You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
These videos demonstrate how you can always learn something new - I had never thought of the block with the hold-fast holes drilled into it. Brilliant idea!
I'm just finishing to build a fancy workbench in which I didn't want to bore holes. The advice of a piece of wood with holes in the tail vice is priceless! Thanks!
In my opinion, it is a bad idea to have a fancy workbench that you do not want to bore holes in. When i was an apprentice, i was taught the importance of wearing dedicated work clothes - anything that takes away attention to the tools you are using can become dangerous. If you are wearing your favourite shirt, part of your attention is on not ruining that, when it should all be on the workpiece and tools you are using. The same can be said about your surroundings, including your workbench. Build a sturdy workbench that is made to be used, not to look good!
@@pinkerbot That's all good advices, unfortunatly I live in a tiny house and don't have space for a proper shop. I do have a not-fancy heavy-duty moravian workbench outside in the garden but not really well suited for winter woodworking. So the new fancy one is in the living room. With my previous roman workbench and the fancy handtools, everything looks pretty and asks only to be used every day :)
9:23 “There is no reason why you should be doing anything with the workpiece not completely safely secured” This is an “Aha” moment for me. I am coming to carpentry from Green Woodworking; spoon carving in particular. I have always held the workpiece in my hand. I think this is a major defining difference between the two. Thank you for stating simple basics Graham. It is very helpful.
@@gjbmunc I think perhaps that statement ("There is no reason why ...") properly belongs at the beginning of the video, as motivation for why we want to use these devices.
Once again Graham your videos have such golden nuggets that inspire an " Ah hah " moment. The lip on the mitre box is brilliant . Thank you and Christmas blessings to you and yours .
Mr. Blackburn, thank you so much for all the work you put into your page. Thank you for sharing your knowledge and experience. The “eureka” moments have opened up new possibilities, especially for a guy like me working with restored hand tools on a slab made of 2x4’s.
Finally someone using carpenter stuffs similar to my grandfather. Brought back so much wonderful memories. Carpenters' wisdom. Thank you very much Sir.
To be honest, I am a learner sir, loved watching your video, ur good tutor sr I tried making one working bench, it's height had came up to Hip level, ,too high to High for planning wood planks, can you suggest 😅 some ideas
"Scandinavian" style benches (i have a hunch that it is actually a german design that krenov ran across in sweden) atcually used to have a very lose face vice. Basically an overzize clamp built into the bench and much clamping was done in the rear vice. Ripsawing etc
Great suggestions, new subscriber, I called Santa Cruz home for the 70s and 80s, getting hammered now, making shavings now in NY, small world. Looking forward to interesting things. Thanks.
I'm glad I decided to watch a quick video before I started work. Very informative. You have explained to me a few things I haven't seen before and I'm happy to have watched your video. Very professional and easy to follow. Thanks.
Great video, thank you so much Graham! I secure my miter boxes using a dogs. The only inconvenience is not-so-accurate distance between a dog holes drilled by hand.
I really like your idea for the pony holdfast. I just figured that I would never really be able to use a holdfast on my workbench because it's not thick enough but after watching this video you showed me that in fact that I actually can. Thank you.
It was helpful. Thank you. So many out there talk of the wood work machines, but for those who want to use hand tools where practical your channel is a valuable site.
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
Great!
These videos demonstrate how you can always learn something new - I had never thought of the block with the hold-fast holes drilled into it.
Brilliant idea!
Yep, I am eternally gateful for all the things that different craftsmen have taught me over the years. There's always something new!
I'm just finishing to build a fancy workbench in which I didn't want to bore holes. The advice of a piece of wood with holes in the tail vice is priceless! Thanks!
In my opinion, it is a bad idea to have a fancy workbench that you do not want to bore holes in. When i was an apprentice, i was taught the importance of wearing dedicated work clothes - anything that takes away attention to the tools you are using can become dangerous. If you are wearing your favourite shirt, part of your attention is on not ruining that, when it should all be on the workpiece and tools you are using. The same can be said about your surroundings, including your workbench. Build a sturdy workbench that is made to be used, not to look good!
Totally agree!
@@pinkerbot That's all good advices, unfortunatly I live in a tiny house and don't have space for a proper shop. I do have a not-fancy heavy-duty moravian workbench outside in the garden but not really well suited for winter woodworking. So the new fancy one is in the living room. With my previous roman workbench and the fancy handtools, everything looks pretty and asks only to be used every day :)
9:23 “There is no reason why you should be doing anything with the workpiece not completely safely secured”
This is an “Aha” moment for me. I am coming to carpentry from Green Woodworking; spoon carving in particular. I have always held the workpiece in my hand. I think this is a major defining difference between the two. Thank you for stating simple basics Graham. It is very helpful.
Safety is so important - you need all your fingers!
@@gjbmunc I think perhaps that statement ("There is no reason why ...") properly belongs at the beginning of the video, as motivation for why we want to use these devices.
I cringe every time I see an example of bad work holding on TH-cam, it teaches bad habits to a whole generation of new woodworkers.
Once again Graham your videos have such golden nuggets that inspire an " Ah hah " moment. The lip on the mitre box is brilliant . Thank you and Christmas blessings to you and yours .
Thank yhou, and the same to you!
My father (1919-2010 - RIP) made a workbench exactly like yours, and now I have it!
Sounds great! Hope you get to pass it on as well!
Mr. Blackburn, thank you so much for all the work you put into your page. Thank you for sharing your knowledge and experience. The “eureka” moments have opened up new possibilities, especially for a guy like me working with restored hand tools on a slab made of 2x4’s.
You are very welcome
Sir, thank you
You're very welcome!
Finally someone using carpenter stuffs similar to my grandfather. Brought back so much wonderful memories. Carpenters' wisdom.
Thank you very much Sir.
You're very welcome!
To be honest, I am a learner sir, loved watching your video, ur good tutor sr I tried making one working bench, it's height had came up to Hip level, ,too high to High for planning wood planks, can you suggest 😅 some ideas
I find the most useful bench height to beif I can lay my hand flat on the bench with my arm straight.
"Scandinavian" style benches (i have a hunch that it is actually a german design that krenov ran across in sweden) atcually used to have a very lose face vice. Basically an overzize clamp built into the bench and much clamping was done in the rear vice. Ripsawing etc
I agree.
Thank you Graham you have added to my repertoire yet again much appreciated.
You're very welcome.
Where is your bench from? It looks very similar to mine (from Switzerland or Germany).
I's made by Ulmia in Schwabia, Germany.
Just picked up your book “Jigs & Fixtures for Handtools”. This video is a good companion to the book.
Thank you!
Very informative. I love the handmade smaller wood devices. Thank you.
You're so welcome!
Most excellent advice and tutorial. Thank you.
Glad it was helpful!
Merry Christmas Graham !
Likewise, stay safe!
Fantastic video, sir! Thanks a bunch! 😊
I just subscribed!
Stay safe there with your family! 🖖😊
Merry Christmas and happy new year!
Happy holidays!
I’m enjoying going through your lessons. You do a good job preparing what you are teaching.
Thanks!
This is a brilliant video, fully of really clever ideas.
Thanks!
Damn missed this one :(
Thank you Master
Looks like you saw it now though...
7:00 ashamed I didn’t think of this one …
Thank you
Hey, I keep discovering things I feel I should have known about.Don't worry.
Great suggestions, new subscriber, I called Santa Cruz home for the 70s and 80s, getting hammered now, making shavings now in NY, small world. Looking forward to interesting things. Thanks.
Welcome aboard!
I'm glad I decided to watch a quick video before I started work.
Very informative. You have explained to me a few things I haven't seen before and I'm happy to have watched your video.
Very professional and easy to follow.
Thanks.
Glad to hear it!
Thank You Graham...Short, simple & very informative. Until next time👍...TM
Glad you enjoyed it
Sticking box.... totally new one on me. I love what you do Mr. Blackburn. Really enjoy your videos. Thank you.
Thanks for watching!
Great information
Thanks!
I bought your book, and could immediately use two tips that I've run into for years. The second book comes today.
Hope you enjoy it!
Great video, thank you so much Graham!
I secure my miter boxes using a dogs.
The only inconvenience is not-so-accurate distance between a dog holes drilled by hand.
Yes, I also often have to use small wedges to make the dogs fit.
Great tips, all. Thank you for sharing. Have a great Holiday and stay safe.🙂🙂
Thank you! You too!
I really like your idea for the pony holdfast. I just figured that I would never really be able to use a holdfast on my workbench because it's not thick enough but after watching this video you showed me that in fact that I actually can. Thank you.
Hopefully more secrets to come - keep watching, thank you
Amazing! Every one of those techniques was new to me. Thanks very much for sharing them.
You're very welcome!
Watching your videos always tends to show me something new. Keep up the nice work! I enjoy viewing them.
Glad to hear it!
It was helpful. Thank you. So many out there talk of the wood work machines, but for those who want to use hand tools where practical your channel is a valuable site.
You're very welcome!
Excellent and helpful video. Thank you.
You're welcome!
❤
thanks!
Great video. Looking forward to learning more from you in June at MASW.
Looking forward to meeting you, too.
Sem palavras, cheguei a me emocionar com tamanha sabedoria, lindo isso. Só uma palavra se resume “ Parabéns “. Top top top
Muit obrigado!
Pekerjaan yang bagus, semoga harimu menyenangkan
Thank you!
Cool advice as always. Merry Christmas.
Thanks, you too!
Great tips. Thanks. Merry Christmas 🎄
Same to you!
All great tips for securing your work peices.
Glad to hear it.
I plan of watching this enough times so that it is ingrained or inbrained into my wood DNA. Thank you!
Great!
Same lol I love watching his videos my son and I enjoy
This video has great ideas! Thanks for sharing.
You are so welcome!
Great information.
Thnks so much!
great tips
Glad you like them!
thank you
You're very welcome
Thanks!
You're welcome!
Thanks!
Welcome!