I am glad to see this . I thort i mite have had a bent frame. Someone told me how to check my bars and they wernt bent by much ,i would say the same as your ones . The guy in bike shop thort i was crazy when i showed him how much . Obviously just a server .not a rider. I guess im trying to say just a little bend can make a noticable noticeable difference.
Hi there, I like your work. I have a late DOHC which I’ve cafe racered too, I’m slightly confused by your comments about the gear shift alignment. Surely the marking shows the correct alignment for the factory standard shift linkage only. If you use custom rear sets you can rotate the linkage to the best orientation for those. I’ve made up some rear sets which work well and have taken no notice of the centre punched mark at all.
Yes, you are right, however, if you put it 180 degrees in the opposite direction to the original position it will select backwards if that makes sense. :)
I did see the twist on your video, but i thought it was an optical illusion (or how that is called) due to the camera position or fisheye... But, even with the twist, it still is my dreambike!
Not sure where you are located but this will help mate :) www.google.com/search?q=google+translate&rlz=1C5CHFA_enAU850AU850&oq=google+&aqs=chrome.1.69i57j0l2j69i60l3j69i65l2.7985j0j7&sourceid=chrome&ie=UTF-8
![How to Build a Cafe Racer Custom Exhaust - Honda CB750 [Stainless] TIME LAPSE](http://i.ytimg.com/vi/95kBhog_gmk/mqdefault.jpg)
★SHOP★- www.caferacergarageshop.com/
★ How to Build a Budget Motorcycle TIMELAPSE - th-cam.com/video/Qz5Hk2HZzKQ/w-d-xo.html
I know this video is 10 months old, but I noticed that your front tire is on backwards. Love the videos! Thank you for taking the time to make them.
I am glad to see this . I thort i mite have had a bent frame. Someone told me how to check my bars and they wernt bent by much ,i would say the same as your ones . The guy in bike shop thort i was crazy when i showed him how much . Obviously just a server .not a rider. I guess im trying to say just a little bend can make a noticable noticeable difference.
what went wrong doesnt matter how to fix it does thanks for a quality site
Enjoying the videos, Classic octane sent me here!
love the foot controls
I reckon you have been watching the Del Boy, Dan.
Nicely done, Dan! You certainly have some skills, Brother! Hope you’re well and safe there. 🏍👍🏍
Hi there, I like your work. I have a late DOHC which I’ve cafe racered too, I’m slightly confused by your comments about the gear shift alignment. Surely the marking shows the correct alignment for the factory standard shift linkage only. If you use custom rear sets you can rotate the linkage to the best orientation for those. I’ve made up some rear sets which work well and have taken no notice of the centre punched mark at all.
Yes, you are right, however, if you put it 180 degrees in the opposite direction to the original position it will select backwards if that makes sense. :)
really helpful mate thanks .
Great video Dan!
Thank you Scott :) Have a great may my friend
Mistakes one learn from are good mistakes!
I did see the twist on your video, but i thought it was an optical illusion (or how that is called) due to the camera position or fisheye... But, even with the twist, it still is my dreambike!
Thank you mate and yes Its definitely unique and about to get even better soon with a Fuel Tank Rack to match the luggage rack 😮
same here, i thought the camera was offset or something
When you say jump up n down a bit to stgn front end were you on main stand or in your bike stand . Will main stand work . ?
thanks mate
Hi classic octane introduced you. Looking good now subbed!
Good job 👍👌
You would be surprised by how much cutting an inch from the left on the handle bar would rebalance it.
I don't speak English, buy very Nice, i like your video, Best regards since México, sorry My English si very Bad jaja
Not sure where you are located but this will help mate :) www.google.com/search?q=google+translate&rlz=1C5CHFA_enAU850AU850&oq=google+&aqs=chrome.1.69i57j0l2j69i60l3j69i65l2.7985j0j7&sourceid=chrome&ie=UTF-8
You hadn’t noticed it? I would have had an ocd response to that lack of symmetry l
Nice way to WELD up some lose ends m8 👌 Take care : )
You crack me up HAHA :) well said brother
Why didn't you just put the reverse die on and cut against that?
Have you true a spoke wheel before? I'd like to see that.
Not something I've tried but I'm sure I will make a video on it when I do :)
Brazil 🇧🇷🇧🇷❤
👍
64th viewer ey
Thank you for the great videos btw, they've been helping me a lot here recently.
That's awesome and you are welcome :)
🇦🇷🇦🇷🇦🇷🇦🇷🇦🇷👍