prevent cars flying off!!
Just finished doing that. Just need to re secure the track and I am good to go!
Great video
Thanks for the video. I don't think I will ever do a layout with plastic track rather spend the money for a custom wood layout. I know the cost is high but it's not like I am without talent.... the cars slapping the sections drives me crazy. The inner and outer lane issue is also solved but not de slotting. That has been part of slot car racing since it's inception.
Thanks for watching. There are Pros and cons with both. Plastic is great for temporary set up and playing with layouts. Not to mention easy for digital and racing more than 2 cars. Wood is not really suitable for temporary set up, difficult to implement digital lane changers can not adjust layouts. Each have their place I feel.
Hi, are you running at full speed yet? The 1/32 comes with lower power 'high speed' and the 1/24 converts the track to 'full-speed' running at 18v, really interested as the scalextric track doesn't seem to have moved on since the 70's and has probs got worse with cheaper plastics and cheaper metal in the rails
@@Dreamcee I run the carrera cars at full speed in stock form. They perform well but thinking of upgrading the tires and pulling out the magnets.
The revo slot group b cars I run at power level 6/10 which I guess is about 7 or 8 volts. Works really well for these cars.
The cars I race at the shop I run at 8 or 9 out of 10 as the shop I race at race on 11 volts.
I like the speed adjustment as all the cars handle differently with different levels of traction and motor power. So it helps to find a nice level.
I had scalextric last in 2002. This carrera track is far better quality and to be honest the cars are also better made. It does take up more room than scalextric as corners are a larger radius. But I would get carrera again in a heart beat. Especially if you think you want to try 1:24. I don't have a 124 other than the Nascar H&R kit and that has a 12V motor so I haven't had the need to buy the uprated power supply yet.
Looking forward to seeing your next layout. It would be great if you share your track plan.
How large is your table?
Thanks you for watching the Table is 16ft x 5ft. I have the new layout running but need to tidy up the overpass supports as they are just a bunch of boxes lol. I'll try to get a photo of the plan in the next few days posted.
Great stuff mate 👍 the digital to analog box will open up a world of cars to you 🤗have you stated to take the magnets out of the carrera cars yet ? Looking forward to seeing your new track ...Harry
Thanks Harry. Not yet on the magnets. I liked SlotR's IROC procedure so I will likely be doing that once I have the new layout screwed down. One car at a time lol.
Very good.
Do YOU have a Carrera PART NUMBER for the border walls?
@@backthatthingupyoyoy if you are asking about the taller wall. That is 2" vinyl edging stuck on with double sided tape with a layer of red white reflective tape.
I am not sure of the number for the official carrera crash barrier.
Are you glad you took the plunge? As I am considering it as well.
Yes it is a fun hobby and easy to involve existing friends in. I have also made new friends at the club. I enjoy the light tinkering and collecting of cars.
@@simonsays171 Thank you for the reply, I appreciate your feedback. Enjoy. Mark
I like it
How big is that green table?
There are 2 8ft x 5ft tables end to end for a total of 16ft x 5 ft