hi. there is a lot of video for led tester in tube , this is the best and the only one which is safe. the only problem I have, my multimeter is very old and 3 holes in row. so the space between the holes are short and i can't put that AC plug into it. i should do some cheating. and also I'll use 18650 battery since i don't have mobile phone battery. thank you for sharing. and you work very clean and nice 👍
Thank you for the kind words, I'm glad you liked it.🙂🤝 I saw them doing it directly from the mains which is very dangerous. So I decided to do it this way.
В этом корпусе ещё достаточно места для мини-вольтметра. Не обязательно втыкать в тестер. В принципе, тоже вариант, хотя и не самый рациональный. В любом случае - молодец!
Does this device that you developed seem very useful for using the Kelvin method to find shorted components on the board? Is the component that has the lowest voltage on the multimeter probably the one with the short circuit? Am I right?
Gran video amigo, tengo todos los materiales para hacerlo, solo modificaré la entrada al tester, lo otro necesario sería subir el croquis del circuito, saludos desde Valparaíso, Chile.
Okay, the power plug is European. I've always wondered about the history of why Europe uses a 220 vac. Here in the U.S. I've got a similar question about our 120-240 vac system.
I look forward to your next video when your wife or daughter charges their phone with this beautiful charger. For security reasons, I recommend storing in a safe. Otherwise it's nice.
@user-ck3ke3eo2r Especially with zener diodes, the measurement is correct, but with LEDs, it measures the minimum voltage for lighting, which is enough to know the approximate operating voltage. But this is also the case with professional meters. For example, this multimeter that I use has this function up to 10V, but even with it it shows low voltage at the LEDs
hi.
there is a lot of video for led tester in tube , this is the best and the only one which is safe.
the only problem I have, my multimeter is very old and 3 holes in row. so the space between the holes are short and i can't put that AC plug into it. i should do some cheating. and also I'll use 18650 battery since i don't have mobile phone battery.
thank you for sharing.
and you work very clean and nice 👍
Thank you for the kind words, I'm glad you liked it.🙂🤝
I saw them doing it directly from the mains which is very dangerous.
So I decided to do it this way.
@@ErCanEverything ❤️
В этом корпусе ещё достаточно места для мини-вольтметра. Не обязательно втыкать в тестер. В принципе, тоже вариант, хотя и не самый рациональный. В любом случае - молодец!
Super interesting. It will be very useful for DIY projects!
It turned out very compact and I like it a lot.
Thank you my Friend🙂🤝
Universal tester! 👏
Awesome work!
These types of hacks are very useful.
Thank you Brother🙏🙂🤝
Excellent bro
Thank you Bro🙂🤝
good job... but then what is in the display when volts go above 40 ... example, when testing led strip with more number of leds?
Does this device that you developed seem very useful for using the Kelvin method to find shorted components on the board? Is the component that has the lowest voltage on the multimeter probably the one with the short circuit? Am I right?
Gran video amigo, tengo todos los materiales para hacerlo, solo modificaré la entrada al tester, lo otro necesario sería subir el croquis del circuito, saludos desde Valparaíso, Chile.
Que buen video.
Cual es la referencia del modulo elevador?
Dios lo bendiga
Thank you my Friend🙂🤝
God bless you❤️
All the necessary things are in the description of the video.
Nice work.
Güzel bir çalışma 👍
Teşekkür ederim🙂🤝
Super...
Feery good 👍👍👍👍
Ercan süpersin.👍👍👍
Teşekkür ederim🙏🙂
This best shock proof and risk proof idea keep it up bro I am subscribing you
Cool idea! I'll try it.
What's up with the batteries at the end?
Nothing, I just measured them although they can be measured without this device🤷♂️🙂
Okay, the power plug is European. I've always wondered about the history of why Europe uses a 220 vac. Here in the U.S. I've got a similar question about our 120-240 vac system.
www.alliedcomponents.com/blog/60-hz-ac-why-is-it-the-us-standard
Гениально!!!
The parkside iron turns every flux into vapour in seconds while killing the tips good iron tbh👍
So you haven't watched this video😉
th-cam.com/video/h-0Fjcl83Zs/w-d-xo.html
Yep .... Ya know if you hold the button till it flashes green you can adjust the temperature a bit lol
HOLA MUY BUENO EL VIDEO DE QUE VALOR ES LA RESISTENCIA
SALUDOS DE JUAN DESDE ARGENTINA CUIDATE HERMANO
No viste el vídeo, cuan instala la resistencia sale su valor escrito.
I think instead of battery in put we can give direct 5 volt from charger to boost module if we are using this gadget few times only
It will work anyway
I look forward to your next video when your wife or daughter charges their phone with this beautiful charger. For security reasons, I recommend storing in a safe. Otherwise it's nice.
What do you think about the led tester that I have published on my channel.
Çok iyi olmuş ellerine sağlık.
Ancak yüksek gerilimden dolayı kutuplara dokunursanız biraz titreşim hissedebilirsiniz🙂🤝
@@ErCanEverything haklısınız Her iki uca da aynı anda dokunmamak lazım.
Ótimo , tenho algo assim que fornece 295 voltes DC.
Does the measurement answer exactly, please reply, or does it answer approximately?
It measures accurately, but everything depends on the resistor that determines the current.
@ErCanEverything Ok, I do everything like you. Do I have the exact measurements for the zener diode and the LEDs?
@user-ck3ke3eo2r Especially with zener diodes, the measurement is correct, but with LEDs, it measures the minimum voltage for lighting, which is enough to know the approximate operating voltage. But this is also the case with professional meters. For example, this multimeter that I use has this function up to 10V, but even with it it shows low voltage at the LEDs
Süper👍👍👍👏👏👏
🙂❤️❤️❤️
👍👍👍
👍👌
💕👍
maşallah
Kardeşim başlıkları içerikleri Türkçe destek versen de biz yeni başlayanlara da yardımcı olsan güzel olmaz mı.
Thek hoba na shob ed nahe Jala ga
сверлить пластик - варварство. есть же паяльник - ни шума ни пыли
Yeh just toxic smoke and damaged iron 😂😂😂
But you carry on bruv 😂