Moon: *struggling to pull neck peg out* Me: Use your teeth Moon: "Imma use my teeth" Me: AY YO I actually said this aloud and my siblings looked at me as if I was going crazy
The Miku 2.0 figmas have notoriously weak neck joints and a really weird one too. So i wouldn't be surprised if this was the exact one that broke for OP.
Thanks Moon! my Mikuru committed suicide and jump off my drawing table breaking her neck. thanks to some necromancing she wasn't allowed to die, and now thanks to you i can Frankenstine her. the broken peg is small so it was an issue.
DON'T use your teeth, unless you have titanium ones Or give no fuck about their health Moon is either extremely lucky or extremely good to the point of legendary Most of us aren't I broke off a bit of one of my front cutters while literally doing the same thing - pulling a peg out of a figma joint It was fucking painful and so fucking expensive to get fixed at the dentists
Очень странно, что я свои зубы не поломал, когда отрывал друг от друга детальки лего. Или это у меня зубы такие крепкие. С учетом того, какие детали я увидел тут, то они из мягкого или твердого пластика. Пытаясь их оторвать, зубы не сломать, если детали не из какого либо металла, либо, в случае неудачи при извлечении, сильно щелкать зубами. А так да, если есть альтернатива зубам, то лучше использовать мультитул или плоскогубцы
@@nickhunter2247 пластик в фигмовских пегах очень вязкий, в нем застревают зубы Плюс разделение лего-блоков это параллельное зубам приложение силы, а выдергивание пегов - перпендикулярное И структура зубов такова что они предназначены для выдерживания больших нагрузок в первом случае ценой слабости во втором
skill issue, drink more milk and brush properly lol. jk jk, my dentist told me I got lots of calcium and will likely not have this kind of issue. hope your toofers are doin fine now.
@@KarcharodonAstra never had any issue with teeth before that moment (19 years) or after, was always told by my dentist that I can snap copper cables but it would be better if I didn't And here we are The point remains - teeth are not pliers regardless of skill (nice metaphor, I guess)
Moon making sacrifices to show us plebs how to fix our toys the way god intended, while using our teeth and maybe drilling into our fingers, but god be damned if this isn't the right way
Imagining Moon's dentist sees this vid and just notes down another charge for their next checkup. "So...I see you used your teeth at least 8 times during this video...well we found some chipping and that's going to cost you."
Moon, ffs, please acquire some pliers. As someone who is currently waiting on a new crown for a chipped tooth, I'm asking you, warning you. I broke my tooth on something stupid as a freak accident and now I'm down almost 2 grand. Spend a couple bucks on some cheap pliers.
Having also had to get a crown for a chipped tooth, I endorse this. Pick up a nice pair of pliers, even an expensive set is way cheaper than dental work
Honestly modeling glue might of worked. Technically fuses plastic back together again. I learned that it dissolves plastic when I used too much on a Fw190D plane I was building. the Fuselage was warped, so I used 'extra' glue, and some rubber bands to hold it together since it wanted to split open otherwise at the tail end. Well.... lets say.... it looked like part of Clay Face's body when I woke up the following morning.
These days? I make new toys out of bits of old toys. I also find that the best tool for this job (though the gentle heating of the plastic helps) is a pin-vice., AKA a hand-drill. You just need a small bit to do the job.
Thank you for the tips! Would have loved to see if joint were rebondable, not just for joint fixes but also for repairing broken accessories. Some of the barrels/scopes or other gun parts of 1/12 accessories (eg Little Armory) are so easy to break and my super glue/modeling glue applications always seems so sloppy.
Use a modelling cement like Mr Hobby Cement SP or Tamiya Extra Thin Quick Dry for the Little Armory guns, those are more like model kits than figure accessories.
If you have access to a pin vise (they seem to be easier to find now) you can also drill out the snapped-off joint by drilling the center of it and then pulling it out with a dental tool (or push pin). You *can* try to repair the joint using something like piano wire but beware that it's not really going to weight or movement, there's enough aftermarket joints now though that it shouldn't be a problem (except if you have a Kyon figma and the plastic in the wrists is breaking...).
This is a really good tips do to fixing the figma figure that has a broken joint, its very helpful too. But me however.. Do opposite. I do have a broken figure, and yes. Doing fixing as like new again, but i doing with modifications using a different joint, which is im kinda felt dumb for to be honest.. On the end of my result.. Is ok, can be move again but good way i guess. But yeah nevermind about what am i saying, im very appreciated of your tips tutorial to fixing figma figure, its really excellent work, and its really had a hard time for that. thanks for your hardwork, MOONSHINE ANIMATIONS.. You are the best.🎉✨
I had a similar situation to my Drossel figma. Her shoulder was apparently known to be pretty weak, and when I checked mine, it's basically just waiting to snap at any moment. What I did to fix it was drilling the broken peg out, then I bought a Kotobukiya joint set. It fits pretty perfectly, and much sturdier as well if you know how Kotobukiya kits are.
I love your workshop It is the MAD FIGURINIST WORKSHOP, HELL YEAH!! And I fkin love it's not just me who would use my teef instead of tools if the situatuon was inprompt
Your alien queen story reminds me of when I got a Voltron toy I got for Christmas that was produced before I was even born (parents scoured everywhere to find one for the price of affordable since I was a huge fan of the original voltron) the day of opening him the right arm of the black lion shattered, I'm still having a hard time finding a replacement black lion to this day
I bought a Fantasy Girls F.O.X Long Range Striker Unit earlier this month and immediately broke the ball on her neck joint by accident. I think I spent almost an hour trying to get the broken ball out of the socket with a hot needle. Good thing the model kit had another neck joint or I would have been screwed lmao. 😂
I had a figma horse a few years agothat decided it wanted to jump off my shelf and fly, spoiler alert it didn't. Its neck and back hip broke. i was able to fix it luckily
I do not own any figmas but I did experience a broken peg via gundam rx-78 entry grade. Plan to fix it soon but this video will be useful for the time I buy those kinds of figures
Ngl, i was so into this moon-fix-it segment, for a guy like me who's barely just starting to custom figs (yes, even bootleg ones) it's always with broken stuff. Thank you moon for giving us thy wisdom 😗😬😗🤣
Having collected a lot of these, luckily haven't had too many severe breaks. The flush breaks are the absolute worst though this was a really good tutorial for removing them without having too damage the hole or surrounding area itself. One of the more common breaks I've encountered though are the extensions of Figma stands snapping off overtime because of the tight fit. Not an issue with most, some are obnoxiously snug and prone to breakage. Also though most Figmas now come with an extra hand joint I feel they should also come with an extra neck joint as I've had to replace several over the years.
Honest guides: "this is an easy fix: ..." * struggles * Normal guides: * cuts the struggles out * also honest guides: "your teeth are way more useful than your parents want to admit"
Wow I finally tried this technique as it was recommended by so many others , only to ruin my figure. I'm not mad at you, but rather just, overall disappointed that this happened.
Im going to have to make that custom figure now after watching this legend. Demonstrate how to properly use teeth for deconstruction work... also sword has arrived at border. So yay! Going to butcher i mean.. use an old seras victoria figure i have mostly the hair. Thoguh i may try and make a casting....
I remember when I first discovered figma when I was 13. I was a big fan of Black Rock Shooter and I found someone selling BRS and Strength for $30 bucks each and I begged my dad to get them for me for X-mas. He did but since this was my first experience with buying figma on ebay, we didn't know people sold cheap knockoffs. Needless to say; Strength's robot hands were so loose you couldn't pose them, her arms snapped at the shoulders, and the ponytail joints for BRS snapped as well. My plan was to remove the joints and just glue it back together. I was so arrogant and stupid that I used a drill and exacto knife to try and remove the peg from the arm only to destroy the arm, and tried to force the ball peg in the torso out only to make it snap further. If that didn't prove my stupidity enough, I tried supergluing the peg and joint back together only to wonder why the joint no longer moved. I made similar mistakes with figma so on learning very little from my mistakes until I saw Moon's Goofy Joker behind the scene video where he showed using a heat gun to easily remove the broken joints and swap them out. By then I had many figure i had never touched in fear of braking them. I felt so stupid to had not figured it out even though I used thermoplastics for cosplay pieces. Moon is a man of simple solutions with household tools and spare parts. I can still feel is handprint on my cheek, slapping sense into me. Still; thanks for all you do Moon. P.S. I'm happy to see my custom skelly boy in the background during the heat gun even though no one will know or give a fuck. XD
I experienced broken pegs recently with my rg unicorn fa with one of the ankles and hip joints. Also Much earlier with moon gundam but that was due to my own stupidity. Lesson is check assembly and never paint the insides of joints.
Thank you So Muchhhhhhhhhh! it worked on my Hatsune Miku Symphony Bootleg Figureeee 🥺 all I can afford for now is Bootleg but still its pretty Thank you So nuch!
What an informative video! I do have a question semi-related to it: How do you have so many Figma and figma related parts? I ask because they are usually very expensive or hard to find. I would love to have some that I could customize (make my own OC Waifu lol) so if there is a possibility of finding them more affordable I’m all for it. Even knock-offs seem to be kinda expensive and I got one as my first Nendroid years ago. Anyway sorry for the long message and as always keep up the great work!😃
What about hand pegs. Apparently Guts sword was much to big to be called a sword and would constantly fall twisting the wrist joint and one day when putting it back in place the peg broke off.
BRO!!! As fait gas it, that was the same exact figure I had. Thank you for the information my friend.
Ay, nailed it
*has
Moon: *struggling to pull neck peg out*
Me: Use your teeth
Moon: "Imma use my teeth"
Me: AY YO
I actually said this aloud and my siblings looked at me as if I was going crazy
I used to do that all the time with stuck joints, then I chipped a tooth.
Never again lmao
@@Ohmygodiamonfire Oh no 😂
Usually use pliers hey what's more effective
@@Tsuki_or_Yoru I felt like a dumbass when it happened, but at least I got it repaired lmao
I just pour steaming hot water on them, then I use my teeth.
The Miku 2.0 figmas have notoriously weak neck joints and a really weird one too. So i wouldn't be surprised if this was the exact one that broke for OP.
the animations by mantis x would suggest otherwise,real strong neck game there
Ah! So that's why there so cheap!
What about the snow miku and sakura miku that are just recolors of the 2.0 miku? Do they still use that neck joint
The same guy actually did comment on this vid and said it was the exact same figma lmao
Checking the pinned comment says THAT was the figure op accidentally broke.
Thanks Moon! my Mikuru committed suicide and jump off my drawing table breaking her neck. thanks to some necromancing she wasn't allowed to die, and now thanks to you i can Frankenstine her. the broken peg is small so it was an issue.
P.S. i didn't push Mikuru!
Toy Story Mikuru: “Let me die…. 💀”
“NO! HAHAHAHAHAA~!”
@@UGNAvalon either Fujiko tried to snuff her, or maybe Aqua bumped her off with her booty, she's way clumsy, even in Figma mode.
pls tell me why instead of suicide i read sukuru- is mu brain okay?
OH NO NVM I COMBINED MIKURU AND SUICIDE
DON'T use your teeth, unless you have titanium ones
Or give no fuck about their health
Moon is either extremely lucky or extremely good to the point of legendary
Most of us aren't
I broke off a bit of one of my front cutters while literally doing the same thing - pulling a peg out of a figma joint
It was fucking painful and so fucking expensive to get fixed at the dentists
I mean....fair. good disclaimer here.
Use pliers~
Очень странно, что я свои зубы не поломал, когда отрывал друг от друга детальки лего. Или это у меня зубы такие крепкие. С учетом того, какие детали я увидел тут, то они из мягкого или твердого пластика. Пытаясь их оторвать, зубы не сломать, если детали не из какого либо металла, либо, в случае неудачи при извлечении, сильно щелкать зубами.
А так да, если есть альтернатива зубам, то лучше использовать мультитул или плоскогубцы
@@nickhunter2247 пластик в фигмовских пегах очень вязкий, в нем застревают зубы
Плюс разделение лего-блоков это параллельное зубам приложение силы, а выдергивание пегов - перпендикулярное
И структура зубов такова что они предназначены для выдерживания больших нагрузок в первом случае ценой слабости во втором
skill issue, drink more milk and brush properly lol. jk jk, my dentist told me I got lots of calcium and will likely not have this kind of issue. hope your toofers are doin fine now.
@@KarcharodonAstra never had any issue with teeth before that moment (19 years) or after, was always told by my dentist that I can snap copper cables but it would be better if I didn't
And here we are
The point remains - teeth are not pliers regardless of skill (nice metaphor, I guess)
Help me Moonshine : Crippling Depression
Moon making sacrifices to show us plebs how to fix our toys the way god intended, while using our teeth and maybe drilling into our fingers, but god be damned if this isn't the right way
Imagining Moon's dentist sees this vid and just notes down another charge for their next checkup.
"So...I see you used your teeth at least 8 times during this video...well we found some chipping and that's going to cost you."
This mad man karate chopped a vocaloid for SCIENCE! Mad props.
@MOONSHINEANIMATIONS...... lol no, not gonna happen Spammy bot
And then he used his teeth, that's commitment XD
Moon: a smart person would drain the water
Critic: a logical person would grab a spoon
Moon: a brave person would grab it by hand
The Teriteri Moon in the thumbnail will haunt me in my dream.
Poor Miku, thanks for the insight.
Moon coming in clutch 😮
Moon, ffs, please acquire some pliers. As someone who is currently waiting on a new crown for a chipped tooth, I'm asking you, warning you. I broke my tooth on something stupid as a freak accident and now I'm down almost 2 grand. Spend a couple bucks on some cheap pliers.
Having also had to get a crown for a chipped tooth, I endorse this. Pick up a nice pair of pliers, even an expensive set is way cheaper than dental work
Honestly modeling glue might of worked. Technically fuses plastic back together again. I learned that it dissolves plastic when I used too much on a Fw190D plane I was building. the Fuselage was warped, so I used 'extra' glue, and some rubber bands to hold it together since it wanted to split open otherwise at the tail end. Well.... lets say.... it looked like part of Clay Face's body when I woke up the following morning.
Poor plane :( how much glue did you use ? XD
Man is it strange that I want story time with moon
Thanks for helping moon I needed this vid
These days? I make new toys out of bits of old toys. I also find that the best tool for this job (though the gentle heating of the plastic helps) is a pin-vice., AKA a hand-drill. You just need a small bit to do the job.
2:30 And this is why you use pliers. You would be amazed at how many kinds of pliers there are even for small/miniature work. Yep, forceps, too
Tamiya makes a decent pair of pliers with plastic jaws for gripping plastic parts.
OMG! THANK YOU! I can now replace all the joints on my Bride Nero! They are all cracked or broken.
Thank you for the tips! Would have loved to see if joint were rebondable, not just for joint fixes but also for repairing broken accessories. Some of the barrels/scopes or other gun parts of 1/12 accessories (eg Little Armory) are so easy to break and my super glue/modeling glue applications always seems so sloppy.
Use a modelling cement like Mr Hobby Cement SP or Tamiya Extra Thin Quick Dry for the Little Armory guns, those are more like model kits than figure accessories.
@@Kelvin_Foo thanks! Will give those a try. Have to work on my application brush hand steadiness.
Me, who knows that Miku 2.0 has a weird neck:
"Don't do it man, you're gonna regret it."
this vid gets a thumbs up for that effective karate chop to Miku's neck
Treat your tools like a friend. Keep 'em by you. Never let 'em and down and always have them by your side. - Mario Mario
LISA music in the background is tempting me to space out and zone to that cowbell solo
That hot water technic , make me panic when moon almost stab his own finger
Had to fix my own BioShock statue.
Didn’t send it back, a TINY bit of super glue and done.
🎩
🐍 no step on Snek! 🇺🇸🇭🇰
Dr. Moon the surgery was a success
This is the first time I've ever seen moon purposefully break a figma also don't they cost almost 100 dollars
He has a Patreon account. I'm sure people are giving him enough for him to sustain.
@@prismstar438 oh ya
If you have access to a pin vise (they seem to be easier to find now) you can also drill out the snapped-off joint by drilling the center of it and then pulling it out with a dental tool (or push pin). You *can* try to repair the joint using something like piano wire but beware that it's not really going to weight or movement, there's enough aftermarket joints now though that it shouldn't be a problem (except if you have a Kyon figma and the plastic in the wrists is breaking...).
I was just thinking of a way to fix my sinon figma, thank you, I'll give this a try
This was insanely helpful. I just recently broke this same figure in this same way.
This is a really good tips do to fixing the figma figure that has a broken joint, its very helpful too.
But me however.. Do opposite. I do have a broken figure, and yes. Doing fixing as like new again, but i doing with modifications using a different joint, which is im kinda felt dumb for to be honest.. On the end of my result.. Is ok, can be move again but good way i guess.
But yeah nevermind about what am i saying, im very appreciated of your tips tutorial to fixing figma figure, its really excellent work, and its really had a hard time for that.
thanks for your hardwork, MOONSHINE ANIMATIONS.. You are the best.🎉✨
I had a similar situation to my Drossel figma. Her shoulder was apparently known to be pretty weak, and when I checked mine, it's basically just waiting to snap at any moment. What I did to fix it was drilling the broken peg out, then I bought a Kotobukiya joint set. It fits pretty perfectly, and much sturdier as well if you know how Kotobukiya kits are.
I love your workshop
It is the MAD FIGURINIST WORKSHOP, HELL YEAH!!
And I fkin love it's not just me who would use my teef instead of tools if the situatuon was inprompt
THIS HAPPENED TO ME LIKE ALMOST 2 years ago? i LOVE that we're all having this miku head joint problem 😭😂😂
Actually I have a question as while how do you fix loose sh figuarts sailor moon leg joint
Moon Is Great
Your alien queen story reminds me of when I got a Voltron toy I got for Christmas that was produced before I was even born (parents scoured everywhere to find one for the price of affordable since I was a huge fan of the original voltron) the day of opening him the right arm of the black lion shattered, I'm still having a hard time finding a replacement black lion to this day
We love you moon !
Thanks moon !
"I glued that birches arm on" - Moon 2022
That defeated yay was funny as hell XD
I hope you do more videos like this!
“Now for the tricky part…. Pliers!”
Replacement joints are available for all of the major maker model kits, no need to cannibalize.
I bought a Fantasy Girls F.O.X Long Range Striker Unit earlier this month and immediately broke the ball on her neck joint by accident. I think I spent almost an hour trying to get the broken ball out of the socket with a hot needle. Good thing the model kit had another neck joint or I would have been screwed lmao. 😂
I had a figma horse a few years agothat decided it wanted to jump off my shelf and fly, spoiler alert it didn't. Its neck and back hip broke. i was able to fix it luckily
I do not own any figmas but I did experience a broken peg via gundam rx-78 entry grade. Plan to fix it soon but this video will be useful for the time I buy those kinds of figures
Watch Hobby Clubhouse's :Fixing Broken Gundam Model Pegs - Hobby Clubhouse | Gunpla Tutorials and Fixes" video.
a glorious help
10:41 scuffing the paint made my body recoil in pain
Granted it's probably harder to be careful when you have to keep everything in clear view in front of a camera
@@YayaFeiLong yeah understandable plus its a minor scuff could just sand it and paint it
"Bu-but Moon, I picked up my Figma from the dumpster and I can't afford to get a push pin!!!"
Reeeeeeee
Ngl, i was so into this moon-fix-it segment, for a guy like me who's barely just starting to custom figs (yes, even bootleg ones) it's always with broken stuff. Thank you moon for giving us thy wisdom 😗😬😗🤣
Wish I saw this sooner. Figma joints are a pain to remove and replace.
the funny bunny in the background, nice
Having collected a lot of these, luckily haven't had too many severe breaks. The flush breaks are the absolute worst though this was a really good tutorial for removing them without having too damage the hole or surrounding area itself. One of the more common breaks I've encountered though are the extensions of Figma stands snapping off overtime because of the tight fit. Not an issue with most, some are obnoxiously snug and prone to breakage. Also though most Figmas now come with an extra hand joint I feel they should also come with an extra neck joint as I've had to replace several over the years.
I misread the title as "Ligma Joint"
Honest guides: "this is an easy fix: ..." * struggles *
Normal guides: * cuts the struggles out *
also honest guides: "your teeth are way more useful than your parents want to admit"
Literally happened to my EREN figure
Alt Title: Moon's Just Built Different
More vids like this would be cool on how to fix shit or workarounds to make a custom figma cooler or something along those lines
Well now we know how to fix broken joints
That room looks like a mad Scientist laboratory
So THATS where the extra parts go!
man I always forget how freaking big Juka is...that's a Toddler sized figure!
I took of the head of my Figma sord art online and it work I don’t know how to until I watched this video
:) Thanks for this.
Feta Juka cosplaying Ichigo.
Not related to anything, but you have great taste in music! Bonus respect for Tooth and Tail OST.
Gotta love that LISA the Painful OST
Wow I finally tried this technique as it was recommended by so many others , only to ruin my figure. I'm not mad at you, but rather just, overall disappointed that this happened.
Im going to have to make that custom figure now after watching this legend. Demonstrate how to properly use teeth for deconstruction work... also sword has arrived at border. So yay! Going to butcher i mean.. use an old seras victoria figure i have mostly the hair. Thoguh i may try and make a casting....
Yes
I remember when I first discovered figma when I was 13. I was a big fan of Black Rock Shooter and I found someone selling BRS and Strength for $30 bucks each and I begged my dad to get them for me for X-mas. He did but since this was my first experience with buying figma on ebay, we didn't know people sold cheap knockoffs. Needless to say; Strength's robot hands were so loose you couldn't pose them, her arms snapped at the shoulders, and the ponytail joints for BRS snapped as well. My plan was to remove the joints and just glue it back together. I was so arrogant and stupid that I used a drill and exacto knife to try and remove the peg from the arm only to destroy the arm, and tried to force the ball peg in the torso out only to make it snap further. If that didn't prove my stupidity enough, I tried supergluing the peg and joint back together only to wonder why the joint no longer moved. I made similar mistakes with figma so on learning very little from my mistakes until I saw Moon's Goofy Joker behind the scene video where he showed using a heat gun to easily remove the broken joints and swap them out. By then I had many figure i had never touched in fear of braking them. I felt so stupid to had not figured it out even though I used thermoplastics for cosplay pieces. Moon is a man of simple solutions with household tools and spare parts. I can still feel is handprint on my cheek, slapping sense into me. Still; thanks for all you do Moon.
P.S. I'm happy to see my custom skelly boy in the background during the heat gun even though no one will know or give a fuck. XD
thank you for the video
Now for the real challenge: getting replacement joints...
Fuck, now that's a man cave. Jack figurine at 0:24? Respect.
Moon in the last 10 videos: use pincers to add or remove joints and pegs.
Moon now: guess my teeth is all i have!
I experienced broken pegs recently with my rg unicorn fa with one of the ankles and hip joints. Also Much earlier with moon gundam but that was due to my own stupidity. Lesson is check assembly and never paint the insides of joints.
someone send this man a lewd Pippa sweatshirt lol...
it's surreal seeing my mug on your desk
I use the SHIT out of your Mug. If you look carefully, it's in alot of my behind the scenes videos
@@MoonshineAnimations
Moon what do you recommend for a person like me that who wants to make figures
Remove joints and replace them with your abundant supply of neck joints you have from other figures
Man, Moon loves using his teeth. (LOL!)
Thank you So Muchhhhhhhhhh! it worked on my Hatsune Miku Symphony Bootleg Figureeee 🥺 all I can afford for now is Bootleg but still its pretty Thank you So nuch!
You make the weirdest tea.
Duuuuude, I got that Queen set, when I was little me! Since, those good ol shitty McFarlane joint pegs gave out.
I do not have any figma or anything nor have I worked on this but dead ass, as someone with no nails, I agree that teeth are amazing
What an informative video! I do have a question semi-related to it: How do you have so many Figma and figma related parts? I ask because they are usually very expensive or hard to find. I would love to have some that I could customize (make my own OC Waifu lol) so if there is a possibility of finding them more affordable I’m all for it. Even knock-offs seem to be kinda expensive and I got one as my first Nendroid years ago. Anyway sorry for the long message and as always keep up the great work!😃
when all else fails the teeth will succeed lol
My subtitles made moon say “get dicks” instead of “get fixed” 0:19
Lemme get those dicks
Not a miku but my kaito broke his neck during a earthquake, those vocaloid sure love to loose their head
I broke this very joint (shoulder) on a brand new UMP 9 a few months ago and this would have come in handy lmao. Cheers Moon
Noooo, my UMP 45 had the same thing, peg tore off the shoulder in transit.
Were you able to get a replacement or such?
@@randomscottishchick9132 Yup! Goodsmile is really good about replacement parts, even if it takes a minute
5:20 HI, SAUL GOOD-CHAN! HI, LOLI SALAMANCA!
wish japan (or any figma company) would send/sell som spare parts to any required figma needed...
What about hand pegs. Apparently Guts sword was much to big to be called a sword and would constantly fall twisting the wrist joint and one day when putting it back in place the peg broke off.
imagine he bought a heat gun and then played the video and realise u can do it with hot water.
I can now justify so many figma neck breaks... *it was for training!*
Crazy
Man kills Hatsune Miku on camera to play God and revive her
moonshine you animation next