Toyota hilux turbo module/controller failure Diag + Repair ✅️👨‍💻

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 มิ.ย. 2023

ความคิดเห็น • 7

  • @johngonzales4631
    @johngonzales4631 ปีที่แล้ว +3

    That transistor is for the 5v reference voltage for the Vane position sensor in the turbo. If the water pump had been replace check the wiring behind the water pump. I had seem a couple of Hilux were the 5 volts reference voltage was shorting out after a water pump replacement blowing the same transistor. The transistor I used is a PNP 60v 5amps Part No. STD888T4. I bought them from Element 14 in Guilford, Sydney under Part No. 108-4555. A new module was over 700 dolares from Toyota. The transistor is only a couple of dolars.

  • @fkruth
    @fkruth 2 หลายเดือนก่อน

    Hi. Could you send me a copy of this diagram? One of the diodo is damaged. Behind the module the number/ positon d1

  • @johnhill3644
    @johnhill3644 ปีที่แล้ว +1

    can you show test with hantek tc10112c scope on can diag. and other test on scope set

  • @pedroqueiroz8097
    @pedroqueiroz8097 8 หลายเดือนก่อน

    Ola.tem o diagrama do modulo tgv Hilux pra me arrumar.?

  • @gustavosanchez8925
    @gustavosanchez8925 9 หลายเดือนก่อน

    Hola, estoy buscando información de driver de turbo, te agradecería si me compartes

  • @skcioroot2012
    @skcioroot2012 7 หลายเดือนก่อน

    How is diagrama do modulo please

  • @magattesamb4200
    @magattesamb4200 10 หลายเดือนก่อน

    Je cherche module driver turbo toyota prado d4d 2005