How to Make Solenoid Engine DIY
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2016
- Watch How to make your own Solenoid engine. Cylinder and piston type high speed solenoid engine homemade. Click here for step by step guide tutorial to make solenoid engine DIY
www.newphysicist.com/make-sole...
A solenoid is a type of electromagnet when the purpose is to generate a controlled magnetic field. If the purpose of the solenoid is instead to impede changes in the electric current, a solenoid can be more specifically classified as an inductor rather than an electromagnet.
Things needed to Make Solenoid Engine
ACP sheet or fibre sheet - small pieces
Fibre reeper pieces
Fisher plugs
Screws 1.5”-2nos, 3/4” -4nos
Magnet wire or insulated copper wire- 26 gauge- 30mtrs
Syringe- 2nos
copper wire or GI rod- Guage 12- 30 cm
Copper wire- Guage 18- 30cm
Cylindrical Magnets
Wood wheel
Tools needed to Make Solenoid Engine
Angle Grinder
Drilling machine
6mm drill bit, 4mm drill bit
Cigar lighter
Screwdriver
Player
How to Make Solenoid Engine
Step 1: Making of Solenoid Cylinder
First of all Cut two Similar Pieces of ACP or fibre sheet.
And mark Syringe dia on the sheet. Then Remove unwanted Part.
Now cut 2” length from a cylinder part of a syringe. Fix the Syringe piece on the sheet.
Now is the time to wind the 26 gauge copper wire on the syringe piece.
Wind magnet wire tightly. Minimum turns 60, maximum: as much as possible.
The more you wind magnet wire, your engine will perform faster and powerful.
Make necessary holes. Watch Video.
![อาจารย์ยอด : ลุงแว่วเล่าเรื่องผี [ผี]](http://i.ytimg.com/vi/Fd2Qsy4dqpM/mqdefault.jpg)
![อาจารย์ยอด : สวยกินคน [ผี]](http://i.ytimg.com/vi/_-TIJOwkRA4/mqdefault.jpg)
Woodglut comes with very useful plans with all the details you need.
That’s really nice
@@newphysicist Yeah ✌️
Bravo e complimenti per la semplice realizzazione.
Nice video. Good setup with different idea. Keep it up.
Thank you. You have some awesome DIY videos. I have subscribed to your channel. I hope you will subscribe to my channel. If you are ready we can work together to promote our videos by giving likes and share.
Done. agreed to work together
Science & Technology 1
Thank you .Learning so easy !
thank you.
very good.
hello from México.
+Angel Fernando Jiménez Cano, thank you so much..
Congratulations from Colombia !!! beatiful project.
+Carlos Silva , thank you very much. I'm going to make more beautiful and useful projects. Please subscribe to new physicist to get them on your homepage.
Great work. Excellent results.
Thank you for your kind words. Don't forget to subscribe to our channel.. Latest project is almost ready for upload. Get it directly in your youtube home. Watch and share! Thank you.
very nice job!!
and it's working perfectly
One of the best, thanks for sharing...
Thank you very much. Subscribe to us for more videos like this.
Que bien parsero megusta mucho la electronica usted es un genio felisitasiones.
very helpfull information.
Thank you for your valuable comments. Kindly subscribe to my channel and recommend to your friends. Any suggestions to improve my channel?
Great idea.. Thank you for sharing
Kindly subscribe to newphysicist for more DIY tutorials
New Physicist,
very creative with the syringes and the 2 pistons, a great experience of physics to present in the school. Could you put the crankshaft at 90 °? Congratulations, like
This is actually cool
Thank you. Don't forget to subscribe to new physicist. Any suggestions to improve my video structure?
i like your teaching
Excellent !!😎
Sharing is caring..
shared
Good tutorial.. Shared
Good job
Muito bom, gostei, meus parabéns.
Music is so lovely and project too
thank you for helping
+V shiva kumar,👍
thanks for your help
+Kaiser de Emperana Beelzebub IV, you are always welcome. Subscribe to my channel, like my diy project videos, and share.
good work man
Celver Fox , Thank you for subscribing.
Muy bueno y puede ser muy útil para mover incluso otros motores para generar energía, solo faltaría saber cuanto consumen los solenoides de corriente. Me gustó
great work
really impressed. Can you give more detailed text based guide to make this solenoid engine?
Thank you laven for your kind words. Here is the link www.newphysicist.com/make-solenoid-engine/
Enjoy. Don't forget to subscribe to my channel.
thanks .nice video
Very, Very Good !!!
+Rosano RIBEIRO LEITE, than you!🙌
thanks for the video!
i am in the process of building a diy solenoid valve for agricultural purpose.
would you be able to help me with specifications ?
Fantastic bro
Hey there! Great project! I'm trying to execute it for college, but mine is not working. I've used an old laptop charger as well, gauge copper wires and everything. I believe the problem is the magnets: I've used computer HD ones. What do you think? Apart from that everyhting is exactly like you did.
Probably the best and simple solenoid engine making video 👍👍Keep it up😊, Subscribed already!
nice channel, way to go.
Thank you Frank. Nice to meet you. I'm showing my passion through this channel. I love to make.. Can I know more about your passion?
It is nice to see the things you can make with so litlle supply and tools. Nice video, it helped me build my own version.
wow . whary nise engine video u are great.
it is perfect though
Great concept. But making the connecting rod-piston junction flexible enough is critically important. What is the highest RPM that you have been able to generate?
+Angshuman Pal, thank you. It would be between 150-250. But not yet tried to measure. However, its possible to increase the speed by increasing voltage and solenoid turns.
It won't start automatically. Add one more cylinder. That's 3-cylinder solenoid engine will start automatically and it would have higher rpm.
Fantastic.Supperpb !
good work
+lover for ever, thank you very much. I'm going to make more beautiful projects like this. Don't forget to subscribe to my channel.
hey i really liked the project but I've already started working on Van De Graaff generator and needed a few tips abt the belt and rollers so if you can kindly help me I'd be much obliged
I have subscribed you 😊 plz upload more projects
+V shiva kumar , thank you dear. I'll. Check out my latest videos.
I am satisfied for this side...
nice project
+nityanand roul , thank you. Don't forget to subscribe to my channel for latest project ideas.
Yes
Excellent music
fiber reeper ki jgah or kuch use kr skte h kya
magnets use krni jroori h kya
if you are planning to make another one...try neodimium magnets😉
Thank you very much for your very nice project
ok thank you very much😊😊
+V shiva kumar, you are always welcome. Don't forget to subscribe😀
Does it matter if the top side of the piston magnets are north or south?
Hi Bro supper video 👌👌👌👌👌
Thanks man!🌸🌸
Bravo super Danke
+Andreas hübner thank you dear. I have just uploaded an awesome video.. Check it out.
muito bom
Obrigado querida. por favor inscreva-se
ok I will try now to make the solenoid more accurately
+V shiva kumar , regards
VERY LIKE :D
nice one and please can you shaw me the wiring I am about to complete this project
roshan nigam shaw, Glad to know you are interested in solenoid engine.
Connect starting ends of coils together and connect to negative lead of the battery.
Connect remaining 2 ending leads to 2 make and break arrangement.
Connect battery +ve to crank shaft.
that's all. for more info click link provided in the description section.
If you have doubt, don't hesitate to ask here. I'm always live to help. Thank you dear.
what kind or battery did you used?
OK bro thanks you I will ask my doubts later
greatest
would be a nice solar powered fan. I like it
Sorry what did you mean dear?
With large fan blades and a bit of voltage I think this motor would make a powerful fan.
Yeah you are right. Working principle of all types of solenoid engines are same as of the electric motor.
But it's beautiful.. right?
ok thank you😊
+V shiva kumar, go ahead. Best wishes
is there any sort of replacement of ACP :)
where do u get fibre reepers and ACP sheets
from this engine can we generate current ?
i think it would be better if you had cut the cylinders a little bit longer
Thanasis Tournatzis, Thank you for your suggestion. Its the optimal length for the magnet I used. I could also overcome the problem of piston head-connecting rod flexibility by reducing cylinder length.
what do you think?
pls about a crang shaft
Gr8 project.
One request name of background music please...!
"Eine Kleine Nachtmusik" is the name of the background music.
hi! can i ask the measurement and distance between bends for the crankshaft? thanks.
super..
+Sajeesh Vk Vattoli Vattoli thank you bro. Pls subscribe to my channel for more projects.
Smart,
Sir Jo apne cylinder par copper wiring ki wo kitne mm ki h
Ya kitni mooti h
ok thank you
What is the power input u given and what is the outpout rpm of that wheel plz tell it sir
Where can I find fibre reeper PLZZ help, I need it to make one of your heliostat solar power plant project
Enquire in a hardware shop. Usually it is used to fix glasses on windows. 👍
How do you conected the wires is there any detailed view of it or a diagram?
I actually forgot the Diagram friend. It’s been 4 years since I created it. Let me check once again and clarify.
Where can I get these fiber reepers?
How many turns should i make on serynhe
cool
What is your magnet pole in first and second cylinder
Will 9 volts be enough?
I am using battery eliminator for DC supply
yes I used 26 gauge copper wire
nice :-)
georg841984 thank you. Subscribe to my channel for my latest videos.
What is the minimum voltage required to run this solenoid engine? Piston design super..
We used a laptop adapter to run this engine.. That is 20v. 12 volt is enough to run this solenoid engine. Let me know once your solenoid engine project completed. Thank you
Which gauze coiled copper wire
is it possible to make slim and small
ok thanks
I am using neodymium magnets of dimensions 10mm ×3mm
Hello Sir, what is a :Fibre Reeper Piece"? Forgive me i m italian and i have no idea what it is. Thanks. You project is wonderful.
+Tiziana Hetherington, They are used to fix glass sheets on window panes. They are widely used in India. Its a hollow, easy to bend fiber material. I'm using this material for wide range of applications, especially when making new physicist projects.
Pls visit a carpenter workshop or a hardware shop to find this or similar material.
Or I suggest you to use your creative skill. Regards!
Hihihi thank you very much, now that i know what they are, i will try to find something similar.. Ciao and thank you for sharing you videos.
You are always welcome. Keep in touch with my channel, New Physicist. Share best videos.
Pls suggest
+Vidhi Gupta, I usually make projects with materials that are available to me. These are used to fix glass pieces on window panes.
If it isn't available. Look around you. I'm sure you'll get..
wow
i ask, people like u who got talent, why r u not going for some serious projects...
+billa , Glad to hear that. Thank you for your motivation. People like you are my asset. I'll try to do my Best. Have a nice day.🙋
how to make the solenoid perfectly
+V shiva kumar, use 24 or 26 guage magnet wire. That is insulated copper wire.
Turn tightly
More than 50 turns
Layer by layer maximum possible
hey sir may I ask 2 questions?
1. a 1-meter magnetic wire is nearly enough to make 60 turns winding?
2. What is the girth or the diameter (mm) of the syringes did you used?
1 meter is not enough I think.
Dia of syringe is 12mm
Thankk youu sirr anotherr question 🙋♂️, it can run with 3volts to 6volts or maybe 8volts?
I conducted a science investigatory project and I’ll make a solenoid engine powered by thermoelectric generator (TEG) type
Yeah definitely
Let me know once you are done. I appreciate your move
does solinoid current is joining in series?
+Sanil Soraisham, no dear. The make and break arrangement will pass current through one solenoid at a time. Alternatively.
i used your idea and i had made the model as you done but when i connected it to the battery it does not rotating i tried it rotating many times but it doesnt worked can you explain whats the problem please today is the last date of submission of the project
+uday kumar, change polarity of magnets.
Make sure, slip contact is flexible enough for free rotation of crankshaft.
kkk sure tanq
nice work.song name??
Thank you. Kindly subscribe to us..
Eine Kleine Nachtmusik. Extremely sorry for late reply.
the cross section of Copper wire is 26 gauge or 24
+V shiva kumar , both will work brother. Let me know once you complete. Thanks
how to Connect rods to Crankshaft eas
how much lenth wire is needed for one cylinder
if i want to make magnets not to contact with cylinder walls what should i do, because i made it with neodymuim magnets but there is friction,can i do that
+ansary hameed , glad to know you are making a solenoid engine. That too using neodymium magnets. If you are using a syringe for cylinder, friction would be negligible. Don't bothered about it. Neodymium magnets are powerful enough to overcome this.
Try some lubricant between two surfaces. There should not be a large lap between magnet and cylinder.
Make 3 cylinder solenoid engine instead of two. It'll start automatically.
Regards. Let me know once you are done.
Wht is the need of Dc ...is it compulsary