Good demo of v-belt tensioning. Though it looks like the measuring range of that instrument is too large to get an accurate tensioning for your specific belt. A tensiometer with a smaller range on both the force and deflection scales may give you a more accurate tensioning.
Any industrial supplier should have a belt tension gauge especially if they sell belts. Good year, Gates, Eagle... all make a belt tension gauge. I have even found them on amazon for very reasonable prices.
Hello Sir, I am following you from Algeria. Greetings to you. I have a question. I have a motor with a power of 15kw and 3000t/m. I want to reduce the rotation to 1500t/m. What are the diameters of the pulley for the motor and the other for the opposite one
Just to follow up. There is a small key or hex plug/bolt about an inch deep in the slot where a longer key would normally be installed. I don't know it mine just shifted over but it was impossible to remove. I ended breaking the wheel and having to grind off the remaining hub.
![เจอประจำ ตอน เปิดเทอมวันแรก [EP.29]](http://i.ytimg.com/vi/eFK-B836i60/mqdefault.jpg)
Very good explanation 👊
what if you don't have manuals or any investigating materials, how do i find the belt deflection force.
nice knowledges sharing...i subscribed!
Good demo of v-belt tensioning. Though it looks like the measuring range of that instrument is too large to get an accurate tensioning for your specific belt. A tensiometer with a smaller range on both the force and deflection scales may give you a more accurate tensioning.
Where did you get the tension gauge? Is there a specific kind recommended for millwright mechanics?
Any industrial supplier should have a belt tension gauge especially if they sell belts. Good year, Gates, Eagle... all make a belt tension gauge. I have even found them on amazon for very reasonable prices.
Awesome video! Thank you!
Thanks
Hello Sir, I am following you from Algeria. Greetings to you. I have a question. I have a motor with a power of 15kw and 3000t/m. I want to reduce the rotation to 1500t/m. What are the diameters of the pulley for the motor and the other for the opposite one
Do the Gates Krikit belt tension gauges work just as well?
I believe it would.
great
hi. can i press the tester from the internal side of the belt? (due to space issue). thanks
I would think so. Let me know how it goes.
@@saitmillwright804 already did that. test run at max speed (700 rpm) and it didnt sound like theres a problem
@@zefferysoo That's good to hear. Thanks for letting me know.
Sir I nded this chart
I need to know how to get that god damn pulley/flywheel off ffs. lolol
Just to follow up. There is a small key or hex plug/bolt about an inch deep in the slot where a longer key would normally be installed. I don't know it mine just shifted over but it was impossible to remove. I ended breaking the wheel and having to grind off the remaining hub.
It's not a prison shiv...it's Sheave. Pronounced She-eve
Lol I was thinking the same thing. Then I realized it's the Canadian accent.
most fitters (millwrights for you northern blokes) just poke it with their fingers and go "yeah she's good enough"
She ain't too tight, she ain't too loose. Run it. 🤣
V belt hai