Fiat Punto / Panda / Bravo / Nemo Key Fob battery replacement - EASY DIY
ฝัง
- เผยแพร่เมื่อ 11 ต.ค. 2024
- Link to the 2032 battery you need - amzn.to/2RhHzJF
Here is a brief demo on how to replace the 2032 weak or dead battery in your key fob. This is a very common key found on lots of Fiats / Peugeot / Citroen vehicles. Here are the steps:
1) Press the button and fling the key out.
2) Take your small screwdriver and move the flat head screw to the "unlocked" position.
3) Then take your screwdriver and slide out the tray containing the batter.
4) Slide your battery out and replace with the new battery.
5) The trick part - There is a grove that the tray must slide in to lock properly. If the screw doesn't lock easily, you need to make sure it gets into that notch.
6) Celebrate!
Thanks so much for watching and I hope it was helpful for you!
Transponder Chip: PCF7946 Chip
Electronics/Battery: Yes
Frequency : 433 MHZ
Fits these plus a few:
for Fiat 500, 500L, New Grande, Punto, Bravo,Ducato,
Link to the 2032 battery you need - amzn.to/2RhHzJF
H b
I got quoted £12.50 to replace the battery or £15 for a lifetime guarantee. I declined and put your video on and had a CR2032 in my cupboard haha
Good stuff! Glad I could help!
Thanks for this, thought I'd have a garage bill for the central locking but turns out iw was just the key fob causing it to play up. Works fine now!
No problem 👍
Your video helped to know the + and - side of cell. J just forgot it like I always do and couldnt find it marked in the key
Glad it helped!
Thanks a lot for providing such a great information. I did it I am very happy now👍👍👍👍👍👍🙏🙏
Great 👍 Glad you found the video helpful
Good job man, thanks a lot
No problem!
thanks a lot!
No worries!
Nice work!
Thank you
Thank you sir
You're welcome! Take care
Thanks buddy!!
No problem
thanks bro!
No problem!
Thanks!!
You're welcome
👍👍👍
Hi do you have a cure for the door open button not working? The other 2 buttons are perfect
I dont have the ‘lock unlock’ screw, do i just force it open?
Yes! I did and that works. The backpart underneath comes off and is easily attached again. It immediately displays the battery.
No, you probably have a different kind of cover. On the side with the FIAT logo (maybe blue, not red) is there a line just below the logo? If so follow this all around the lower part of the case gently prying it up with a mini screwdriver. It pulls straight up.
Please all note that Panda keys are not all like this. On the one I did there is no lock and the case opens in a different way.
I don't have a lock either, please how does it open???
❤💯
Glad it helped!
Having changed the battery you need to re-sync the fob to the car.
So how's that done?
Как синхронизировать ключ? Вам ответили?
Как синхронизировать ключ после замены батареи??
anyone knows how to dissasemble this thing? where the screws are? or maybe it's glued together?
screw underneath the fiat badge on the key
My battery tray fell out and I lost it, have no idea how to get a new one
I'd buy a used one on eBay and use that tray for your own fob. Here is a link - ebay.to/36Tjn7u
@@KeyFobRob cheers man, this is such a great help, ill drop you a like 👍
Great. Mine has no screw
Same issue here
@@semkoot8315 You probably have a different kind of cover. On the side with the FIAT logo (maybe blue, not red) is there a line just below the logo? (in the video there isn't) If so follow this all around the lower part of the case gently prying it up with a mini screwdriver. It pulls straight up.