Maybe, just maybe, if you were in a life or death situation, no socket adapter, and you had to drive in hundreds of these bolts or you were gonna be unalived, it’s acceptable to do this. But for just one or two, just use a wrench/ratchet of you don’t have a socket adapter
If that's not a locking nut and you can't screw it in by hand, you've threaded it. Also, by the time you finished dicking around, you could have already ratcheted it in.
Se puede usar de cualquier manera, pero todo depende de…. El dinero que tengas para comprar la herramienta, ahora que si ya la tienes, eso es otra cosa.
Пока он делает эту приблуду я закручу накидным ключом, если идёт речь о большом количестве болтов, но при этом есть гайкоаерт и набор головок , то зачем мне эта приблуда ?
This is a half-decent solution to an imaginary problem. I'll keep it in mind but it's the worst possible example because you can screw that in with your fingers.
Im literally about to throw my phone at a wall and its your fault
😊8з
Ты псих😅
Same thoughts
Открыл Америку.
Please do. And please, never buy another one.
This should be called "When you get paid by the hour"
But if you get paid by the hour should you not want to go slower?
At least they have a job. And remember, sweeping up the Walmart parking lot really isn't a job.
@@nothankyou5524brave of you to remind yourself
@@nothankyou5524it's a job if you get paid 🐔💆👳
They literally make a drill socket attachment.
I’ll spin that shit by hand faster than making one of those😂. Get a socket drill adapter
Here here
This video is for the 3 people in the US who have not bought that $3.99 set of 3 different sizes at Harbor Freight...
Do that with my 1/4 inch extension on my cordless drill. With an 8 mm socket.
@@burt1758Now thats definitely one i'd like to see. 😂
В каждом НОРМАЛЬНОМ наборе головок есть переходник под гайковерт.
В том то и дело, что под гайковерт. Этот же мегамозг хочет угондошить шурик
Maybe, just maybe, if you were in a life or death situation, no socket adapter, and you had to drive in hundreds of these bolts or you were gonna be unalived, it’s acceptable to do this. But for just one or two, just use a wrench/ratchet of you don’t have a socket adapter
By that time your bolt could be all the way in with a good ole thing I like to call fingers
Yeah but usually you do not have only one bolt so if you have too many of them it makes sense
@@einlehrlingdawg, you gotta be the slowest person on earth
@@saipai8114 if you have like 200 bolts every second counts
@einlehrling if you have 200 bolts you can afford a drill adapter
@@saipai8114 if you come to a construction site and forgot your drill adapter this is a solution
May god help the younger generations
its getting really bad now.
I'm about to turn 24, I'm not claiming this.
А потом думать как разобрать, когда резьба на болте "умрет":)
Omg .. give it a rest
Ле.вым метчик
О
м
great way to save one dollar 😂😂
If you have a masonary bit and inserts, im pretty sure youd have socket adapter. Prob a dollar at harbor freight
I’d rather use a wrench than recreate the power rangers megazord sequence
Руку свернёт разок, такие мысли сразу перестанут в голову лезть
I don’t think the extra was needed for something so simple but I guess I was cool 😅😅😅😊
I go raid the local hardware store for bargain bin specials. If it breaks, oh well!
This guy's brain is the equivalent of buying a loaf of bread.... But it's all just the end pieces.
Where were you about 30 years ago when someone cane up with an adapter to do such a job 😮
All This with his toes..!!! Incredible..!
Imagine it.
I have a whole set of sockets for use with my cordless drills. I’ve had them for 25 years.
Существуют адаптеры для шуруповерта под квадрат на 1/2, 3/8 и 1/4
Three hours later, after inventing a new invention, he could’ve tightened that bolt up with the wrenches he already had
My ratchet set literally has adapters exactly for this purpose
Or just get a square drive drill adapter - if you have sockets, you've probably got one !
Верните 30 секунд моей жизни обратно. Купить насадку на шурик за копейки и не делать себе мозг.
Well somebody ain't never heard of an adapter, now in 1/4. 3/8. And 1/2. At your local hardware store
I'm not going to lie. Never thought of that.. Amazing!!
In a pinch sure good idea
They have adaptors
Dude you’re DAF
Переходник с квадрата на шестигранник лёжа плачет в стороне
You know they sell impact driver bits that you can use in your drill right
That random sound effect
All the time it took to put that together a wrench would have done the trick.
This reminds me of when my autistic cousin found windows movie maker on my old laptop.
공구는 용도에 맞게 써야됩니다 복스소켓에 볼트체결해서
드릴로 볼트를 조이게되면 볼트가 꽉조여지지않아요 드릴은 볼트 조이는 공구가 아닙니다 피스박거나 구멍뚫고 탭가공하는 공구입니다 임팩드라이버보다 토크가 많이 약합니다 볼트를 꽉 조이시려면 그리고 쉽고 빠르게 조이시려면 임팩트드라이버를 사용하셔야지요
저렇게 볼트를 복스소켓에 끼워사용하시면 드릴척에 물려있는 나사산이 망가지면 복스소겟에 조여진 너트풀기가 어려워져서 볼트를 비틀어 부러뜨려야하거나 그라인더로 잘라야 될겁니다
볼트를 적은힘으로 빠르게 아주많은 다량의 볼트를 체결할때는 조금이나마 도움 되겠지만 그게 아닌 상황이라면 이영상처럼 하시는건 도움 안될겁니다 하지마세요 드릴척에 기스나고 좋지 않습니다
didnt know my phone had a calculator all this time
Sound effects made it great !🤣😆🤗😏
If that's not a locking nut and you can't screw it in by hand, you've threaded it. Also, by the time you finished dicking around, you could have already ratcheted it in.
Thus is genius! Cant wait to try it.
Se puede usar de cualquier manera, pero todo depende de…. El dinero que tengas para comprar la herramienta, ahora que si ya la tienes, eso es otra cosa.
Пока он делает эту приблуду я закручу накидным ключом, если идёт речь о большом количестве болтов, но при этом есть гайкоаерт и набор головок , то зачем мне эта приблуда ?
time to setup > just tightening the bolt
Для тех кто хочет осложнить свою работу.
Are you the first generation of your family to walk upright? 🦍
That bolt is to long for that socket to work like that
Socket would have worked just as well
Fire the sound and editing guy
Ну да зачем трещетка когда есть шуруповёрт с поломанным патроном.
there comes a time when do not recommend channel is the option.
А не проще купить оснастку для шуруповерта?🤦♂️
This Short feels like it's ten hours long.
Wow. That's a lot of extra steps.
grind the bolt a square head to fit all sockets. save you time tightening
Что вам мешало использовать переходник из набора головок?
Turned the wrong way with rachet. This is fake
I would have screwed it in with my fingers by the time this demonstration was done.
So you ruin your drill chuck, and the bolt, to save three seconds, is it really worth it?
что я сейчас посмотрел, извините меня но это глупо
みんな工具について触れるけど、そもそもこんなところにこんなに長いボルトを打ち込む意味を知りたい😂
Так можно было и гайковертом это сделать.
Or just use an adapter that comes with the sockets and stop wasting the customers time.
зачем усложнять жизнь, за это время можно было рукой закрутить и потом трещеткой дотянуть
Or just have a 3/8 bit into 1/4in for a drill
250 полуляхов из 250😂
Get a 3/8 drill driver
I am now dumber for watching that. ..
GUYS stop reacting to this about it being wrong, it is what they want
Для этого вообще то есть переходник 1/2 на шестигранник .
А по хорошему гайковерт.
Where's khaby Lame when you need him🤦🏿♂️
Wait hold on! What if you just used the right tool for the job ?
...or you spend six quarters and buy the drill attachment for sockets at harbor freight or nine quarters at HD or Lo's.
А гайковёрт (чем-то напоминает старинный коловорот) из этого же набора не канает? 6))
That's not an electric screwdriver, it's an BATTERY POWERED DRILL ,DRIVER
Or just get an impact wrench or driver
А можно я сразу головку в шурик воткну, и не буду херней страдать?
You are badass kickass sir.
Did you literally just cut the shape of a hex in the material and glue in a bolt as a form of fixing point?
A hexagon with a thread filled with special epoxy resin is inserted into the block.
Shorts is turning into a joke but not the funny kind
For HALF THE PRICE you could get the RIGHT TOOL FIR THE JOB!!!!!!
This is a half-decent solution to an imaginary problem. I'll keep it in mind but it's the worst possible example because you can screw that in with your fingers.
Бита и переходники для шурика: ну да ну да пошли мы нахер...
Uhhhh they make something called an "impact wrench" look it up 😂
Und schön das Bohrfutter kaputt machen mit dem Gewinde 😂😂😂
Sos un genio , la NASA te espera !!!
For once I thought is it possible I'm going to see something useful? Nope.
U telling me for 40yrs---
그냥 작업을 빨리 하기 위해선 임팩트드라이버를 사용해라잖아
Uhhhhhhhhhhhhh insert the “what the fuck guy”
Wtf did i just watch
I have a drill bit for that.
By the time you set that up. Ive got that bolt in. Next?
They make cheap adaptors for that
Breh. See the socket. Get the adapter. Why reinvent the wheel with a bolt and nut. Just get the right damn tool.
All of those tools could have worked just fine
be a sigma…use pneumatic wrench
Автор, ты кому лапшу на уши вешаешь, там болт в гайке телипается, как карандаш в ведре, руками крутить можно, а ты городишь дичь...
You’ve got some seriously Harry fingers
И хана головке т.к зажим шурика слижет всю резьбу и он банально не сможет всю эту конструкцию разобрать
....when you get paid per bolt...
Нет ну реально, что за хрень? годных видосов, советов больше нет
И вертел бы ключом дальше