TOSHIBA Satellite A135 laptop take apart video, disassemble, how to open disassembly
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Hi!
No music. No talking. Just work.
If you are taking your TOSHIBA Satellite A135 laptop apart be careful and wear an anti-static wrist band or use other anti-static device. If you need to change a LCD usually you don't have to take screen out of a laptop. You can leave it on a laptop and watch the last part of the video where I am taking LCD apart. If you need to change a keyboard, you don't have to take all bottom screws out. There are usually some marks, like a keyboard picture, on a case bottom. If you need to put a laptop back to work be aware of screws. They are different and you better remember or mark them somehow to insure that you will put them back in to a right place.
Some laptops I take apart first time, so don't be serious on my time and performance.
If something got broken - ooops, it's your fault.
Believe me, some parts in your laptop are already broken, you just don't see that..
So, just watch this video and fix your laptop.
Have fun and good luck!!
regazzz #recycling #recycle #upcycling #zerowaste #sustainability #reuse #environment
#handmade #waste #sustainable #diy #vintage #recycled #demolition #upcycle #design #scrap #repair #disassembly #Technology
You are right and I always encourage people that if they are not sure - better they will go to a trusted technician that will fix their laptop.
Just wanted to say thanks, saved me a lot of headache watching you do this.
Reduced to a collection of parts in less than 15 minutes. Impressive.
usually people wait till the screwdriver is on the screw to push the button. lol i like how you start the drill and then try to just push it into the screw.
It is pretty easy to find. If you will go to Google or ebay and type Toshiba A135 DC jack - it will be a right one and it will fit.
thank you so much you have no idea how much you helped me
You can try screw extruding bit, also u can use regular bits backwards
For the record, for those who reassembled the notebook and it wont power on go check the conector strip (disconnected in the video at 6:26). Try blowing the strip and the jack on the motherboard (plug the power cord, press power button and see the power light up). Another cause may be on the processor safe screw not being screwed up correctly
Hey, thanks! Useful advice!
What is that second bay for? It is size of hard drive but there is no SATA connector....
it ws interesting watching you have such difficulty with removing that speaker cover
+AVSCDvideoproduction true that, I am always looking at that facepalm if I need a good laugh.
Very good detail video! Thanks a lot. Camera view is also nice shows every detail
Thank you for your sharing - helped immensely.
You are welcome!
really??? a power tool to remove screws from a computer????
i know right
You are very welcome!
Very instructed video. Thank you! I have to disassemble one of this.
If you will remove it - you will need to weld it back. I don't do this type of thing because not everybody know how to and if I will remove it, they will be like screwed, what is not good.
Thanks that I think to I have taken it apart yet. Trying to reset the BIOS and jumper is not doing it.
A135 power button cover is hard to remove, they have a stupid hooks that are going bad. Anyway, thanks for watching!!!
(comments on approval, sorry)
I would really re check every connector again, maybe something is not connected well?
Power button, did you checked the cable that is connected to power button by it self?
You are welcome!
Friend very good video, but I have a query, you knows what power jack model, is that I have the same laptop, but before disarming me know the model of the power jack
First appear at 9.04 on the left side from memory slots.
In the video what drill were you using and if by any chance can it remove stripped screws because I have a lot on mine which prevents me from opening the laptop fully. If you have any advice for my situation I would be glad to listen and try them out.
Thanks friend, you save me again, You are the Best.
check this power button, can it be that it is damaged at some place?
If battery in and you plug it to outlet does it charging battery? Does it start without battery but on power supply?
It would help naming the parts as you take them out.
+Slossage17 that's why I created a video about all laptop parts. It is pretty lame to repeat them in all 400+ videos.
+Slossage17 th-cam.com/video/umxZ_nqzxNk/w-d-xo.html
Ok thanks i'll try it and hopefully it will work. Thanks for the help :)
Tengo ese modelo viejo de laptop, no venía con Bluetooth, se le podrá instalar un módulo Bluetooth internó?, Sin necesidad de sacrificar un puerto USB?, Gracias
sorry about the repeated msgs.
yes i checked all the connections twice.
the connector for power button is through flat cable, right? its ok. any other cable to be checked?
Honest to tell, I never removed this type of battery, it is somehow sitting there and you can't unplug it. You may need re-solder it after removing...
Sorry, can't give more info here.
I have this same laptop, and it has been overheating a lot, as in after half an hour of use it gets dangerously high. So I was wondering how if I want to get into the fan with the exhaust next to it, if I would have to take the whole thin apart or can I just magically take the bottom panel off? ((Cleaning out dust buildup))
indicator lights are on if power plugged in and if battery is charging.
but laptop does not come on nor the power switch lights up.
Hello, where is the CMOS battery? I've been watching the video and I can't find it and I need to replace it.
pretty much all parts you can find on ebay for example...
Thanks!!!
I just need to change the palmrest cover ¿do i really need to remove the speaker cover and the keyboard?
THX A LOT MANNN... I LOVE YOUUU MUACHHHH... VERY HELPFULL SIR
Wear is the huge button battery? there is a virus in the bios... Is it what I saw pasted into place?
In the video what drill were you using and if by any chance can it remove stripped screws because I have a lot on mine which prevents me from opening the laptop fully. If you have any advice for my situation I would be glad to listen and try them out.
EDIT:
I forgot to mention that the port for the the white cable next to the dvd controls on the left side of laptop broke. Is there anyway I can find a replacement for that?
it shows light with power supply and with battery in it shows charging light along with power light. thats it, no power switch light or start up.
Hola amigo y despues de esarmarla de tu modo se puede volver ha armar? tienes un vídeo armandola?
Si me contestaras me ayudarias demaciado
Hello sir, I have a working A135-S2276 in great condition, except that the mouse pad and buttons are totally unresponsive. I can get replacement palm rest for cheap but all are in bad esthetic condition. Can I replace ONLY the mousepad (and avoid using the gross palm rest mouse buttons/plastics) on this model or are the buttons married to the mousepad? Thank you very much for your time.
Thanks, helped a lot.
i dismantled the laptop and assembled it back, but now it is not coming on.
what could have gone wrong? i dismantled it again to check if all the connections were ok, but unable to find the reason why it is not powering on!!
So, I'm staring and staring at every second of this video but I still can't see the CMOS battery. Where is it located? Do I have to dissasemble the entire thing to get to it?
Joseph Sagstetter back of the board. so yes but it's soldered in.
Nope, there is no other way. Case bottom is like a base and everything goes in there. Some regular compound or arctic silver.
I am not really sure... maybe google it for exact video or text how to...
how to i check that? its bit complicated to open the power button panel.
Thank You!!
Thanks. is it a removable battery?
Muy bno me sirvio, no sabia como sacar la parte de adelante y el teclado...
Tan solo era a fuerza hajajajaa me daba miedo partir la tapa pero gracias ! :D
and battery how out? is welded from the motherboard... how do ?
make sure they aren't stuck somewhere...
Hi. I opened my Satellite A135 to apply thermal paste on the CPU and clean the fan. I closed it up but when I switch it on, the screen remains black. The laptop lights on but nothing on the screen. Help please!
You didnt put RAM the right way.
I cant take off the cables that are bellow the keyboard
Where is the battery on the motherboard?
Grasias
nice
Se le pude cambiar el procesador?
I need your help please,., i have one of them, i never desasembled it, i would like to know, how many memory modules comes with that, my system says it has 1 Gb RAM, I mean , are there 1 memory module 1Gb or 2 modules x 512Mb,. I dont know ,. thanks. another thing ,. is 533Mhz.- right? thanks again
Hello, look at my video. At 1.11 I am opening little door and there are memory slot. You should have the same. There will be more likely 2x512
y que tipo de memorias ram ocupa y hasta cuanto soporta porque por el momento solo tiene una de 2gb y una de 256 salsudos desde el salvador
I would say 3 gb is maximum.
thanks
harsh nisar you are welcome!
cuanta ram soporta?
and battery how out?
Hello,
changing a backlight is not easy, unless you know how to... a lcd for this laptop will cost not a lot of money...
Obrigado!.
oye amigo como hago para reparar el cooler de la a135 de repente dejo de girar
you may need to change a fan
how do you reset bios password on this laptop?
Grax
Hello: one question...
I can increase my RAM and my video card, I have the same laptop???
it has a gpu?
Well my laptop no have mercury in my display
eres demasiado caimán loco vrrrrr
Raul Azuaje Gracias, amigo!
Excelente trabajo, me fue muy útil el vídeo, muchas gracias.
so to upgrade a cpu, you have to pretty much strip it completely apart. Unreal. I am stick to Dells. CPU upgrade takes 20 seconds.
NEVER use a powered screw driver on your laptop. If you slam these parts around, it will probably tear up more than you fix. This should be an example of what not to do, when you need to take apart your laptop. SEE A PRO !
I have this toshiba a135-s4666
el procesador se le puede quitar?
Jose Leyva should be, it is pretty old laptop.
No es tuya la laptop verdad amigo? jajajaja
Debe ser el de la suegra o ex novia
i swear my right hinge is super glued
Yeah, some laptops have it and this is a total mess. It doesn't comes from a factory like this, some people fixing it this way.
Does it show anything when dead
+Dark Wolf Depends how dead is it...
regazzz idk my dad found it in the junkyard but everything was with it except the charger it looked fine just a few dents
+Dark Wolf I believe any regular Toshiba charger will fit. If you found a charger, plugged in and no lights nothing happens, it can be either motherboard or DC jack. I would open first and check how it looks like inside (maybe there was some liquid damage and motherboard is bad) If everything looks more or less ok, you would need to test DC jack.
With all due respect, the anti-static strip is really unnecessary. I've disassembled and reassembled countless computers, on carpet that holds static like anything and on plastic mats for offices.
Never blown a part due to static ever.
Christopher Kidwell honestly, I am wearing it only for people who will tell me that it should be there :)
Kiran is famous
Yeah, this is ridiculous. Yep, most dells are easy :)
hola
Ok
dit yo u put back to gether
Not this time :)
q mal trato Esa no anda mas
heh, yeah, it is stupidity of my.
pika
All of these steps just for replacing a battery. What a dumbass design.
lolwut? The battery just slides in and slides out, this is the 'tear the thing totally apart' disassembly which you do when you need to replace a screen, replace a fan in the computer, etc.
You are welcome!
indicator lights are on if power plugged in and if battery is charging.
but laptop does not come on nor the power switch lights up.
You are welcome!
indicator lights are on if power plugged in and if battery is charging.
but laptop does not come on nor the power switch lights up.