ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- In this video, I'll show you how to program your 2015-2019 Ford Transit 350 key fob using the Autel IM608 scanner. This is a quick and easy process that will help you get your key fob get programmed to lock the doors when you leave.
If you're looking to replace your key fob or just need to program your key fob, then you should watch this video! By following the steps in this video, you'll be able to program your key fob in no time at all!
Check out my social media!!!!!
Snapchat- / javin
facebook- / regzastar
Insta- / nietojavi
Tiktok-www.tiktok.com...
=====================================================================
Hi guys welcome to my channel i have been working on cars my whole life and now that i have accumulated tons of experience and knowledge i want to share it with you.
I upload new videos every week stay tuned!!!!
Thanks for watching, please like and subscribe and god bless you!!
Disclaimer: JVFIX assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. These videos are only for educational purposes and i am not responsible for ANY INJURIES OR ACCIDENTS, DO IT AT YOUR OWN RISK!!!
Helped for me withoit a scanner. Turned the key 4 times and pressed a button on the key fob and it worked. Thank you
no problem
@@JVFIXLLC however my 2 new keys work then my original doesnt. Then i redo to process and the original works and 1 new key work. The second new key doesnt work. For me only 2 keys can work
Thanks for the video, FYI today I did a 2019 Ford Transit, all the procedure were the same except instead of 4 times needed 8 times to go through programming mode, even IM608 says 4 times.
yea ford all ford to program key fob is 8 times. thanks for visiting
Works with out scanner, thank you!
no problem
Very helpful info. Appreciate u
no problem, thanks for checking out the video
Question. I have a key fob for my 2019 transit 150 it's already been cut, do I need scanner to program the key fob? Or I can just turd the key in and turn it until I hear beep. Thanks in advance
Yes you can do the manual procedure opening the switch eight times quick
Pretty good video definitely helped us out. except when we programmed our new key, it unprogrammed our other two keys lol so now we’re trying the whole process over again.
yea on most cars will require all fobs present to be programed at once. thanks for watching
@@JVFIXLLC yeah my mistake was not pushing the buttons on the other fobs. Each one needs to be pressed when reprogramming. And on this model for some reason I couldn’t use the Autel so I tried going on and off more than four times, somewhere between five and eight and then it worked. Got them all working though. Thanks for the knowledge!
I've got 2 new transponder chips for a 2008 mk 7 transit and I need to programme my spare key up for my 2016 mk8 transit custom. Is it the same transponder chip for both vehicles...is the transponder chip off a mk7 transit the same asa mk8 transit custom...if anyone could help...thanks
the chips are not the same you need to buy the right ones for the 2016
Thank you
thanks for watching
Thank u
thanks for watching
This is how my van has been stolen!!!!!!
and that's why i put a tracker on my cars
@@JVFIXLLC they can scan the tracker also some one found the tracker only where the van was.
The thing is the police didn't bother to come when my neighbour call them while witnessed the man stealing the van... all they said was ref no .and to call the insurance. .