ฝัง
- เผยแพร่เมื่อ 13 ก.ค. 2018
- So in this video i will test a bowling in my shredding machine. Obvisouly the bowling ball did not get caught by the shredder teeth, so i had to make it smaller with a hammer.
A bowling ball is very strong, and i had a hard time smashing it in to pieces.
Big thanks to bowling planet Ekeren for giving me this ball !
www.bowling-planet.be/
Here is a bit of info about bowling balls throughout history :
Source Wikipedia :
Historically, bowling balls were often made from dense hardwoods such as Lignum Vitae, but starting in the early 20th century, hard rubber became the primary material for bowling balls. The first bowling balls to be made from polyester ("plastic") were produced in the late 1950s. This would become the predominant material in the 1970s. In the early 1980s, polyurethane ("urethane") bowling balls were introduced. Urethane balls provided greater friction on the lane, which allowed for a greater angle of entry of the ball to the "pocket" (space between two of the front-most bowling pins, known for providing the greatest percentage of strikes), and as a better match to the increasing use of polyurethane varnish on wood lanes, and with wood lane "overlays" and fully synthetic lanes using a polyurethane surface. This is desirable, as a greater entry angle tends to provide a higher striking percentage.[4][5][6]
In the early 1990s, a new material known as "reactive resin" was introduced. Reactive resin is still made from polyurethane, but has been treated with additives while in a liquid state that create pores in the coverstock that allow it to absorb oil. As oil is absorbed into the ball rather than sitting on the surface, there is greater friction between the ball and the lane.[4][5]
In the late 1990s, "particle" balls were introduced. By distributing small particles into the reactive polyurethane cover, manufacturers are able to create even higher friction. This is particularly noticeable on oily surfaces, where a particle ball is able to create considerably more friction than balls of other materials. The types of particles and their properties may vary between balls and manufacturers.[4][5]
Particle and reactive resin balls are common in modern play, particularly on lanes with relatively higher volumes and/or lengths of oil.[4][5]
Plastic balls are also commonly thrown when a bowler wants a ball that will move in a very straight line, particularly while trying to make spares. Urethane balls are less common, but may still be used for strike shots on less oily lanes.[4][5] - วิทยาศาสตร์และเทคโนโลยี
![[TH] VCT Pacific Stage 2 - Playoffs Lower Bracket Final // PRX vs DRX](http://i.ytimg.com/vi/5HwO1bQyAx4/mqdefault.jpg)
I have a couple more bowling balls guys ..... What shall i do with them? Let me know below !
PressTube can we see your face
Throw them on something
Melt them
PressTube make a brass bowling ball out of bullet shells
Cast one!
I feel like I need to wear goggles watching you.
The shredder should have a case to close the top off so things won’t fall out
Joseph but how r we gonna see?
acrylic case
simple plexi glass walls to keep stuff on top !
Joseph Yeah, I was also thinking that.
Or fall in
Looks like huge pieces of bubblegum
The bowling ball looks and cracks like a jawbreaker
Only ed edd n eddy have jawbreakers that big
It is a jawbreaker, if you throw it correctly.
So true
Papa_ Stalin I thought the same
Bowling ball's like nope.
3:47 my brain trying to understand the notes I am studying
You need to like put some glass around the square so the peaces dont fall down
And maybe you should learn how to spell the word pieces.
Hacky Thieves I was saying/thinking the same thing
Dr. Bright we all miss spell a word time to time please don't be rude
@@uniqueplayz7979 Agreed
What happened to the new motor?
That Moment when you are early but dont know something funny sucks 😭😂
Ground absorbs the power of your smash put it on sth hard instead
Sasha Grey on a what? Sth?
Sssssssssssssoooooooooooooorrrrrrrrrrrrrrryyyyyyyyyyyyyyy
Sasha Grey ssssssssssoooooooooorrrrrrrryyyyyyyyy
Śpiący Rezydent
*Something
*Hate the video then i hear the cracking sounds OMG I LOVE THIS VIDEO*
This was oddly very satisfying
i was so nervous when you were smashing the bowling ball with your hammer, is seriously thought that 1 of the pieces was going to hit your nice car.
bowling bowls didnt want to shred hence each nd everyone jumped out of it. amazingly hilarious
Now you have shards of sharp plastic in your lawn waiting for someone to step on them.
Wow! We should stockpile all bowling balls as railgun ammo against aliens!
I wonder what your neighbours were thinking when they saw u hitting a bowling ball with an axe 😁
You gotta redo this with another contraption pushing the ball down.
I don't know if its just me but after this video I felt so satisfied
Cast your press tube symbol all will love it
Best idea
I like that cracking sound.....🤪
Same
DO YOU KNOW dont we all?
DO YOU KNOW ssuuwis
Lvo,x
us,pk0mpmos.cmd
I would love to see you shred some model cars of all different sizes , that way it will look like a real life shredder we see in scrap yards at work.
Cast your press tube logo
Am I only one, who's hearing popcorn sounds when it cracks?)
You should make a plexiglass box (with open top and bottom) to act like a guide and to keep pieces from falling off the grinder. Could use some rare earth magnets to hold it to the frame of the grinder.
Try getting clear walls to go around the Shredder like a cube and a wooden top that can be removed is would help with stuff not flying out
Maybe add an acrylic box on top of the shredder to use as a hopper so peices dont fly out but you can still see in.
I want to see a ballistics gel hand go into that thing... Is that weird?
Try to figure out a way to mount a few tape measures up and have the shredder pull the tape as it shreds it.
Would be hard to keep the tape from retracting back into the case.
What type of shredder is this?
Far more violent than I was expecting. What even is that stuff?
Hay Ben, ik hou heel erg van je video's en vooral van de Shredding Machine ik zag in deze video dat veel harde materialen uit de Shredder vliegen, zou het misschien een idee zijn om er een verwijderbare doos van plexiglas omheen te maken zodat het materiaal meteen terug word gegooid. Maar blijf vooral deze vette video's maken XD
The sound is fantastic
This is as great as combining 3 memes!
That is one stubborn bowling ball!!! Now I need to look up what they are made out of high-density resin? Just to keep in line with the bowling theme, you should shred some bowling pins.
I wonder how much an aluminum bowling ball would wiegh and how well it would perform in comparison to a regular ball, and a brass bowling ball. Same thing with the bowling pins.
But why am I squinting like the pieces can come through the screen LOL
Hallo, wie geht es dir
Good luck to road to the million subs!
You need to build a clear box that goes over your shedder so stuff doesn't fly out of it while it's being shredded
Drinking game: take a shot every time he slaps the bowling ball 😂
Differently need to be board to watch this fo sure. Having all they’s cool tools must be nice
You shredd it half with your hammer 😂
is it only me or... does the broken bowling ball looks like candy
I feel like I need to be wearing safty glasses just to watch this video!
Please, we all have to know.... where can we get a shredder like yours.
Looks like a jawbreaker!
There is something so satisfying about seeing all this destruction!
You could add some chicken wire around it to prevent stuff from flying out! Just a thought. Great videos!
Your shredder needs a hopper and an overhead camera for stuff like this.
You need to fabricate a plexiglass enclosure with a lid on top to keep stuff from flying out
What is a reason for that?
What's inside?
End part was amazing
Does anyone else have a sudden craving for popcorn?
looks like you need a clear funnel or shoot to keep everything in there
Satisfaction level 9000
Was the bowling ball shreded with the new or old motor?
Still old motor
hahahaha hit it with yer purse Susie
Can you shreed any metal
Goei plek om te Bowle in ekeren👌
so that’s what the inside of a bowling ball looks like
Here is a tip that can hepl you, you can build some kind of hopper to drop the obsects inside and prevent them to fall down, or jump outside the shredder.
I have a hopper for the shredder, but it obscures the camera view :)
PressTube well, if you make a window made out of methacrylate you can see what's going on inside, but that would be a lot of work😅
cam u even shread brass or auminium
You have to cask the world cup 3rd medal for sure. have hoped you get the final but pretty good though :-)
was waiting for a shard to hit that audi
Bowling ball... *requires hopper attachment. Hahaha
You are great and your videos are best in the whole youtube
Bro why is this shit so fun to watch
What the shredded shrapnel look like bro
You need plexiglass sides so stuff doesn’t jump out. But either way I still wouldn’t put anything I wanted to keep near it.
Please Crush LEGO Next If You Haven’t Crushed LEGO Yet!
Bowling balls FTW!
YOU NEED A PLEXI GLASS CASE LID THAT WE CAN SEE THROUGH AND YOU DROP THINGS THROUGH A LID ON TOP.
Ben do video about repair some old stuff
It looks like giant shards of candy.
Bowling ball in shredder equals Jiffy Pop
BOWLING BALL NEVER DIE !!!
Try putting them into the vacuum chamber and see if there is a change . Also try to cast them
how to scratch your car 101
Straight to the point...unlike some other ppl..
3:40 Top ten anime betrayals
Who won the casted fifa world cup?
Make a pleci glass box to keep everything in the shredder
Shred different types of melons or fruits. Melons could be honeydew watermelon cantaloupe pumpkins gourds etc. fruits could be you know apples oranges bananas dragon fruit... maybe a durian 👀 or you could shred ballistics gel. That would be a cool video.
Bowling ball popcorn!!
Needs an acrylic or plexiglass case
4:35 me as a drumming
The new motor is hungry and unstoppable
It’s still the old one ;)
I don’t know what I expected, but the shredder wanted nothing to do with that bowling ball!
I challenge you to make the *Eye of Agamotto* using *Gold*
Use one of the remaining bowling balls to make a sand mold and cast a brass bowling ball...Please please please😊😊
Good video but you need to buy a bigger shredding machine
You should put edges on your shredder.
Road to 2 Million
Next video you should try putting your hand in it
Hammer? That’s stormbreaker
Make a glow in the dark bowlingball
Did not think this was a what’s inside video
Put some squishy and hard fruits in the the shredder