Unit Convert Jingji Maxim Defense,, Kritik dan saran, silahkan di sampaikan di kolom komentar.. untuk order silahkan mampir ke link berikut: tokopedia.link...
Have you seen the weidi pdx, it's basically got a gen8 gearbox so in wrapped that i got the jingji and i have several slr's so had to go with the jingi and even though it's over $120aud cheaper i don't care jingi has already got me and im so happy with the sturdy construction
Can you tell me what brand of aeg gearbox you are using for your jingji pdx? I'm planning to convert my gel blaster to aeg. Is there any necessary modification (for example on the receiver, gearbox, etc) ? Hope u can reply me soon
I use a gearbox from E&C, and to be able to convert the Jingji PDX to an AEG, you have to cut the magazine stopper on the lower receiver (make sure your AEG Magazine seated properly on the magazine catch) and scrape off the top of the chamber seat on the upper receiver (make sure your hopup chamber seated properly & can be move properly on upper receiver)
I have and i think im going to give it a go, i may be able to source a barrel and ammo here in aus just waiting to hear back on monday and i can get a thop for aeg off ebay and there's also magazines but they are very expensive and a supplier in Australia has the pdx with the non pistol brace pdw stock and i hear that the one's at ihobby are made by wells and are $130 dollars cheaper than the jingji, jingji $365 wells or nwells $235 big difference in price no idea about quality but jj would be better in my opinion and i think that im going to mod a gelblaster magazine instead of spending nearly $100aud for a hicap m4 magazine and instead of getting a shs nozzle i may try one of the adjustable retro arms gel blaster adjustable nozzle without the rubber tip, i want the leave asmuch gel blaster part's in place and being a wells make most of the part's are proprietary part's so there are alot of airsoft part's in the older version's and probably the new
A friend just sent me the gearbox out of his E&C and it's a red and black split ldt ldx advanced gearbox even though it says that they come with the black and blue split ldt ldx basic gearbox and only difference between the two is one comes with a programmable digital trigger units but i haven't checked the the one that was sent to me yet
Need very small battery but im going 9:1 dsg so needs alot of power so im probably going to use my brick batteries with my velcro straps to hold the batteries inbetween the metal rails of the sbpdw buttstock
Have you seen the weidi pdx, it's basically got a gen8 gearbox so in wrapped that i got the jingji and i have several slr's so had to go with the jingi and even though it's over $120aud cheaper i don't care jingi has already got me and im so happy with the sturdy construction
No, i haven't
Can you tell me what brand of aeg gearbox you are using for your jingji pdx? I'm planning to convert my gel blaster to aeg. Is there any necessary modification (for example on the receiver, gearbox, etc) ? Hope u can reply me soon
I use a gearbox from E&C, and to be able to convert the Jingji PDX to an AEG, you have to cut the magazine stopper on the lower receiver (make sure your AEG Magazine seated properly on the magazine catch) and scrape off the top of the chamber seat on the upper receiver (make sure your hopup chamber seated properly & can be move properly on upper receiver)
@@syafiqkomp4447 I thought about doing it until i was told if i pull it off and get pinched it's a fine of $120,000aud so i thought f@#k that
@@drewmurray6480 haha,, just consider it
I have and i think im going to give it a go, i may be able to source a barrel and ammo here in aus just waiting to hear back on monday and i can get a thop for aeg off ebay and there's also magazines but they are very expensive and a supplier in Australia has the pdx with the non pistol brace pdw stock and i hear that the one's at ihobby are made by wells and are $130 dollars cheaper than the jingji, jingji $365 wells or nwells $235 big difference in price no idea about quality but jj would be better in my opinion and i think that im going to mod a gelblaster magazine instead of spending nearly $100aud for a hicap m4 magazine and instead of getting a shs nozzle i may try one of the adjustable retro arms gel blaster adjustable nozzle without the rubber tip, i want the leave asmuch gel blaster part's in place and being a wells make most of the part's are proprietary part's so there are alot of airsoft part's in the older version's and probably the new
A friend just sent me the gearbox out of his E&C and it's a red and black split ldt ldx advanced gearbox even though it says that they come with the black and blue split ldt ldx basic gearbox and only difference between the two is one comes with a programmable digital trigger units but i haven't checked the the one that was sent to me yet
We need to it translated into english
I'm working on the translation, hopefully it will be finished soon
Is the rotary hopup assembly plug n play in sijun ?
No, you have make some modifications
@@syafiqkomp4447 can u please make a vid how u did it ? Btw so inspired by your works keep doin the great job
@@user-sq9xo6ek4x ok let's see..
@@syafiqkomp4447 or atleasth can u send me a picture of the mod u did in the upper reciever and mag catch
Grendel macet sama tidak berfungsi lagi apa penyebabnya om
Mungkin di dummy Boltnya nyangkut
bisa dibuatkan lgi kah bng ?
dan jasa konversi nya brapa ?
Jasa konversi disesuaikan dg konsep konversinya, 300-500rb diluar sparepart dan biaya ekspedisi
@@syafiqkomp4447klo konversi jasa sama peralatan semua brp bang ?
@@heronoob8590 tergantung peralatan nya,, mulai 2jt dan bisa sampe 20jt..
om bisa konversi lehui kriss? kira2 brp ya
Saya belum bisa convert model kriss vector, gearbox nya rada susah
berapaan
Sold om..
@@syafiqkomp4447 wgb nya beli berapa
@@Kenketsu1 wgb nya saja sekitar 2,6jt
@@syafiqkomp4447 yang 200k an bagus gak kalau dijadiin aeg uang paspasan nih
What batteries are you using
Onbo 3s 11.1v
Need very small battery but im going 9:1 dsg so needs alot of power so im probably going to use my brick batteries with my velcro straps to hold the batteries inbetween the metal rails of the sbpdw buttstock
@@drewmurray6480 I think that's better
Om klo beli unit ini Berapa seperti di video speknya?
Sekitar 4,5jt..
Om aplikasi crono ny apa ya om
Acesoft, saya kombinasikan dengan Acetech Lighter Bt Tracer
Bang wgb 200 ribuan upgrade fps bisa ga?
Harusnya bisa gan,,
Habis brapa ini bng unit, konversi & upgradenya ?
Up to 5jt
dijual berapa
Silahkan bisa di cek di Link yang ada di deskripsi gan..
Bng pake per m150 kah ?
Iya Om..
Gearbox standartnya di jual ga om?
Saat ini saya pakai gan, saya bikin gel blaster body fullmetal..
@@syafiqkomp4447 okay om makasih ya🙏🏻