I know I’m late but hey I’m here, I had a 2009 f-150 platinum here in Michigan. Once snow built up on the rails while you were driving you would go to get out and the motor that lifts them would strip and then it would be time to buy a new motor for it
Looks like the rim is wider than the tire, so he's expanding the sides so they sit on the bead, then inflate to correct pressure. This way when he corners, the tread stays flat on the ground rather than flexing with the sidewall.
In some cases the bead doesnt seat all the way so air leaks out around the rim so the strap helps squeez the tire to the rim so you can get air into it.
what they didnt show is that when you do tht, it is safest to remove the valve core in the stem. i dont guess you HAVE to, but it doesnt take but a few seconds so i would do it just to be safe. nice video though. props
alot of times ya can just take the valve out of the stem and just put the quick conector thats on end of air hose on stem will seat beads cant hold on long usaly hoses are 120 psi keep fingers out of way it pops the bead quick
That Fu*&ing Bee or what ever it was, at the 50sec mark, scared the crap outta me. It sounded like it was trying to fly in my ear. Kewl vid ty for sharing.
hey mark you should remove the core from the valve when you are trying to re-inflate the tire, it lets a lot more air in and most of the time seats the bead straight away
@raptor350antigua the strap causes the tire to not expand when he puts air in it which causes the air pressure inside to push on the sides of the tire into the side of the rim which causes it to seal so that tire will hold air without going flat
I agree, i change my own tires on steel rims but if im putting tires on my nice new shiny aluminum ones i ttake it to a place and get it done for 10 bucks.
Hello, In the sixth second of the video, the pass in the sky, a fast flying object! Can you indicate to me of what he(it) acted? As regards tires, there is a special fat tire! What facilitates the assembly(editing).
The side steps on the truck are epic!
They are perfect for all the tiny men who need these trucks. Lol
I know I’m late but hey I’m here, I had a 2009 f-150 platinum here in Michigan. Once snow built up on the rails while you were driving you would go to get out and the motor that lifts them would strip and then it would be time to buy a new motor for it
Cutest little cat ever.
the power slide was epic and loved the way he broke the seal
That step on your F-150 is sick the way it comes down when you open the door.
Word, That's a really nice lathe!
That's cool I am a machinist and love that kinda stuff. Love your videos Mark.
starting fluid an or ether works great
Looks like the rim is wider than the tire, so he's expanding the sides so they sit on the bead, then inflate to correct pressure.
This way when he corners, the tread stays flat on the ground rather than flexing with the sidewall.
In some cases the bead doesnt seat all the way so air leaks out around the rim so the strap helps squeez the tire to the rim so you can get air into it.
LMFAO 0:44 You got bees on your camera!
Thats awesome at 0:34 the runnning board on the truck fold up.
I love your truck!
im seeing this everywhere!!! AAAAHHHH!!!!
what they didnt show is that when you do tht, it is safest to remove the valve core in the stem. i dont guess you HAVE to, but it doesnt take but a few seconds so i would do it just to be safe. nice video though. props
Dam Nice truck
haha the cat is the best lol
Even the cat is like, wtf those dummies doing lol
alot of times ya can just take the valve out of the stem and just put the quick conector thats on end of air hose on stem will seat beads cant hold on long usaly hoses are 120 psi keep fingers out of way it pops the bead quick
That Fu*&ing Bee or what ever it was, at the 50sec mark, scared the crap outta me. It sounded like it was trying to fly in my ear. Kewl vid ty for sharing.
hey mark you should remove the core from the valve when you are trying to re-inflate the tire, it lets a lot more air in and most of the time seats the bead straight away
ive never used a tie down, but a rope and a stick works great, cuz when it sets it unwraps..
looks like your cats wearing glasses in the beginning!!! lol
GOD IS GREAT/ BEER IS GOOD AND PEOPLE ARE CRAZY I LOVE THAT SONG!!!!
The strap is sothat the tire doesn't ballon in the middle and it also helps set the bead on the rim
The bee also wanted to appear in the video :D
is that catone of daves? and what are the new tires?
@raptor350antigua the strap causes the tire to not expand when he puts air in it which causes the air pressure inside to push on the sides of the tire into the side of the rim which causes it to seal so that tire will hold air without going flat
I like how the stepbar closes when the door foes
love the bead breaker
You have to put a high amount of air in the tire so the bead pops and the strap makes it so the tire doesn't stretch.
Would love to have the HAAS cnc lathe. A must have for any farm.
what up it the tie down arround the rope?
I miss all these videos like this :(
i'm jealous of your garage.
who else noticed when he got out o the truck in the beggining the step up bars went back in?
good vid thanks!
u have a really nice f-150 haha people r crazy in the back on the air
I agree, i change my own tires on steel rims but if im putting tires on my nice new shiny aluminum ones i ttake it to a place and get it done for 10 bucks.
what rims do you use////!!@? i cant find them anywhere
concretebonee go on Motosport.com or ebay and type in your rim measurements and bolt pattern and headlock rims
What tires you running on and off our quad is looking insane and you did an awesome job and keep it up to share your video
ya it is....i saw an escalade with that too
can you still use the old tire after u take it off like that?
Stop coughing on me, smoky
What is that orange ring your screwing on at 2:30?
ive got that same plain but its made from canadian cans
So instead of the tire expanding from the extra pressure, the pressure goes to the sidewalls to help set the bead.
Is that how Americans change atv tires ?
That a nice Haas does any of you guys know how to run it?
what size of tires are that? 18" or 20"?
why did you throw the tire on the ground?
just let the air out lube it up and air back up and the bead will pop right on watch your fingers
5:37 nice sag!
thanks
i like ur cat
What tires did you use
Mark Tus videos son super geniales cuando veremos uno con Travis Pastrana ?
how many pounds did you put on it to put the bead back on??
hi i bought itp ss212 12inch for my grizzly 550eps tires dunlop oem but it has air leak from 5:14
Hello,
In the sixth second of the video, the pass in the sky, a fast flying object! Can you indicate to me of what he(it) acted?
As regards tires, there is a special fat tire! What facilitates the assembly(editing).
Cordially. Denis
What tires do you run
why did you strap the tires with those ratchets?
to place the bead lock seal on the tire if its bead lock
What does the strap do?
truck is sweet
mark, try puttin soap on the lip of the tire and it will seat alot easier (:
lol seemed like auto closing doors and self retracting side steps, fuckin blew my mind haha
whats the strap do?
@Pryhawk good, you told him off, bad, you called him a broski, which isn't even a word... :( :)
holy shit a bee 0:48
why do u have straps on the tire/?
whats the year of truck
thumbs up for kitty at 2:28
Do a vid about the haas tl-2 in the corner.
why do u put the strap around the tire
why are you putting tie downs on your tires?
loocked like some crop dusting in the begining haha
i like th kitty cat :)
thats cool
That's my brothers machine shop, he does tool and die for a living.
sweet shop u have some great shit in there
i think its to keep it it that square form
so, the F150's running board tucks itself away???
ok thanks
To see if there are any leaks I think.
my dad has a budweiser can made plane just like that his friend made :)
Soft Kitty
Warm Kitty
Little ball of fur
Happy Kitty
Sleepy kitty
pur pur pur
0:44 BUMBELBEE
@Mark Ruiz
@paquor97 with tubeless tires you need a complete seal around the rim thus the use for rachet straps
@DT400KFX ktms come with Douglas wheels, not hipers
the running boards on that truck tho
porq no probó la hyper? dalchicha
Casa Del Amo that ain't spanish
damb how many guys does it take to change an atv tire ? " THE WORLD MAY NEVER KNOW "
lol😂
Damn I Like your Car..
Probably not...bead is probably done after that.
you do know there are bettr ways to break the beed than using the truck. you could just jump on the 4 x 4 for instance.
you guys like yourself some carrie underwood haha
@makaveli087 i love tose trucks my dad has one its standard fun to ride arround/.. do you have a bike? im 14 and ride a 450r honda
@pope350 wut,, u diddnt c it?
@redv8jeep its called sponsor broski.
I'm more impressed that ford didn't blow up going up that block
How many guys does it take to change a tire??