ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2024
- Over the last four weeks we've taken on the challenge of converting our neglected and gross, Land Rover Discovery 3 (LR3) commercial into a family friendly, 7 seater, overland 4x4. The last peice of the puzzle is to fix the constant limp mode we keep getting under hard acceleration. We found the perfect tool for the job - but will it work?
Looking for a full Land Rover workshop or repair manual?
Click below and use the code LRLIVE22 for 22% off
shareasale.com/r.cfm?b=537553...
Save 20% FOR THIS WEEK ONLY - click below
TF950 - ICARSOFT LR V3.0 HAND HELD SCANNER FOR LAND ROVER - BY TERRAFIRMA
www.lrparts.net/tf950-icarsof...
PHF500101 - MASS AIR FLOW SENSOR FOR TDV6 2.7 RANGE ROVER SPORT AND DISCOVERY 3 AND 4
www.lrparts.net/phf500101-mas...
PYP500070 - SCREW - 6 X 16MM HEXAGONAL HEAD - FOR AIR CLEANER ON DISCOVERY 3 & 4, RANGE ROVER SPORT 2005-2013 AND L322 (3.6 TDV8)
www.lrparts.net/pyp500070-scr...
Chapters:
00:00 Intro
00:40 The two diagnostic scanners we look at
02:02 How the icarsoft tool works
03:31 How the Carly tool works
04:31 Driving the car into limp mode
05:56 How to change your mass air flow sensor
09:20 Testing the car after fitting new nass air flow sensor
13:12 The final result - ยานยนต์และพาหนะ
![Fc ครับ ขอแนะนำให้รู้จักกับ "น้องเปียโน" l [Nickynachat]](http://i.ytimg.com/vi/HQU6Q_IYTLo/mqdefault.jpg)
I just found your channel and watched the first few of your D3 videos. Totally agree, the icarsoft LR3.0 pays for itself. I have a D3 and a D4, its helped me a lot. Instead of throwing bits at a car and reading forums for possible causes, it tells you exactly what the issue is.
If you havent already done so, give your MAP sensor a clean, it will be full of carbon. Undo 1 hex screw and a rag is all thats needed - should get rid of the smoke that remains.
Agree totally, good bit of kit. Just gotta be sure that you do your checks & purchase from an authorised seller.
Just spotted this via google search >> "Bavarian Dominator - Review Centre"....... lucky escape lol
'Fix this Land Rover - once and for all' - How many times have I said that :) - nice Video - thank you for the effort you are putting in.
I’ll give another big thumbs up for the iCarsoft tool for LRs. Saved me thousands!
Never go for the ‘El-cheapo’ cheap Chinese Mass air flow sensors.
Great Video, Keep them coming, I went down the Gap IID Tool route, I had problems with the air suspension and Hands Free phone connection, saved me loads of money and time.
Hi, plus 1 regarding the gap iid , expensive but also saved me a fortune from suspension recalibration, live data etc , see there around £450 but seeing JLR are charging around £200 just to plug there scanner in they soon pay for themselves , along with not having to wait for an appointment, gap iid customer service is also second to none, based in Canada the staff there have always been extremely helpful , normally responding within 24 x hours
Excellent Video. Great to see you sorting the D3 out. Just ordered the TF950. Thanks for the recommendation! Keep the Vids coming!
the sign on the left at 10:21 could not be more apt 😂
Once and for all............. Now that would be a miracle.
I have that iCaresoft unit and it is quite interesting in terms of its use case for my discovery 3.
Brilliant video,so glad for you,and that diagnostic tool works really well, surprised with Carly,as everyone seems to push it as the must have, will be interesting to see how you get on, thanks for the time you have spent on the video.
Thanks 👍
Great video, very informative and useful
Thanks
That's a strange thing for the icarsoft to say - VIN not programmed etc, you'd prefer it to say no fault found. Thanks for the info on the icarly, never heard anything positive about them on the JLR's. Good video, have subscribed!
Now that I've seen this video, it take away some of the worry of owning a D3/4 and possibly looking at high repair bills. Also means you can keep the cowboys at bay!
Autel AP200 is like Carly but has a land Rover setup equivalent to the icarsoft (which I have for Mercedes) However, it can add modules like Carly and costs only 80 quid. I have used it for all the systems on my RR Sport (LR3) and it has done the steering, EPB reset, all sorts.
I have the same model. Works well, especially for air suspension inactive faults. But I still have to use it weekly… so no, it’s not once for all lol. That said, it’s worth the $100 I paid for it. 2003 L322 175000 miles.
If the code keeps coming back, you need to fix the problem, not just clear the codes once a week. Probably a ride height sensor, easy cheap fix
Interesting. I have an Icarsoft, had it a year and the only issue I have had is that I couldn't successfully code in my new injectors on my Puma 2.4, but it may have been due to the numbers not being very clear on the new injectors (IE I put them in wrong) and not down to the unit at all. Recently I've seen a lot of the Carly 'ambassadors' you mentioned and have to admit believing the hype and wondering if that would have been a better option. After this video I'm happy with my choice, thanks! By the way, if anyone knows how long the 2.4 takes to learn new injectors I'd be grateful, there is contradictory info online...
With the smoke out the back, have you thought of using Terraclean or something similar in terms of an engine clean? I did it with my old Disco 3 and it worked wonders and I got a slight fuel economy improvement as well.
I might give it a try. I've added a second bottle of specialist injector cleaner which has helped. Plus I'm planning to remove the EGRs this week.
That looks like a magic box! Does it work with the Range Rover L322, it does not mention which Land Rover types it is compatible with? Chris B.
yes, it should work well with the L322
@@LRLiveUKwhat about L320 RR Sport
Can it activate running lights ?
Hi. A query for you if you please.
Can this version of the Icarsoft do the following:
•program new key remotes
•Calibrate the suspension height sensors
•display live data from the compressor, ie pressure in the gallery, temperature of system and valve positions in valve blocks
•monitor parking sensors and adjust their distance settings
•modify CCF to add replacement ECUs and instrument clusters
I can see yours is a diesel so you may not know or be able to test but as my D3 is a V8 petrol, can this tool:
•monitor LRFT & STFT
•display spark plug coil output
•display O2 sensor live data
All the above can be done by a GAP IID tool but they are twice the price of the iCarsoft. However if its a more capable tool then its worth the extra money.
It's fairly comprehensive but quite a few of your items would only be covered by a pro spec tool. We have a new one coming soon to test - I'll see if that covers them.
Was the Pro Tool any better?
Could it do any of the items I listed in my initial comment?
Hi, I'm in the state's, I have a 2008 Disco 3 SE V8 which diagnostic tool would you recommend I could use! Cheers 🍻 🇺🇸
This would definately do the job.
Hi I have the same troubles in my Disco 3. I have changed the mass air flow sensore but still the same allarm. Also I have the P0087-00 how can I fix this? Thanks
Not sure what that code is but definately work trying to re-callibrte the steering (this tool will do it) and swap out the fuel rail sensor.
Can the tool put the air suspension in to tight tolerance mode, if so it will be ordered
I'll have to look into this.
Cheers
Just had a look and the unit can indeed put it in to tight tolerance mode!
I have got hold of a D3 but ..
The last owner had the handreak unit replaced and now it wonr start..he thinks he damaged something when he cut the cables..anyone know what that would have done?
Update..removed the can bus cables from the handbrake and linked them..all working except handbrake 😊...new one on order
Isn't that an expensive option. That's just being a parts changer.
Maybe, but it has fixed the issue luckily.
Leave Land Rovers in the showrooms, biggest load of junk cars that cost a fortune!, basically remember this "if you can't afford a new Land Rover, you definitely can't afford to own an old one" I'd never buy a Land Rover again, beware people, you have been warned.
Here's a sample of how I use iCarsoft:
*Problem*
_I find I have to turn the key twice or three times to get started in my discovery three. I suspect it maybe a fuel pressure issue and this can be checked with iCarsoft_ :
Fuel Pressure - cold reading 0.4 bar (normal reading 0.5 bar Haynes 4A1)
*Steps*
Diagnostics -> land rover -> v11.15 -> Discovery -> 2005 -> diesel v6 -> manual -> diesel v6 -> View Data
*Results*
Fuel lift pump
Fuel Lift Pump Power (low pressure pump)
Fuel Injection Pump (high pressure pump)
Fuel Rail Pressure Sensor
Injectors 1- 6
Glow Relay
Engine Oil Temp
==============
*Problem*
I suspect one of the calipers maybe sticking on one of my wheels. Thus reducing fuel performance among other things.
*Steps*
Diagnostics -> land rover -> v11.15 -> Discovery -> 2005 -> diesel v6 -> manual -> ABS -> View Data
*Outputs*
Wheel Speed Sensors
Wheel Direction Rotation
You can see in real time the wheel speed of each wheel. The wheel with the slowest speed was the wheel with the sticky caliper.
Most mass Air flow sensor are Denso from Japan
There is an icarsoft that goes across the range. I use it on all types of car