Thank you very much for stopping by and for subscribing - very much appreciated. Currently there are 50+ new videos planned - most coving the PICO so hopefully I will keep you informed and entertained 🙂
Thanks for the slow and clear information....I subbed in the expectation you might have more similar content, or have previously covered them. As an older EE I never got into digital projects, but your excellent laid back style makes it easy to sit through the school level explanations.
Hi Peter, Thanks for stopping by and watching the video! I am happy to hear it was of value to you. I hope to keep doing more but I got to get viewership up to help fund things. In the meantime I will keep plugging away! Thanks again for the feedback. Cheers!
@@MakingStuffwithChrisDeHut I guess I have been using TH-cam actively since your first upload, and I only just found your channel by accident. My gut feeling is that YT is not as interested in giving smaller content providers exposure as they do for larger sites. I often would search YT for a specific subject, and a thought I have for you is connecting your content to a popular subject and all those who are searching would find your channel - for example - solar and renewable energy are on my interest list, and suspect others too. I may have found your channel years ago, if you had used a Pico to control something solar (eg charger controller, inverter, or even a power management system), I imagine there are even more popular subjects and I would hope that YT looks at the headings and places relevant results into the searchers results. I will be watching for your next video - you have a special skill in content creation which I really enjoy.
A short explanation of how to "map" the readings to calibrate and limit the range would be helpful. In the comments I see questions about measuring voltages higher than 3.3V, a discussion of voltage dividers might be helpful as well. Thank you for your helpful videos!
Hi, how to read bi-polar range of analog input voltage? Unless it's a temperature sensor, most of the real-world sensor output range from negative to positive voltage.
Welcome back!!! Life is good again, it took about 5 years after the end of the Woodworking at Home Magazine to get things back on track. After about 20 years I couldn't let the woodworking videos "sit in a dusty corner" anymore so I created this channel. I can't do too much woodworking anymore (respiratory issues) so I decided to create new content following another of my passions. I am glad you found the channel and I hope you enjoy it! Cheers! Chris
What is connected to your ADC pin? Is that sensor providing a stable voltage? Unfortunately, the sensor could be outputting an unstable voltage and you won't be able to stop that. However, you can average a number of samples and use an averaged value.
Due to the switching power supply noise you will encounter such problems whether you are sampling fast or slow the noise will render most ADC data useless. And, sorry to say that even averaging can't get you an assured good sample. TH-cam make GreatScott has a video showing how you can remove a resistor to the "aref" pin so that you can use an external power supply (like a battery (they have no noise at all)). If you measuring a DC voltage or slowly varying DC voltage try a 100nF or 1uF on the ADC input to ground.
Hey Chris! Thanks for another great video. Question for you... I will be powering my pico with a battery; how can I read the input battery voltage and display it on the screen? My lipo battery will go beyond 3.3v at a full charge, so I know I can't feed the battery input directly to a GPIO pin and measure it with the ADC. Google says I need a separate voltage divider IC or something, is that really the easiest way to go about it? I find it hard to believe that my pico isn't capable of measuring the input voltage straight from the VSYS/VBUS pins somehow, no?? Is that just the way it goes, since the whole RP2040 runs off nothing more than 3.3v, or does the PICO have some kind of clever hardware already onboard that will let me measure the proper battery input voltage?
I suspect you want to use the PICO to get the analog data because the PI does not have analog inputs. There is a more direct way for the pi to get analog data - see this video...th-cam.com/video/r5SYyQB0e8w/w-d-xo.html Cheers! Chris
I tried to read a 10k ntc thermistor with 20k to 3v3. I found the adc on the pico loads the input like about 25k to gnd. Use a voltage follower If you need accurate voltage,
Nice video. Would just like to point out the function you described was exponential not logarithmic. A logarithmic function would start fast and slow down as you approach bigger values :)
This was excellent. As clear and concise a presentation as I have ever seen. Please keep making them
👍
Thank you very much for stopping by and for subscribing - very much appreciated. Currently there are 50+ new videos planned - most coving the PICO so hopefully I will keep you informed and entertained 🙂
Thanks for the slow and clear information....I subbed in the expectation you might have more similar content, or have previously covered them. As an older EE I never got into digital projects, but your excellent laid back style makes it easy to sit through the school level explanations.
Hi Peter, Thanks for stopping by and watching the video! I am happy to hear it was of value to you. I hope to keep doing more but I got to get viewership up to help fund things. In the meantime I will keep plugging away! Thanks again for the feedback.
Cheers!
@@MakingStuffwithChrisDeHut I guess I have been using TH-cam actively since your first upload, and I only just found your channel by accident. My gut feeling is that YT is not as interested in giving smaller content providers exposure as they do for larger sites. I often would search YT for a specific subject, and a thought I have for you is connecting your content to a popular subject and all those who are searching would find your channel - for example - solar and renewable energy are on my interest list, and suspect others too. I may have found your channel years ago, if you had used a Pico to control something solar (eg charger controller, inverter, or even a power management system), I imagine there are even more popular subjects and I would hope that YT looks at the headings and places relevant results into the searchers results. I will be watching for your next video - you have a special skill in content creation which I really enjoy.
@@mekuranda I believe you are correct Peter. It is hard to climb up in the TH-cam rankings and I hope to gain some ground soon.
A short explanation of how to "map" the readings to calibrate and limit the range would be helpful. In the comments I see questions about measuring voltages higher than 3.3V, a discussion of voltage dividers might be helpful as well. Thank you for your helpful videos!
Hi Jeff,
Thanks for sharing your suggestions, both excellent ideas. I got them noted in my "future stories" document.
Cheers!
Chris
Hi, how to read bi-polar range of analog input voltage? Unless it's a temperature sensor, most of the real-world sensor output range from negative to positive voltage.
can you get stable milivolt or microvolt readings with this ADC for load cell signal?
I have no experience trying that but I will say, you will need a VERY STABLE power supply and circuitry.
Chris
Hey thought I recognized the voice. I go back to your dvd days hope you been well
Welcome back!!! Life is good again, it took about 5 years after the end of the Woodworking at Home Magazine to get things back on track. After about 20 years I couldn't let the woodworking videos "sit in a dusty corner" anymore so I created this channel. I can't do too much woodworking anymore (respiratory issues) so I decided to create new content following another of my passions.
I am glad you found the channel and I hope you enjoy it!
Cheers!
Chris
Great video thanks
You are welcome! Thanks for watching!
Please, how do i get stable readings from adc pin, I am getting jumping readings even tho they should be stable, do you have some idea how to help?
What is connected to your ADC pin? Is that sensor providing a stable voltage?
Unfortunately, the sensor could be outputting an unstable voltage and you won't be able to stop that. However, you can average a number of samples and use an averaged value.
Due to the switching power supply noise you will encounter such problems whether you are sampling fast or slow the noise will render most ADC data useless. And, sorry to say that even averaging can't get you an assured good sample. TH-cam make GreatScott has a video showing how you can remove a resistor to the "aref" pin so that you can use an external power supply (like a battery (they have no noise at all)).
If you measuring a DC voltage or slowly varying DC voltage try a 100nF or 1uF on the ADC input to ground.
Hey Chris! Thanks for another great video. Question for you... I will be powering my pico with a battery; how can I read the input battery voltage and display it on the screen? My lipo battery will go beyond 3.3v at a full charge, so I know I can't feed the battery input directly to a GPIO pin and measure it with the ADC. Google says I need a separate voltage divider IC or something, is that really the easiest way to go about it? I find it hard to believe that my pico isn't capable of measuring the input voltage straight from the VSYS/VBUS pins somehow, no?? Is that just the way it goes, since the whole RP2040 runs off nothing more than 3.3v, or does the PICO have some kind of clever hardware already onboard that will let me measure the proper battery input voltage?
Hi Kaylor87, The best method is to use a voltage divider.
Chris
How would you send those values to a program on a Pi? Thank you.
I suspect you want to use the PICO to get the analog data because the PI does not have analog inputs. There is a more direct way for the pi to get analog data - see this video...th-cam.com/video/r5SYyQB0e8w/w-d-xo.html
Cheers! Chris
I tried to read a 10k ntc thermistor with 20k to 3v3. I found the adc on the pico loads the input like about 25k to gnd. Use a voltage follower If you need accurate voltage,
Thanks for sharing David.
Cheers!
Chris
thanks Chris!
Hi @bArda26,
You are welcome!!!
Cheers!
Chris
Nice video. Would just like to point out the function you described was exponential not logarithmic. A logarithmic function would start fast and slow down as you approach bigger values :)
Hi Abdul,
Thanks for the clarification.
Cheers!
Chris
thank you sir 👍
You are welcome.
Cheers!
Chris
Subscribed!
Thank you!