I used to do this with a rollback for Heartland Buildings in Panama City Florida. We built a spreader bar and it helped a lot. My tips were pretty good as I would literally block them up for the customers as the building hit the ground and save hrs if not days of work for them.
Use a farm jack (Harbor Freight has them , cheap ) to raise building, then set the blocks, use a 2 " pipes between the tilted trailer bed and the 4x4's will roll up really easy ... Can wench the shed up by drilling 5/8 holes Thur the 2 center 4x4's ( drill @ least 5" back from the ends of 4x4's ) using a chain & 5/8 - 4" long carriage bolts ... Use farm jack to raise building enough to pull out pipes ...
Nice! I think it gave me just enough courage to attempt what I know is going to end in disaster all over the highway. Still going to do it though! Thanks!
Is there an ideal length limit on these trucks? I’m building a tiny house on skids that will be moved at some point and would like to make sure it is easy to move for someone.
Tracy K ... Length depends on the truck but you also have to consider the height and width. Anything over 8 ft 6 in wide needs special permits to move and anything over 13 ft 6 in tall (including the truck) will have issues with bridges. Don't forget about low bridges in the area where this may be moved to.
I used to do this with a rollback for Heartland Buildings in Panama City Florida. We built a spreader bar and it helped a lot. My tips were pretty good as I would literally block them up for the customers as the building hit the ground and save hrs if not days of work for them.
here take my money! lol I bet they loved you.
Use a farm jack (Harbor Freight has them , cheap ) to raise building, then set the blocks, use a 2 " pipes between the tilted trailer bed and the 4x4's will roll up really easy ... Can wench the shed up by drilling 5/8 holes Thur the 2 center 4x4's ( drill @ least 5" back from the ends of 4x4's ) using a chain & 5/8 - 4" long carriage bolts ... Use farm jack to raise building enough to pull out pipes ...
Nice! I think it gave me just enough courage to attempt what I know is going to end in disaster all over the highway. Still going to do it though! Thanks!
Did it work?
Awesome sauce 👍
that square body rollback is bad
Do you do this in texas like around princeton
How wide was this?
Ok Im late to the party but if I have a company build me a shed amd then I want put on a trailer...how would that work?
Is there an ideal length limit on these trucks? I’m building a tiny house on skids that will be moved at some point and would like to make sure it is easy to move for someone.
Tracy K ... Length depends on the truck but you also have to consider the height and width. Anything over 8 ft 6 in wide needs special permits to move and anything over 13 ft 6 in tall (including the truck) will have issues with bridges. Don't forget about low bridges in the area where this may be moved to.
Mines a 16' bed
Sine you didn’t support all 4 runners I figured it would damage it. Nice job
Your shed is bigger than my house.
Is the front porch is add on or the its all one piece???
All one piece
Nice job
Why not remove the the two remaining side rails so you could use the rest of the bed?
I leave enough sticking off the trailer so the shed can set on the ground to kinda hold it, which helps when it comes off the bed.
Where are you located need one moved
Nice
That's the way to do it
Where are you located? I might hire you!
Corning NY
Gas tow truck...?
Gas 454
Yes
Camera guy stay in 1 fucking place