I am thrilled to have found your channel. I'm an old lady who still likes to do things myself on my odyssey that I use for an uber/ lyft. I recently backed into a "Pittsburgh Pothole" and knocked my rocker panel cover off on the driver side. But the ends were still attached. This video was just what I needed to finish removing it and replace it! Thanks for saving me a couple hundred dollars!
My 2011 Odyssey rocker panel will not budge. Been pounding on it for an hour. I've flexed the rear end of it back and can see it "should" slide forward but something is holding it in place. I've removed all the screws. ??
No, because the clips are directional, it can only come off from being slid to the side. The clips are surprisingly strong, but I suppose if someone was 800 lbs and stepped on it you may run into some issues.
I am thrilled to have found your channel.
I'm an old lady who still likes to do things myself on my odyssey that I use for an uber/ lyft.
I recently backed into a "Pittsburgh Pothole" and knocked my rocker panel cover off on the driver side. But the ends were still attached. This video was just what I needed to finish removing it and replace it!
Thanks for saving me a couple hundred dollars!
I've also saved a lot of money replacing my own bulbs and wiper blades👍🏼
I just used this video to figure out how to re-install the rocker moulding. This video helped out a lot. Thank you!
Thanks man. Your video helped me out a lot.
Wasn't expecting a video for this. Really appreciated
So happy to have found this!
Sweet ride and video! Thanks for sharing!
where i can buy it? any part number for this rocker molding please!!!!!! @DIYHonda
Thanks for sharing!
Thanks for the video! Super helpful. My rocker molding came loose and several of the retaining clips are missing - any idea where to get replacements?
I googled mine think I got them on ebay
@@4sp3nF41r7 can u provide the link? I need them too
My 2011 Odyssey rocker panel will not budge. Been pounding on it for an hour. I've flexed the rear end of it back and can see it "should" slide forward but something is holding it in place. I've removed all the screws. ??
Are you pushing it in the right direction?
@@DIYHonda Yes, striking it from the rear, attempting to push it towards the front of the vehicle. It is stuck solid.
Como puedo conseguir esta parte?
Your local Honda dealer can order one.
Trae la Honda 2002 instalada la moldura de la misma manera que está
👍🏼
Can this molding get pulled off if people think it is a step and put their weight on it? Seems like a questionable design.
No, because the clips are directional, it can only come off from being slid to the side. The clips are surprisingly strong, but I suppose if someone was 800 lbs and stepped on it you may run into some issues.
you should be able to slide the molding back on without removing all the clips
I got my screws out, but I can't get my molding to slide. Ughh
Did not work for my 2011
My molding is not like that.its a 2011