Just a public service announcement for all the "half bucket" comments. Three reasons; 1 The buckets that don't look full are slightly heaped, so if you struck them off they would be a little more than water level which equals full. 2 If you heap the hell out of the bucket and swing with loose material you will end up peppering the truck. 3 Most importantly, the truck can't be overweight driving on public roads or it can be fined. Sooo... This material works out to be 6 water level bucket to bring the load up to the legal limit. Thanks for all the comments though. I appreciate them all.
I was loading out clay type crap in Deland Florida some years back with a new 450 JD and they took 4 buckets a load and they were probably overweight, for a month I was loading out an average of 350 a day . Now I'm running a 470 Hitachi and loading 50 ton cats which I like more . Those triaxle drivers cry to much.
Why are you worried about overfilling the truck with full buckets??? Just heap the buckets and put one less in the truck for same legal amount. Just looks like you are trying to get a full day out half days work...
Man I wish the ground condition were like that were I operate. Everything here is either mud, sopping wet clay, solid ledge, and everything has boulders and rocks everywhere. You never really get to run wide open and just hog into banks, you have to be gentle because there's giant stones everywhere in almost all materials that stand up a 336dl on its toes. Keep on swinging man, smooth running.
Bunch of armchair operators here! There’s plenty of dirt in the buckets. Everyone has shit to say but I guarantee half these guys commenting couldn’t even start the thing. These are the kind of people who ask to try out your skid steer and then have to call you and say hey I can’t start it.
The people that are talking shit in the comments have no fucking idea what they are talking about lol. Probably rental a home depot mini ex one time and think they are a damn operator... you loaded quick and smooth great job
What is it half load season where u are??. The front of the box is empty. It would be different if it was material that stuck in the box but that's beach sand. Load them up. Always front to back. Waste of a trip
It's kind of hard to tell from the video, but the ground was really wet. After a couple of buckets with the loader it started sinking out of sight. That's why I had to reinforce the ramp for the trucks with road base material, so they wouldn't sink too.
+diggerman57 if you notice i put that lol on the end i seen what you have there and believe me i know them big loaders punch up the ground i am so bored i am on here looking at videos i go back too work monday and i will post some vids for you too critique be safe!!
+Mark 1970 I wasn't being defensive, I just figured I'd explain so people understand. Good luck with going back to work, definitely throw up some videos.
Just a public service announcement for all the "half bucket" comments. Three reasons; 1 The buckets that don't look full are slightly heaped, so if you struck them off they would be a little more than water level which equals full. 2 If you heap the hell out of the bucket and swing with loose material you will end up peppering the truck. 3 Most importantly, the truck can't be overweight driving on public roads or it can be fined. Sooo... This material works out to be 6 water level bucket to bring the load up to the legal limit.
Thanks for all the comments though. I appreciate them all.
I was loading out clay type crap in Deland Florida some years back with a new 450 JD and they took 4 buckets a load and they were probably overweight, for a month I was loading out an average of 350 a day . Now I'm running a 470 Hitachi and loading 50 ton cats which I like more . Those triaxle drivers cry to much.
P.S. so many wanna be operators on here that wish they were good or really did run equipment.
But you sure as hell burn alot of fuel whit that extra bucket of soil on every truck, and if you shake the bucket a littlebit it wont spill anything.
Or just a small suggestion put 5 full buckets I have had the same problem and adjusted with bucket size and or machine size
Why are you worried about overfilling the truck with full buckets??? Just heap the buckets and put one less in the truck for same legal amount. Just looks like you are trying to get a full day out half days work...
Man I wish the ground condition were like that were I operate. Everything here is either mud, sopping wet clay, solid ledge, and everything has boulders and rocks everywhere. You never really get to run wide open and just hog into banks, you have to be gentle because there's giant stones everywhere in almost all materials that stand up a 336dl on its toes. Keep on swinging man, smooth running.
Jon fuck man try working at a landfill. Never anything smooth.
Love the turbo sound! CAT Power!!!
He wasted more time raking the dirt up than he did loading...FYI it’s more important to load than scrape...great learning video.
great work. nice and smooth
Thank you Rachael Deckard.
diggerman57 Fill.pins.full.DIRT..MESS.SHIT
Bunch of armchair operators here! There’s plenty of dirt in the buckets. Everyone has shit to say but I guarantee half these guys commenting couldn’t even start the thing. These are the kind of people who ask to try out your skid steer and then have to call you and say hey I can’t start it.
One beep to stop two beeps forwards one beep to back up when empty !
The people that are talking shit in the comments have no fucking idea what they are talking about lol. Probably rental a home depot mini ex one time and think they are a damn operator... you loaded quick and smooth great job
Top Arbeit , schnell und sauber
MoRpHeUs D Danke sehr
Everyone likes running an excavator vs a loader. Duh. LOL
What is it half load season where u are??. The front of the box is empty. It would be different if it was material that stuck in the box but that's beach sand. Load them up. Always front to back. Waste of a trip
Every window and door open 🤦🏻
Those half full buckets hurts my soul, and why use a tooth bucket? leaves the ground uneven and needs to be smoothened...
Joyblast your honestly a lot better off loading with the excavator but just not this guy😂
I would load the fuck out of them trucks
You only have to fill the bucket up the teeth when you’re loading on road trucks. It’s to avoid making a mess
Brian Newsome well there on the road so have weight limits so would u fuck
chargement avec souplesse bravo.
jeanmi974 caterpillar ة
jeanmi974 caterpillar
Why not just use the loader?
The ground conditions were not the best for the loader. It was easier to load out with the excavator.
xXThermobaricXx because he wouldn’t be Abel too run the ex
Psssshhh eff that!!!!
Half buckets are killing me
Fill the bucket!!!
looks like someone just dont like too run the loader lol!!
It's kind of hard to tell from the video, but the ground was really wet. After a couple of buckets with the loader it started sinking out of sight. That's why I had to reinforce the ramp for the trucks with road base material, so they wouldn't sink too.
+diggerman57 if you notice i put that lol on the end i seen what you have there and believe me i know them big loaders punch up the ground i am so bored i am on here looking at videos i go back too work monday and i will post some vids for you too critique be safe!!
+Mark 1970 I wasn't being defensive, I just figured I'd explain so people understand.
Good luck with going back to work, definitely throw up some videos.
He not even fulling up the bucket
Not very proficient
Can I operate a excavator