BIGGEST 3D PRINTED HOUSE IN THE WORLD UNDER CONSTRUCTION
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2022
- This projects in Houston, Tx by PERI is pushing the boundaries of 3D printed construction into new territory exploring overhangs and 40 ft tall sections! Today we speak with the PERI team and tomorrow I will attend their media day to interview architects, material suppliers, and the general contractor of this 3D printed home.
“How to 3D Print a House” Course - automate.construction/course/
Automate Construction Podcast
/ @automateconstructionp...
Automate Construction Website
automate.construction/
How I make money$$$
“How to 3D Print a House” Course - automate.construction/course/
Book a Consulting Call - jarettgross.youcanbook.me/
Virtual Village - automate.construction/virtual...
Follow on Social Media
Facebook - / automateconstruction
Linkedin - / 81956758
Reddit - / automateconstruction
Twitter - / jarettgross
Instagram - @automateconstruction
/ automateconstruction
TikTok - @automateconstruction
www.tiktok.com/@automateconst...
Write an Article for www.Automate.Construction
automate.construction/upload/
Submit a project I should feature!
automate.construction/upload/ - วิทยาศาสตร์และเทคโนโลยี
a lot of improvements here. Chilled water and the control station is what I got out of it for the on side engineer
Fantastic video! Really appreciate the transparency and educational bent of the Peri team. As a brutalist architecture enthusiast, it is really cool to see this technology pushing on the aesthetic front as well. Cheers Jerett and Peri
Too cool man, way too cool! Can't wait to see the mated wooden rafters and how it looks with those uplights
Cool mullet, bro. Respect.
This is going to be an amazing house. I can't wait to see it finished.
Wow never seen one this big can’t wait to see what it looks like when it’s done
Very impressive.
Nice one Jarett. You are doing amazing work!
Thanks I’m really lucky there are so many groups pushing this tech forward and allowing me to film their progress!
THANKS JARETT AND WE ALSO WANT TO GIVE A BIG SHOUT OUT TO THE PERI TEAM 🤗😎👍💚💚💚
They’re doing great!
Nicely done!
Really Great Video!!! Thankyou so much🏆
3D printing is a fast changing industry! Not as fast changing as your hairstyles though! lol
Looks like solid good work
This is epic! THIS is the future.
I'm new subscriber. Thank you for making videos. Hope you will mention around cost of this house too
when tech nerds are taking over construction sites :D great effort!
I have to see this thing. Looks way too cool on screen.
I bet they might have more public facing events before it is complete
I live in Houston and would love to go visit this property. Is the address available anywhere? How can a person view the building in person?
They may do media days sometimes or even a public facing event as it nears completion. It would be a great opportunity to show off their amazing work. It’s not my place to share the location on the internet.
How long is this actually taking to build? Update?
What was the cause of the vertical crack (video at time 0:56)? Was it a material failure or buildability issue?
There is poured concrete with rebar behind it so no issue
@@sh265 Structurally, that is good but what about astecically? The exposed layers are the feature of the house.
Hey Jarett, do you have more information and Pictures of this 2Story Printed house by Peri?
Yeah tons! I’ve visited several times I’m making a longer video of all the progress which will probably be released in a couple months when the printing is done.
How do I get in contact to build one? I've tried to contact the one out of Austin, but no answer.
It’s expensive but I suggest reaching out to multiple companies to increase the chance of getting a response or you can book a consulting call on my site and after I throughly understand your goals I’ll connect you with the right teams.
6 months in I'd like to see a finished project !!!
I want in ! I want in now! First pay-check goes to anyone who can help me find anything in Europe or anywhere else really (any position really where architect & inventor and especially super fast learner could render oneself useful) :) I know how 3D printing should be like in order to have unlimited printing volume + be virtually fully autonomous + most authentic and economical (making use of local materials + special aditives)
This company peri and the printer company Cobod are both in europe
@@automateconstruction Thank-you ! :)
issues are governmental agencies are not as quick to embrace. Serious engineering requirements - I think kinda prohibitive.
I love 3d printing
Hey Jarett, in your opinion what printer has the best architectural capabilities? As in layer quality, overhangs, etc.
Architectural capability is too big that could be measured in overhangs or resolution or just general print quality because the layer line quality really lens to the aesthetics of the overall project. Not to mention the architectural design of the file itself, which doesn’t really depend on the printer. with such a big question I can’t possibly pick one company but if you want to try and be a little bit more specific, maybe I can give you an absolute answer.
How are they different from century 3D homes?
It should have water inside the walls for best thermal mass + useful preheating of consumption water :)
Very interesting idea. I’d love to hear more, I’m working on the first project in Colorado.
@@Revolutionizehousing Perfect ! I'm looking forward to this :) Where can I reach you ? Thank-you ;)
Cool! feel free to email me via jarett@3dprinted.construction
The thermal conductivity of water is only slightly lower than that of concrete. So practically it would be the same as no insulation at all.
@@deafblindnoob2748 Thermal mass insures insulation by delaying the heat transfer not bu reflecting it, like a typical insulation based on air. Basically, the whole wall becomes a heat sink and can be used to trap heat from the sun during the summer and then have that got water stored in underground insulated 😁storage... During the cold season the empty walls will act as any other porous material and thus insulate
What’s the square footage on the largest single family home Jarett?
This one is over 3000 sqft
I would like to have a home like this here in europe but it way too expensive for me to afford
Remember the first 3D printed French provincial Mansion three stories with glass atrium 50,000 dollars. Contour crafting
This project is just around the corner from me. Every time I go by to check on progress, nothing happening. Is it abandoned? It's certainly far from complete. 12/05/2023
Will that reduce the costs ? 50%. Will that decrease production time 50% ? Will be that available for everyone when In 2155r ?
Year 2155? Perhaps… Today? I don’t think so yet, they are getting closer though.
woooooow
Can this structure withstand Category 5 hurricanes, Jarett?
How long does these homes can last????
Only time can tell but most companies report they expect the printed homes to last 75 years.
How much does it cost to kick start a build? Rough estimate..
I take it.
How much is this 3d printer
The problem is we don't really have enough concrete for this to be mass scale.
Need to be sustainable materials, Nothing beats wood.
Efekt może być ładny, ale czy beton nie jest toksyczny ?
Love it seen some 3d printed houses in person / bldgs love it. Happy that they are improving the tech can't wait to see when it no longer needs manual labor and is just AI, robotics and automation. 🤗😚😙😗😘😍🏳️🌈🏳️🌈✌🏽P💗L🤝🏽U🙏🏽R
+1👍 💪
Can u help me I need this I am in India
Show us the end result....
Hey jarret god to know about your project
Can i know how much strong is this house than brick house
Comment
I am waiting
Your subscriber ❤❤
Not my project this is by PERI. What type of strength are you referring to?
They pushed the limit. Go for the best tech. And you can't buy a better camera or mic for your video? The content is great but I think it's time for you to step up your tech a little bit too. Thank you for your content tho!
Anyone know the address?
I’ll ask if I can share that next time I’m there
I wonder if anybody as thought about building the world’s biggest 3D printer in their house?
That doesn't sound big, I've had a 7800 ft house and that didn't inculde the swimming pool byt should have it was indoor and had helicopter pad on the roof. I want to look into this material!!! I'm about to build using jack arnald for an archatecht ... screw the spelling lol
Well that house wasn’t 3d printed so it doesn’t count
@@automateconstruction Your right, but I want one, a 3d printed house. I'm gonna try looking these guys up and see what we might do
Can you print Lilly Pads? Somewhat like the Johnson Wax Building by Frank Lloyd Wright th-cam.com/video/Mj8qH3GGSYk/w-d-xo.html
This is been "Under construction" for almost 3 years now and still nowhere near complete.
The printing started less than a year ago, it’s an enormous project and completely one of a kind. Groundbreaking tech is not fast out the gate.
@@automateconstruction My friend lives 3 doors from it, lets just call it an endless projects at this point.
@@Timanator ahhh cmon have some patience it will be pretty cool when it’s done. It’s much quieter than other construction methods would be.
ужос
Stupid gimmick.