You could have put the pistons in a 90 degree angle relative to each other so that when one piston is in the dead angle (where it cannot push or pull due to being horizontal to the cylinder), the other piston is already past the dead angle and can help the second piston over it. It would require a more complex and accurate timing circuit, but it can be done. Reed switches are one option.
Sir,please explain that point.... Starting point of coils are connect at one point but starting point of first coil is connect to second coil or it is connected to lower break and arrangement slip.....sir please clear that point...
New Physicist we have made our car but it is not working on the connections shown please give an explicit response on the connections and the possible error that might have occured reply ASAP
+Rahul Balakrishnan Nair , yeah thank you for valuable suggestions. Check out my latest project videos. No. Caption. But easy to understand. Comment your opinion.
Can you please tell me is it carbon magnet or steel magnet and what is it's length used in making piston? Also what can we use as an alternative for ACP sheet? Please reply ASAP!
+Khizra Ali, it's a ferrite magnet.. But I recommend you to use neodymium magnets. They are more powerful than ferrite.. Acp sheet is not a must. I used ACP sheet because they are clean.. You can use plywood, hardwood.. Etc
We are unable to make proper connections of the car because the connections are not clearly visible in the video and our car is not working by that connections, you please explain the connections in more details. please.
+Zubia Siddiqui, join starting leads of both solenoids and connect it to any polarity. Suppose -ve. Then connect +ve polarity to the crank shaft through a slip contact. Now, connect 2 ending leads of solenoids to two make and break contacts near crank shaft. That's all...
New Physicist We have carbon magnets available, can we use carbon magnets instead of neodymium or ferrite magnet? Also what's the length of the magnets you have used? Your reply would be of great help.
+Zubia Siddiqui, More magnetic-->more power Neodimium magnets are the best. Maximum half the length of solenoid.👍 Experiment.. You can do it. Change voltage, change number of turns, change magnet power..
Cool But need more précision on the emplacements and alignment of the different pieces not to lose to much power Add a solar panel to made it run could be fun
lekin battery lagaya hai to car ko push Q karna padta hai, usme ek switch lagaya to vo switch dabate hi car aage jayega but this is so cool idea i like this idea and i make it definately
Pretty cool add an servomotor and an arduino controller and make it awesome!!! Very nice work
pasti anak2 RBL pada nonton video ini
Ya benar sekali
Apakabar gan
Sepertinya
where do i get these fibre reepers
Impressive,like the ways of course you area moving to.
using flat screws, man that is something....nice:)
+Tom, thank you for comment. That piston design is awesome, isn't it?
it is cool...very educative for youth...
Can u explain which ends are connected. To the battery.... For this video.....
Do you use copper wire for coating the tube?
shfc
nice creation....
but where can I get fiber ripper...and copper rod of 12 guage
You could have put the pistons in a 90 degree angle relative to each other so that when one piston is in the dead angle (where it cannot push or pull due to being horizontal to the cylinder), the other piston is already past the dead angle and can help the second piston over it. It would require a more complex and accurate timing circuit, but it can be done. Reed switches are one option.
+PunakiviAddikti, thank you for suggestions. It's clever.
hi
Where will I get the plastic pieces?
Master mind broo
👍👍👍👍👍👍
Excellent very educational
wow fantastic
Great craft👌
nice work
You could show a circuit diagram for the novice builder. I also would like to know what fibre reaper is. As long as it not related to the grim reaper!
Looks like wood.
Nice experiments
great work.
nice videos bro 👍keep it up
Maybe some kind of clutch-y adapter, so you can start the engine before and so it doesnt need a push?
Sir,please explain that point....
Starting point of coils are connect at one point but starting point of first coil is connect to second coil or it is connected to lower break and arrangement slip.....sir please clear that point...
You are aowsome dude
Can we use hollow cylindrical magnet or not?
Very nice bro
very cool
it awesome 👍
wow amazing!
Why is everyone calling everyone dear?
Too Good
superb
how much gauze of wire would you used for winding?
amazing.......
what!!!!!!! brain is their beautiful
can you please provide its circuit diagram ... because it's difficult to understand from the video ...
cuantas vueltas minimo debe tener la inyectadora con cable de 1mm
Can u send the description
Sir will this car really move if I make it .pllzzz reply
nice
Can we use it as AC current dynamo?
It is possible theoretically. But there r more efficient dynamos in the market. However it is possible Allwin Aristo ✅
yo should make projects with accesibles materials, because the "fiber reeper" not is accesible for all the world only for you and india
This is dc right??
rendu batteries use cheshav ika motor pedithe saripothundhi kadhaa
you are very god ctreative where R U from
v. good
Sir aap connection bta skte ho kya kse krna h or kha krna h
Kitne volt ki battery use ki h?
This time I'll use avasva instructions to make it by myself.
Wire ko kaise kaise joda gaya kuchh pata hi nahi chala
What is fibre reeper
And where we get
I'm building one for a school project :) Hope it has enough power to move the car.
Did it have enough power?
@@neutrida5091 he is dead
This is so sad
Can we hit 50 likes
B1ue let’s try
wow fantastic
That's awesome dear. 😍
Aromal Karuvath ok
What would be the effect of putting a small capacitor across both solenoids? Seems like it would give an added boost in power. What do you think?
What is fiber reaper?
First made an engine. Now a Car, what's up?
New Physicist we have made our car but it is not working on the connections shown please give an explicit response on the connections and the possible error that might have occured reply ASAP
Hadiqa Khan , hey .
do winding , welding between wires.
Iviit Jinx ohk thank
Hadiqa Khan I
New Physicist where can I find all this stuff? and what is the price range?
any alternatives to fiber reeper and acp???please
anyone else notice that spider?
Crimson Harp. I was about to write the same question
+Crimson Harp, that's my favorite part😉😂
Thank you for comment..
This model is cool..
I am waiting for more projects done using the power of magnets😊
You mean electromagnets dont u?
‘Music’ Not conducive to watching, jarring👎🏼
Very Interesting Subject however 👍🏻
Give links of these materials
piston heads?? you forgot to put in the transmission dude😂
An electric motor doesn't need one necessarily. It pretty much acts like a steam engine.
@@Skoda130 instant torque babyyyyy
I hve made it....but its not working...is it necessary tht magnets should touch or their diameter is equal to the walls of syringe....??
Yes I am also confused
Instead of using the music you can talk and explain about your projects that will far better then music blasting in our head
Solenoid Engine, evelution off the engine!
Which copper wire should you use? Plz reply sir....🙏🙏🙏
We have made it but it is not working yo making other person fool I want to contact you soon
Good video. Please keep the caption animation simple. The current one is very annoying.
+Rahul Balakrishnan Nair , yeah thank you for valuable suggestions. Check out my latest project videos. No. Caption. But easy to understand. Comment your opinion.
Fiber reeper kya hai
magnet bergerak mengikuti arus tertutup kutub positif ke kutub negatif shaf bawah berfungsi menyetabilkan gerakan.
nice sir
magnet bergerak mengikuti arus tertutup kutub positif ke kutub negatif shaf bawah berfungsi menyetabilkan gerakan.
Bro what are the materials need can you explain in detail bro
Hye.. I am not able to understand make and break arrangement.. Pls can u help me.. I am working on this proj and looking great till..
Please don't make this this is fack it used my much time and money
i searched many carpenter workshop and hardware shop but they not know about fiber reepers .. can you help from were did i get it ..
+Mohammad Noman , if you are from india, I can send it to your address. Otherwise, I'm helpless.
yes im from india .. from were u are n how much time it take to reach at me ?
Pls send I can tell u address
I made this machine but did not even listen to it, but what could be the problem
Dude you messed up with all the measurements now I am stuck with useless parts Change the measurements of magnet, coil ,rod
Bro Zara humko bhi kuch Sikha
Can you please tell me is it carbon magnet or steel magnet and what is it's length used in making piston? Also what can we use as an alternative for ACP sheet?
Please reply ASAP!
+Khizra Ali, it's a ferrite magnet.. But I recommend you to use neodymium magnets. They are more powerful than ferrite..
Acp sheet is not a must. I used ACP sheet because they are clean.. You can use plywood, hardwood.. Etc
Thank You!
+Khizra Ali, you are always welcome..
We are unable to make proper connections of the car because the connections are not clearly visible in the video and our car is not working by that connections, you please explain the connections in more details. please.
what is the copper sleeve diameter and no of rounds are wounded on it
+Satish Pantam, 18-26 guage more than 50 turns..
MANTAPP. GASPOOLL👍👍
este tipo de diceño es creado por mi y se filtraron las patentes
Mantap itu. Tapi kuat mana ya sama dinamo kecil. Kalo buat menjalanin mobil mainan.
#orang indo jawab ya
we are making it in our school exhibition....can you give a detailed video maybe of more time but detailed
Can you give me a circuit diagram or just tell in words that which wire should be connected at which end?
Well done. Good job!
+Science & Technology Experiments , thank you dear.
Science & Technology Experiments prisercooker precious
those are not his videos
Bro i want to contact you about this project. so please can you give gmail or another information.
Is there is any compulsory to use cylindrical magnet ? Can we use hollow cylindrical magnet ?
Awesome work ..But next time find a better background music ...
rhgfh
Pls let me know
Well done bro please send me diagram & when magnet used
+Md Azeem Uddin, Use neodymium magnets instead of ferrite magnets. Pls visit the link in description for more details..
Regards
u made this very nicely but is it run fast
Hey I have made it but it is not working I think magnets are low power so or other problem pls say
what if you angle the crankshaft so it's 90 degree out of phase instead? would that work better?
If anyone made it n it worked thna please reply
any one completed this solenoid engine car
can you just sell it to me like this i would like to buy it
+juzer challawala, its very easy to make, isn't it? Let's make your own device dear. I can help you.
Regards. Have a nice day🙋
We have done almost half of the work but facing problem in connection. Please guide us the connections in details. Please reply soon
+Zubia Siddiqui, join starting leads of both solenoids and connect it to any polarity. Suppose -ve. Then connect +ve polarity to the crank shaft through a slip contact.
Now, connect 2 ending leads of solenoids to two make and break contacts near crank shaft. That's all...
New Physicist Can you please tell me how many turns you have made in the coil and how much volt battery have you used for that?
+Zubia Siddiqui, 12v , 50-60 turns
New Physicist We have carbon magnets available, can we use carbon magnets instead of neodymium or ferrite magnet?
Also what's the length of the magnets you have used?
Your reply would be of great help.
+Zubia Siddiqui, More magnetic-->more power
Neodimium magnets are the best.
Maximum half the length of solenoid.👍
Experiment.. You can do it. Change voltage, change number of turns, change magnet power..
this engine was not working
Cool
But need more précision on the emplacements and alignment of the different pieces not to lose to much power
Add a solar panel to made it run could be fun
lekin battery lagaya hai to car ko push Q karna padta hai, usme ek switch lagaya to vo switch dabate hi car aage jayega
but this is so cool idea i like this idea and i make it definately