Visit DRO Pros for more in depth installation vids. www.dropros.com/ Attn: trolling contest is closed and we have declared a winner! Congrats to Skip Tracer!
The more I watch these videos the more I realize how much I need a milling machine. With a lathe and milling machine there's really not much more to be had. I have a nice metal bandsaw and drill press but so much more can be done with a milling machine. Great video btw. Appreciate anyone that takes time out of their day to show their process and give us new ideas.
Stan - When you started to lay out the parts for the cross-slide (~ 8:00), you started to point out the fit issues which have kept me from installing a DRO on my 12x36 Logan. I'm frequently up as tight as I can go against the chuck as well as the issues with the short tailstock quill which you've pointed out. The scale and read-head simply require that the cross-slide be too far back from the chuck for many of the operations which I perform. For now, I set up a dial indicator as best I can, and work from that. Cheers, Eric
Thanks Stan, I have had good luck with Dro-Pros units I have 4 of them in my shop and have never had any problems that wasn't self induced!!!!! and nothing that wasn't easily fixed. I did not go three axis on the lathes, but sometimes which I had. I did the same as you even after checking myself a couple of times, birthdays are hell on eyes, ears, and keeping things straight. Aloha
Hahaha... Stan.. You described so well to keep the Head and the Scale aligned with the marks.. and ... Oooops... Now the Crap screws has to come out that you can swap it around.. Maybe opportune time to replace with stainless cap head screws...
Are you going to have enough clearance for your compound to swing over the cheese head screws?Good video Stan. Need to do that to my Clausing-Colchester lathe.
Whenever I finally get to build my shop, I will be putting these (DRO pros) on the mill and lathe. Would getting a 3 axis for the lathe and using the third on the tailstock quill be more useful than the compound? Is a third axis even worth bothering with versus just a 2 axis?
Yeah, spotted it before the text came up. My anal retentive self would have pulled the carriage off and milled a flat on the front of it for that mount though.
The more I watch these videos the more I realize how much I need a milling machine. With a lathe and milling machine there's really not much more to be had. I have a nice metal bandsaw and drill press but so much more can be done with a milling machine. Great video btw. Appreciate anyone that takes time out of their day to show their process and give us new ideas.
thanks Stan, Nothing like a fresh DRO view in the morning..
Well done and explained Stan. Looking forward to the next axis.
Stan - When you started to lay out the parts for the cross-slide (~ 8:00), you started to point out the fit issues which have kept me from installing a DRO on my 12x36 Logan.
I'm frequently up as tight as I can go against the chuck as well as the issues with the short tailstock quill which you've pointed out. The scale and read-head simply require that the cross-slide be too far back from the chuck for many of the operations which I perform.
For now, I set up a dial indicator as best I can, and work from that.
Cheers,
Eric
looking real good Stan. I can't think of running a lathe without a digital now.
ATB, Robin
Putting material back is always the hardest. :-D. Nice vid Stan.
Thanks Stan, I have had good luck with Dro-Pros units I have 4 of them in my shop and have never had any problems that wasn't self induced!!!!! and nothing that wasn't easily fixed. I did not go three axis on the lathes, but sometimes which I had. I did the same as you even after checking myself a couple of times, birthdays are hell on eyes, ears, and keeping things straight. Aloha
Keith Fenner did a similar install on his Rutland, using 3 axis scales and running auto oiling at the same time.
Hahaha... Stan.. You described so well to keep the Head and the Scale aligned with the marks.. and ... Oooops... Now the Crap screws has to come out that you can swap it around.. Maybe opportune time to replace with stainless cap head screws...
Nice job
Thank You
Great work. Enjoyed the series. Took some of the mystique out of the installation.
Yup! One of those "aww crap" moments for sure! Easy fix Stan...
And here was me thinking you were going to use the third axis for the tailstock quill.
hash masks on stainless strip and read head wrong. Great video Stan
Ha ha .. that was fast! We have a winner! e-mail your address to barzindustrial@msn.com for your free bottle of anchor lube.
It's on up side down Stan
cheese head looks like a wheel of cheese. thanks for sharing
ok what was that about the hash marks again. Good mount job.
I ID those rags as Stream mop pads.......
Upside down? Depends on your perspective.
Upside down = Right side up!! ;-)
Are you going to have enough clearance for your compound to swing over the cheese head screws?Good video Stan. Need to do that to my Clausing-Colchester lathe.
They are already switched out to button head :)
Were those 'cheese-head' screws zinc plated or stainless steel? Nice looking!
Can you flip the scale without having to touch the read head?
I have that dro. Can’t you make a bracket for the other side?
good video and install...maybe add a positive stop on your lathe bed to assure no bozo kiss on the reader...
Already done, thanks for swinging by ... you bad grampa ....
Whenever I finally get to build my shop, I will be putting these (DRO pros) on the mill and lathe. Would getting a 3 axis for the lathe and using the third on the tailstock quill be more useful than the compound? Is a third axis even worth bothering with versus just a 2 axis?
Troll master indeed! Apart from the upside down scale that front wiper looks like it’s not much of good use showing that big gap😉
Stan is it upside down?
Did you see the x-axis I did on my atlas? Was that not a possibility? I know it's not on many lathes.
I went and had a peek, pretty clever, but that would interfere with my taper attachment.
minor fail to line up your bar code . :) but you installed it more than most could do . :)
Hash marks :-)
So how well does that scale work when it is on upside down? Those pesky instructions!! Ignore them! lol
Yeah, spotted it before the text came up. My anal retentive self would have pulled the carriage off and milled a flat on the front of it for that mount though.