Does the bed leveling have anything to do with the image "lifting" off of the bed. It starts out great and then deattaches about 5-7% through the print
It might affect you a little bit, You might be under extruding you will need to calibrate your extruder. I do not have a video on that but there’s multiple videos online.
Hi, for the bracket for the cr. touch. You can download the STL file. On thingiverse. For the firmware, you will need to go on the creality’s website. Before doing that just make sure to check the version of your board.
@@djsprc Thanks for your tips. One last question: I can only find the firmware for the Ender 3 series. Or does it not matter and it depends only on the motherboard?
@@kbruin79 personally it’s easier to level manually then to do it with the CR touch. If you do the upgrade to the yellow springs that I’m about to do soon on mine, you will need to do less levelling often.
@@djsprc Thank you for the advice. I got this upgrade kit with springs on Amazon. Asin: B081DN6RM2 What do you think? Would you upgrade something else? I noticed that links are not allowed here.
Oh man!!! I truly appreciate this video!! and the GCode!! Your awesome!! THank you sooo much.
Does the bed leveling have anything to do with the image "lifting" off of the bed. It starts out great and then deattaches about 5-7% through the print
It might affect you a little bit,
You might be under extruding you will need to calibrate your extruder. I do not have a video on that but there’s multiple videos online.
g code is great thanks a lot man. wishing you a lot of blessings
Thank you for the video. Can you explain how to retrofit the CR Touch and where to get the firmware?
Hi, for the bracket for the cr. touch. You can download the STL file. On thingiverse. For the firmware, you will need to go on the creality’s website. Before doing that just make sure to check the version of your board.
@@djsprc Thanks for your tips. One last question: I can only find the firmware for the Ender 3 series. Or does it not matter and it depends only on the motherboard?
@@dennyw8357 drive.google.com/drive/mobile/folders/1ksIpQG3mgXbeyhuX-SBMAE3mRGWSbLhr?usp=sharing
@@djsprc thank you very much
My paper isn't getting any fricrion, there's at least half a centimetre between bed and the moving parts help
use the little knobs on the bottom of the bed. Preheat the bed
Nice tutorial. If I don’t upgrade to the CR touch do I need to do bed leveling before every print or only once?
I would do it every two prints
@@djsprc I see. if that’s the case then the CR touch is worth the upgrade.
@@kbruin79 personally it’s easier to level manually then to do it with the CR touch. If you do the upgrade to the yellow springs that I’m about to do soon on mine, you will need to do less levelling often.
@@djsprc Thank you for the advice.
I got this upgrade kit with springs on Amazon. Asin: B081DN6RM2
What do you think?
Would you upgrade something else?
I noticed that links are not allowed here.
@@kbruin79 that’s perfect
Hey, I cannot figure out how to run octo print on my ender 2 pro. Any help?
Great video and code. Now at times I run the gcode back to back and somehow the nozzle would be higher or lower.
Just make sure when you turn on your printer your SD cards always inserted all your machine setting or stored on the SD card.
ohh mann. big thanks for u
No problem