Finally a spiral water pump video that provides statistics - thank you - thank you. Obviously more water in the ditch than coming from the pump are multiple pumps being run? Thanks for the comments on the coupling - always my concern.
so, just to confirm......the diameter of the wheel is 6 feet. and it lifts the water 18 feet ? two missing pieces of info: what is the diameter of the pipe attached to the wheel which collects the water? how fast is the stream following?
th-cam.com/video/vpfPDR2VssY/w-d-xo.htmlsi=cBBRHZhcbrTJCp2W In this system the water rises only upto the radius of this spiral wheel, And no continuous flowing. If four opening (A) with 90° spiral hose may will continuous flowing water. Single hose pipe meny spiral no speshal effect and no any compression in this system.
I'm also having problems finding the rotating adapters - some seem to be quite expensive - let's hope we get enough pressure that need one of the expensive ones - but to start - can some link to their favorite products?
Yes - where the rotating pipe meets the fixed pipe - I would also like to know more. I have seen situations where the spinning pipe is extended up the hill, but this seems better and it doesn't look like an expensive coupling. .... and the hub of the wheel that supports the spokes - wonder where to buy the round plates.
8 liters per minute is about 3,000 gallons per day. You have a very nice looking pump and I'm wondering what changes could give more water pumped? You don't seem to be having any trouble turning the wheel even with a fairly slow flowing stream - I wonder would happen if a bigger hose and or scoop was used what would happen. Hopefully we will get into comparisons on facebook.com/groups/240458583255303/ and save us all a lot of trial and error time. I really like the design of your wheel. How did you decide on the number of wraps in the coil?
We fabricated the joints. Yes, there are a lot of coupling on sale but the problem is it might not fit to the designed/desired tube. We used LIP SEAL as gaskets. Can be bought in Auto Supplies Shop.
![[LIVE] : ONE ลุมพินี 86 | คู่เอก "คมเพชร vs ชาติพยัคฆ์"](http://i.ytimg.com/vi/m3q_dRYDuU8/mqdefault.jpg)
Finally a spiral water pump video that provides statistics - thank you - thank you. Obviously more water in the ditch than coming from the pump are multiple pumps being run?
Thanks for the comments on the coupling - always my concern.
Thank you for publishing facts.
Félicitation c'est du bon boulot .
Dom.
За сколько дней можно полить 50 сотых земли?
Один виток сколько метров подымает?
so, just to confirm......the diameter of the wheel is 6 feet. and it lifts the water 18 feet ? two missing pieces of info: what is the diameter of the pipe attached to the wheel which collects the water? how fast is the stream following?
th-cam.com/video/vpfPDR2VssY/w-d-xo.htmlsi=cBBRHZhcbrTJCp2W
In this system the water rises only upto the radius of this spiral wheel, And no continuous flowing. If four opening (A) with 90° spiral hose may will continuous flowing water.
Single hose pipe meny spiral no speshal effect and no any compression in this system.
Sir fabricated po ba yung swivel joint nyo? Wala ako mahanap na swivel joint sa hardware dto tabuk city kalinga.
I'm also having problems finding the rotating adapters - some seem to be quite expensive - let's hope we get enough pressure that need one of the expensive ones - but to start - can some link to their favorite products?
Abd this was our design th-cam.com/video/wf43SKAQwmo/w-d-xo.html
Hi my friend !!! My you help me? How to make it? Thank you so much !!!!!
spinning joints details please..
where i can find or buy that joints?
Yes - where the rotating pipe meets the fixed pipe - I would also like to know more. I have seen situations where the spinning pipe is extended up the hill, but this seems better and it doesn't look like an expensive coupling. .... and the hub of the wheel that supports the spokes - wonder where to buy the round plates.
8 liters per minute is about 3,000 gallons per day. You have a very nice looking pump and I'm wondering what changes could give more water pumped? You don't seem to be having any trouble turning the wheel even with a fairly slow flowing stream - I wonder would happen if a bigger hose and or scoop was used what would happen. Hopefully we will get into comparisons on facebook.com/groups/240458583255303/ and save us all a lot of trial and error time. I really like the design of your wheel. How did you decide on the number of wraps in the coil?
Going to the group!
gud am. sir unsay gamit nimo sa spinning joints?
nagbuhat sad ko ing.ana pero naglisod ko sa joints..
patabang be.. salamat.... reply
Hello sir! Gipabuhat ra namo na sir. Pero naa nay Lip seal sa sulod. Mapalit sa mga auto supplies. Sorry, very late response
pinning joints details please..
where i can find or buy that joints?
+Josep Smaravilla search for "hose rotating adapters", they are many on sale..some are cheap and some expensive ones...
We fabricated the joints. Yes, there are a lot of coupling on sale but the problem is it might not fit to the designed/desired tube. We used LIP SEAL as gaskets. Can be bought in Auto Supplies Shop.
Again, sorry for the very very late response. Haven't check this video in a while
cool CASIO advertising
paps pahingi ng design..