GForce Arms - GF12AR Semi-Automatic Shotgun Firearm Teardown
ฝัง
- เผยแพร่เมื่อ 19 ม.ค. 2021
- Learn how to properly take care of your GF12AR semi-automatic shotgun with Matt of Gforce Arms.
We're rolling out many more videos soon on all our guns. Please consider subscribing and we look forward to interacting with our community - please comment below!
Have Questions? Refer to our FAQs on our site.
gforcearms.com/faqs/
Experiencing Issues and Need Assistance? Our Service Dept. is standing by to help.
gforcearms.com/service
Please visit our website:
www.gforcearms.com/
/ gforcearms
/ gforcearms
I get the tacticool video effects with the Amazon lights in the background and the pallet wood. But if you’re trying to make an assembly video that’s worth posting, light the table, get a white background and a bright shirt. B+ on keeping it interesting by speeding through, A for actually putting a video out, B- on music, B for a couple close ups, D- on explaining the parts, F on set production. Oh, A for being in English.
Well said. Wtf is with the lighting? Why not film in the complete darkness
I agree more closeups more part explanation and most definitely more lighting
Is this gun the same as the GF00? I'm confused?
I would not tear down this gun by following these instructions. This is very poorly filmed with no closeups of the little parts. I wish they would re-do it and follow your tips for the next one.
This is my first gun and am really happy to see a video breaking down the exact gun. Thank you
Thanks for your support and we appreciate your comment. Enjoy!
@@GforceArms i accidently pull out the front takedown pin all the way is there a video on showing how to lock it back in
Is this gun the same as the GF00? I'm confused?
@@jklaws4582have you gotten anymore yet?
Picked mine up last week, Just took it to the range brought 100, 1400 fps 2 3/4 inch target load with me to break it in, Took about 30 rounds to get them to cycle properly, After the 100 rounds i put 1200 fps load in to see if it would shoot and it did indeed shoot flawless after the first 30 rounds, Tried 3 different loads. Did have one malfunction it slam fired not sure exactly what caused it, Other then that great gun. Had a blast after the first 30 rounds.
If you split the receiver and pivot the upper on the front pin, can you see straight through the magazine well? I live in shitty NY and would have to pin the magazine and load it that way. Any help would be appreciated thanks!
Just purchased the GF12AR yesterday 3.27.21. I love it and cant wait to get back to the range. Also, I added a Red Dot Sight and that was also a nice added feature.. Overall, I am very happy with this shotgun and the price was just right... Thank you GForce Arms!!! You Rock!!!
What red dot did you end up using?
Eyeing one of these right now. Seeing a video like this goes a long way to helping me decide to go with this.
Glad to see a video on this guy! Picked it up a few weeks ago and it ran amazing!
Appreciate the comment!!
Just picked one of these up and took it to the range. Works great, cycles buckshot and slugs no problem. Looking forward to more aftermarket support
What kind of ammo? I got some 2 3/4 1350fps. Reading so many weird mixed reviews
Did it shoot slugs out of the box or did you have to modify it or anything?
@@dbrown904904mine shoot straight out the box
Truly excited to get this gun. Just got it. Hopefully I will not have any cycling issues after I break it in. Only going to use for home defense. ✅ very excited. The gun looks amazing
Picking mine up this week! Can’t wait
If you take our the rear pin, and pivot the upper upward on the front pin, can you see through the magazine well Like you would on an ar?
Brought mine out today. Fired flawlessly from the first mag. Outstanding tbh. I also have the cheap pump. These are the two best guns I've owned (so far). Had an old Noble 60 and a mossberg 500 and they outperform both with target load
th-cam.com/play/PLZF-jXyFjq8zHMlYTtM0swjrbwT-hj1Mu.html
This is a moded GF2P 12 gauge pump. The cheap one but I upgraded it for cheap now it's badazz!
How about a video for disassembly of the GF 25.
The instructions in the instruction manual for this model leave a lot to be desired, and it doesn’t even come with a wrench for the barrel nut !
Is the piston supposed to be able to slide up and down when the spring is cocked? Mine does
I just ordered me one of these bad boys last week! Can’t wait!
Hell yes. Thanks for the comment and the support!!
@lordbeavis69 forsure! I may make a video on it since I see none on this specific gun at all on YT
@@hellasketch6523 pls do🙏🏽
I got one earlier this year. Fantastic firearm and dependable. I bought a 20rd drum-mag for it. I went through a 100 rounds without a FTF. I probably could have kept going but didn't. Bravo GForce!
bought one of these a few days ago. its a GREAT gun dispite what haters think. Im very happy with the performance and price. Only problem i have ( not with the weapon ) but any of my red dot sights wont hold zero very long ( they are cheap..) . So the iron sights work well so i cant complain about them. All in all, its a awesome addition to have for home defence or sport shooting or hunting. Thanks for this product.
Thanks for the honest review!! We appreciate your comment.
What red dots aren't working well?
@@aharris87 i have a CVLIFE 1X22X33 RDS that dont hold zero, a UUQ Tactical Holographic and 1 other i cant find atm. The RDS that seems to be holding well is the Tacticon Armament Predator V1 Red/Green Veteran Owned.
@Blasphemy Defined Thanks for the info. I've been eyeing and trying to do research on this firearm. Might just have to buy it and figure out as I go. What's the biggest con you have? Maybe available accessories?
@@aharris87 yea the avaliable accessorites is it, but thats not a huge concern of mine being they are comming according to the site. I do wish it had a adjustable stock on it. But all in all i really enjoy it. No problems at all for me.
been waiting for this
Glad to hear it, more coming soon!!
Looks like I'll need to get my PHD for this surgical procedure.
Just ordered the GFY-1 today. Can't wait for that sweet looking bullpup to arrive! When will we get the GFY-1 Teardown video?
We're working on it. Please stay tuned and consider subscribing. Thanks for the comment and support!!
Hey turn the lights on man,trying to watch the assembly process in the dark!.
I got this today. It said it had another magazine with it but I only got the one in the gun. Unconcerned with that. It takes the popular semi auto shotgun magazines I can find used somewhere. I’m more happy that it came with the chokes. Just an inconspicuous cardboard box with GF arms logo on it and the gun wrapped its plastic of course and a case included with two chokes. Got it online for 229$ total. Will break in sometime. Thanks
This took long enough lol!! I love mine! Let that baby loose last week at the range. I’m a true fan!!!
Glad to hear, thanks for your comment. We're working on more, coming soon!!
@@GforceArms And I’ll be buying! Your pump action is next on my list!
@@tecoshaw2502 Appreciate your support! Would love a review on our Facebook page if you have time to spare. Have a good day!!
@@GforceArms Absolutely!!!
I’m thinking about purchasing one is the butt stock removable or collapse
I picked one up a few weeks ago, nice shotgun
Thanks for the kind words!!
@@GforceArms when I got my ar12 I did not receive one of those tools to push out the rear pins, is that a special tool I need or can I use something ordinary
@@Ngc-ve7tb The rear pin can be pushed out with a basic punch tool.
@@GforceArms okay thanks guys that's what I figured I haven't messed with it yet have a great day and be safe
Just got mine its a great rifle definitely recommending to all my gun friends
I just got one and this thing it's a fu#&ing monster!
Are your shells getting stuck when ejecting? You appreciate this gun the most if you use shells that have lubricating agents within the raw plastic. STS, AA and Federal Gold Medals. I use those shells only and have 0 cycling problems.
A few of these types were on sale this month, of them, i chose this model on the dissassembly. Less tools needed, one model had a piston -o- ring i didnt care for, not saying its a bad thing, but i work on cars for a living and i know how to break and lose small parts like o rings. If you work on fords this probably wont bother you. Looks like a lotta fun, cant wait till it comes in. Anybody know if this comes with chokes?
The choke is Benelli/Beretta style. No more constricted than full choke. M 1919 type magazines. Replace the flip up sights with a quality brand. The gas pistons depend on your loads. Over 1500 fps need the heavy piston according to the people I've talked to. The stock and lower are 1 piece molded. I'd like to see a different front grip with key mod or rail options. And a way to install an adjustable stock. Overall a good weapon. It takes a break in period of getting used to what piston to use with what ammo. Learn your weapon..Learn your ammo..Know your use
Thank you for your comments and thoughts. Appreciate your honest review. More coming soon, stay tuned.
I edited my original post. It's a M 1919 magazine. My typo error sorry folks. Most gun sights have 10 round mags. 20 round mags too. And FYI the original 5 round mags you can slide them bottom up on the short rail on the front grip. It is really as simple to tear down as the video. Enjoy your toys boys
We need a model GF00 tear down PLEASE!
I'm trying to figure out if the Barrel is actually treaded to add on a Muzzle or not looks it but unsure, hopefully gonna buy one of these tomorrow????
If you split the receiver and pivot the upper on the front pin, can you see straight through the magazine well?
I discovered a trick for those of you with a brand new AR12 that will not cycle without jamming. Just store the gun with the receiver open (locked back) and Max load your magazines. After storing my gun like this for 30 days- it runs (high brass) like a well oiled machine.
Can you do a GFY-1 Bullpup video next? I just purchased one last weekend.
We've got it in our pipeline! Stay tuned for it soon. Thanks for the comment and the support!!
That would be great Just bought one also...
Is the GFY-1 a Black Aces fd-12 bullpup clone? They look remarkably alike.
@@tac0008 Not the same, no.
Bought the gun last week price was decent. It shoot great at the range shoot everything except mini. I'm a Dan now dont let the hater persuasive you otherwise.
Fan*
@@SonPham-wl2fu Glad to have you on board, Son. Thanks for the support. We don't recommend the use of mini-shells.
Is there a disassembly video for the GF00S? That's what mine is and the instructions it came with are for the one in this video which is slightly different
The GF00 will have its own teardown video, it'll be out soon. Thanks for your patience.
Wow that's a lot to take apart
Good stuff guys! Was able to grab a GF12AR this week and loving every bit of it. Do you guys recommend any companies or brands to swap out the buttstock for an adjustable one? Thank you
Thank you much for the kind words. There are not adjustable buttstocks available for the GF12AR, but we are working on accessories, that being one of them. We will tentatively come out with that sometime in 2021.
@@GforceArms thats a epic fail 😑
They are a new company ,give them a chance
How well does it work? I’m looking at buying one
@@aaronfox5559 it works well lower recoil
Do it again and turn the lights on
I keep hearing that the tool used to loosen the barrel nut should be included with the gun when purchased but I didn't have one when I bought mine. Is there anyway I can buy one separately?
Just got it a few days ago and already put 100 rounds through it but when attempting to disassemble it the included wrench tool stripped the noches on the screw so I’m not able to take out the bolt assembly so 6/10 for me
the factory does not recommend you remove it, it is medicated glue
Not sure it matters but heat the barrel nut up with a heat gun and use a vice and take a punch and hammer to each notch until you slowly turn it loose, then apply for a free one with the warrenty
I got the GF-25 but the booklet is not right on how to break down the upper from the lower. I still cant do it and even a smith was stumped.
Cannot remove the rear pin that lol the upper and lower together. It seems to have some sort of spring clip and it won't budge. I'm afraid that if I keep trying ill damage it
Can we get the gf00 breakdown at some point? It's been out for awhile and you responded months ago you'd have one out shortly.
We had an issue with our specialist, and are having difficulty finding a replacement. We appreciate your patience! :-)
All those tighten up just pft, or do they need to get torqued down
Do the gf25 teardown the same way this one
Is there anything else I can use to loosen the barrel nut? The three prong tool given doesn’t loosen it 🙏
Is the piston supposed to lock in place, or will it slid if you have the bolt locked back?
Just recently purchased this gun. What tool did you use to loosen the barrel nut at 2:00?
I cannot get that barrel cover off. I don't want to go at it with pliers but I may have to. Any hints?
Just picked it up and went to do a field strip for the first time to clean out the barrel and make sure everything is lubed up and the barrel Nutt won't come off. Stripped 3 noches from using the supplied wrench. Then used vice grips and a malet with no luck. Applied light heat to it and went back at it with the vise grips and malet still nothing. Yes I was going counter clockwise and the wrench was in the correct orientation. Haven't shot it yet but I can say that the manufacturer over tightened the barrel nutt. Anyone else have this problem and a solution? Very frustrating!
Picked mine up about a week ago, When I shoot slugs through it the bolt rides back past the bolt release and gets stuck back there. I have to hit the slide with something to get it to release. Very odd and inconvenient.
Anybody have an explanation or fix for this?
Can you please do a video on the GFY-1 I got mine the other day and would love to see a breakdown video on it!! Please!! I want to shoot it so bad but I need to clean it first
It's on its way, thanks for the comment. Please consider subscribing if you aren't already to be in-the-know when it goes live.
How do you pull out the lower reciever takedown pins?
You should do a video for the GFY-1
We're working on it. Consider subscribing to get a notification when it goes live. Thanks for your comment.
GF 00 is not the same takedown process. Not sure how to get it open.
When can we expect more accessories for the gf00?
Mags drums and grips ect
Aftermarket parts are tentatively releasing in 2021. Thank you for your patience.
Just picked up the MKX-3 today, I bought 2 of them, can you tell me how to install the muzzle break it came with, thanks for the video
Remove the choke tube with the removel tool that is located in the box of choke tubes and install break by hand, I also used a small piece of rubber and chanellock pliers to make sure that it was good and tight
@@solardozer1 thanks brotha, do you have to take the barrel collar off
Hi I cannot get the charging handle to come out of my gforce12 shotgun. The weapon is new, and I am afraid of stripping it. What can I do to get it loose?
So trying to break mine down for cleaning and there is no chance this tool is getting the barrel nut off of mine. The things dam near welded.
I have this. But i just want to know how to take it apart juuuust enough to clean it an oil it not completely disassemble it to the point where im trying to see how it was put together bruh.😢
Why does this weapon's barrel nut have a traditional right-hand thread but the bullpup's has a left-hand thread?
have 2 questions, planning on storing mkx3 in a safe built into the back of an SUV. It will be in close proximity to a 12'" Alpine sub in a ported box that hits almost just as hard. Should I be worried about vibration affecting said firearm? Secondly, does the mkx3 cycle more easily (with less chance of a jam) when loaded with "high" brass?
Hi. Not sure about the vibration of the sub, but it should be fine. Heck, if it can handle 12GA power, it can handle a sub. Also, works much better with high brass shells (velocity over 1300 FPS) for reliable cycling.
@@GforceArms good point, thanks guys!
Can you plz do a field review for this also, contemplating on buying.
It's in our queue, thanks for the comment!
Yes Please same Here !
Any optics you recommend? Everything I have with common picatinny doesn’t fit, all too loose.
Holosun Optics, Red Dot, perfect fit - Model HS403B
I have a Gf12ar Do I need a tool to get that back take down pin out
I got a GF12 AR a few weeks ago. Finally got to put some round thru it this weekend. It shot really well and the recoil was nice and smooth. The only question I have is mine did not come with an extra piston. Should there have been 2 in the box?
Yes mine came with 2 , a lite load and a heavy load piston
Please fill out our service form and we'll get back to you ASAP on this matter. Fill out the ticket just as you've commented here so our service team knows the situation. Thanks for the kind words, we hope to get this resolved for you. www.gforcearms.com/service
@@GforceArms Thanks! Will do!
Yes, I didn’t get a second piston. Just noticed that today when I went back into the box.
@@shootitraw6989 Be sure and fill out the form and we will get back to you about this. Thanks!! www.gforcearms.com/service
Are these compatible with other parts from panzer or rock island? Like drums, stocks, grips ect
Unfortunately, no.
Just got one of these holy shit
I can’t get off the barrel nut it’s sooo tight idk what to do
Is this compatible with any other upper?
How well do they run using low brass ammo such as clay and field shot? Is there a noticeable change in cycle rate
We recommend using 1300FPS or higher velocity ammunition in our firearms.
Got mine today headed to the range in the am
Let us know your thoughts and consider writing us a review on Facebook. Thank you.
I took It to the range and it wouldn't eject the 2 3/4 target loads I also tried high brass double OO buck and still wouldn't eject. Is there any ideas on the issue or should I try a heavier load?
@@teztez6518 We recommend using 1300FPS or higher velocity ammunition.
I will definitely try that out and send my response. I dont have a fb but I will get the review posted in the comment section
@@teztez6518 It's a common issue. We are confident it'll be a much more enjoyable experience. Thanks for the follow-up.
1. is there any way to add an adjustable stock?
2. Any way to add some rail section under the handgaurd?
We're working hard on developing aftermarket parts for our firearms, not available this moment. We appreciate your interest and patience!
Anyone got a part number for the tool referenced about 2 minutes in?
Is this the same as the g25
Are the mags proprietary or are they compatible with others on the market. Picking one up tomorrow but you can't have enough mags
Thanks for your comment. You can use other mags, they are specific models but no they are not proprietary.
So what other brands of mags will work in the firearm? I just bought one of these and am looking forward to getting it in.
Good video but the lightning could be better
Does this only shoot 3” shells or will it take 2 3/4 as well?
Hi thanks for the comment. Yes, you can shoot both 2 ¾” and 3” shells from your shotgun. We do not recommend the use of mini-shells. See our other FAQs here: www.gforcearms.com/faqs
The barrel nut on mine refuses to loosen up and come off.
Would you shoot sabot slugs or rifled slugs out of this? Also, do slugs shoot fine with the choke that comes with it?
Rifled slugs. We recommend shooting slugs with only a CYL or IMP CYL choke. That gun comes with a MOD choke, so no. The choke system is Benelli Mobil choke compatible.
How much different is the lower from an AR-10? any parts that are swappable? trigger etc?
Unfortunately, no parts are swappable.
What’s the best ammo to use??
Is this gun the same as the GF00? I'm confused?
I just bought mine an only have 6 shells through it an it jams every other shot an iv read up that it has problems with the gas system how do I fix this
We recommend using 1300FPS or higher velocity ammunition in our shotguns.
Need a vid on the gf00s version
It's in the plan!! Thanks for the comment. :)
When did this gun come out?
how come yall dont have a video to take apart the gf00s the manual on the gun doesn’t even show it ether and cant find it online ether like the gun was erased from the earth
I just picked mine up what after market mags fit for this gun
Our magazine fed shotguns are MKA 1919 magazine compatible.
what is the forward most lever for on the left side of the receiver?
looks like a takedown lever.
This gun looks a little littletoo long....it would look so much better if it had shorter barrel..is there aftermarket barrel made for this gun???
What would you reccomend using the heavy load piston for?
There are many opinions on what a “heavy” load is. Some define it as the weight/size of the ball inside…6 and above being standard load and below 6 being HEAVY load. Others consider it a defining line between 2 ¾ inch as STANDARD load and 3 inch as HEAVY load.
Finally, another opinion is that of the amount of powder charge. If you follow one of these, you’re probably ok.
Read all our FAQs here: gforcearms.com/faqs
Would these be able to shoot a 2 3/4 or 3 inch slug and would you personally consider that a heavy load? I ask because i like slugs more than other types of loads.
@@jefflane7507 Slugs 2 3/4" or 3" would be considered a heavy load, we would say.
Forgive my ignorance but I'm teaching myself, what's the point of the heavy load piston?
There are many opinions on what a “heavy” load is. Some define it as the weight/size of the ball inside…6 and above being standard load and below 6 being HEAVY load. Others consider it a defining line between 2 ¾ inch as STANDARD load and 3 inch as HEAVY load.
Finally, another opinion is that of the amount of powder charge. If you follow one of these, you’re probably ok.
Is it bad to keep magazines loaded with shells? will they warp?
A good quality magazine can stay loaded for years and function flawlessly.
HEY YO WHAT HAPPENS IF THE BARREL NOT IS JUST FUCKING STUCK AND WONT COME OFF? ITS ALMOST LIKE ITS GLUED TO THE GUN. NOT SURE ITS SUPPOSED TO BE LIKE THAT.
Hello after shooting it at the range I came home and the forearm grip is wobbling slightly and isn’t tight. Is there a way I can re tighten it?
Please send us an email using the Service form on our website and we'd happy to look into this for you! www.gforcearms.com/faqs
@@GforceArms I fixed it. All I had to do was re screw the barrel cap into place
@@JohnSmith-ii9cu Awesome, thanks for the update. Cheers!
Can't see a thing with the dark lighting.
working on a Gforce Arms MKX3 video?
Hi thanks for the comment, Tanker. It'll be out soon!! Cheers.
I bought one couple days ago....but I’m having this problem that when ejecting shells they get stuck in the camber...??? What can I do
Sorry to hear you're having difficulties and thanks for your comment. We recommend using 1300FPS or higher velocity ammunition.
@@GforceArms I’ve shot 1320 shells and they still get stuck
@@Erick-tg4vn Please fill out our service form and our Service Dept would be happy to help. www.gforcearms.com/service
Маю проблему не викидає гільги , можливо проблема з патронами, скільки грам має мати патрон , шоб механізм не давав відсічок, взагалі відсічки на магазинному дробовику не буже приємна річ
I just bought one of these and after 22 shots it won’t fire any shells. Not sure what went wrong with it.
Try cleaning it
Can we install a binary trigger on this ??
Looking at purchasing one of these for defense and also cause I'm a big shotgun guy. How's reliability? Anyone who has purchased one any big problems with them yet?
Mines not cycling properly it jams
We're sorry to hear about your jams and cycling issues. We recommend using only 1300FPS or higher velocity ammunition in our shotguns.