Good vid, looked up as I need to repoint my garage roof. Looks v awkward filming and doing it all up a ladder lol, appreciate the info. Deffo feel like I can tackle the job now, cheers 👍
.....another little tip gonna pack any gaps with wire wool mesh as i repoint for any future rat prevention entry points too! just learning! Thank you....
@@markrocketmangrimstead 😂😂😅scared of going up ladder ! I asked someone to do it last September and they just haven’t showed up . I have damp coming into bedroom
All the verge tiles and end ridge would have been better taken off. for the under-cloak tiles, would have been better replacing with undercloak board. Neater and better finish. Run a high line of mortar right up the verge and press the verge tiles back into place. Will bond better and stop lifting in high winds. I don’t really like the idea of packing out the gap with lumps of mortar. But I think I’m quite ocd and would annoy being knowing it’s their 😂
i have some small cracks in this " gable end verge ". there is always some water dropping from the end , where gable end finishes. i don t know what that portion of roof is called.
Hi mate,i just replaced the original peg concrete tiles, in the past i have used cement fibre board or even old 3mm aluminium sheet with i cut into strips, to save money
I just wanted to know what this involved. Thank you so much for sharing this. Great video.
Thank you if you persevere anything is possible, try a small bit then work your way up
Brilliant, just what I was looking for, cheers!
Thanks mate,dont finish it in the dark like me👍
Good vid thanks .....I’ll be adopting your techniques for the small pitch gable end on my porch 👏
Thankyou, yes give it a go
Good vid, looked up as I need to repoint my garage roof. Looks v awkward filming and doing it all up a ladder lol, appreciate the info. Deffo feel like I can tackle the job now, cheers 👍
Yep i say give it a go ,just take your time, practice makes perfect
Great video. that’ll set me up perfect for replacing my gables in summer 👍
Thanks mate
I've just got to pluck up the courage to have a go now! No excuses!
Go for it,👍
.....another little tip gonna pack any gaps with wire wool mesh as i repoint for any future rat prevention entry points too! just learning! Thank you....
👌
Good work you should get a small electric cement mixer and stand be able to tip straight into wheel Barrow
Thankyou, yes i have a electric mixer,but i only use it for larger quantities, small stuff i usually do it by hand.👍
What we do in Australia. Is that we put cement sheet on top of the wooden fascia board and 5ml in so the mortar would not make fascia wood rotten..
Cool,yes i have done that before.its just that i am to tght so i reused the tiles👍
I need a repair of this, I wish I could find someone like you near me who knows what they’re doing
Jane, have a go yourself, go for it
@@markrocketmangrimstead 😂😂😅scared of going up ladder ! I asked someone to do it last September and they just haven’t showed up . I have damp coming into bedroom
@@jane-fw4nh I hope you get it fixed jane👍
All the verge tiles and end ridge would have been better taken off. for the under-cloak tiles, would have been better replacing with undercloak board. Neater and better finish.
Run a high line of mortar right up the verge and press the verge tiles back into place. Will bond better and stop lifting in high winds. I don’t really like the idea of packing out the gap with lumps of mortar. But I think I’m quite ocd and would annoy being knowing it’s their 😂
Yes you are correct, but the problem is i am a cheap skate,so in other words im trying to be economic 🤣
What is under cloak board? Is it just any wood boards?
Brilliant video, so informative. 👌
Appreciate your comments, cheers👍
Yes mate, thanks for this!!
Awesome 👍
i have some small cracks in this " gable end verge ". there is always some water dropping from the end , where gable end finishes. i don t know what that portion of roof is called.
Im not sure either, you could try to repair just that portion,to make it less prone to cracking you could put chicken wire in before the mortar
Where you put the tiles could you of used undercloak
Hi mate,i just replaced the original peg concrete tiles, in the past i have used cement fibre board or even old 3mm aluminium sheet with i cut into strips, to save money
@@markrocketmangrimstead ive got a gable end to do.
all the cement is falling out and undercook breaking off and hanging down
Hi Nice video I need to do mine it's right at bottom of gable looks like can be done of ladder thought was have to get a tower scaffold.
Just be careful and take your time
You got the mix right but should be 2 building sand one sharp one dust
Cool👍
Good video man . ... Something I've gotta do at some point in the future .
Thanks mate,go for it
@@markrocketmangrimstead Luckily I've a friend who's a builder who is more skilled with a trowel . I guess I could do the laboring ..
👍
dry verge its the way forward maintenance free .
Are they universal and i guess no need to remove the old mortar ?
You would need to remove all the mortar and extend the tile lath.
@@wingmainful yes indeed you would steve correct nice hear somebody that knows what there doing .
Had to fkn roofers do my roof did a horrible job I better do it my self then
Yes you will save yourself a lot of money and also if you are determined do a better job than these so called professionals.
Practice makes perfect