9 month update, skip the chrome and get black. Unfortunately it doesnt hold up well and is starting to have lots of small flat "dots" that maybe would be a pitting? Not sure, but the rest of them works fine and the plastic still looks nice.
Just bought some and installed them today. Although I didn’t install the extra wire for the blinkers since I didn’t know how to run them and what they were for LOL. But now watching this I’m going to take it apart again 😂
I just got 3500 Dodge Ram diesel dually 4x4 extended cab 8' bed and I love it. I am looking forward to putting aftermarket rims 16" stock. Keep This Truck, you can't go wrong!!!
I have one from bean machine, it sealed very poorly for me. Had it on and off several times trying to get it right and never did. The closest I got was using Right Stuff RTV on both surfaces and it held okay.
@@AllThingsBoost I got a couple of them from eBay for 2 of my trucks and the sealing surface was grooved for an o ring type seal and it absolutely cured it.
Looks good brotha. I'm guessing since you didn't have power mirrors, that you swapped those power seats in. If so, was it plug and play like the mirrors? I've heard the contrary and that an ecm preprogrammed is necessary when adding any oem power upgrsdes
No, it actually had power seats when I got it. I. Fairly confident they were stock, because of the beat up condition of them but its possible someone swapped them in. Unfortunately I'm not sure about any ecm programming needs
so my blinker only works when my other lights are not on and my running lights dont work at all and when i have everything else running the turn signals wont work
@@AllThingsBoost i tried running the black to the ground on the turn signal wire that’s labeled ground… ill try having it grounded to the negative battery terminal and the frame i guess and see if i get something. if not ill try to switch the connector around which i dont think will work
Curious if these would work on a 1997. The Amazon links says 98+ but idk been looking for newer Gen power mirrors with led running lights for my 12 valve
9 month update, skip the chrome and get black. Unfortunately it doesnt hold up well and is starting to have lots of small flat "dots" that maybe would be a pitting? Not sure, but the rest of them works fine and the plastic still looks nice.
Keep the truck! You’re probably the best owner for it who will take care of it!
That does concern me a little lol, I may take care of things to a fault
Just bought some and installed them today. Although I didn’t install the extra wire for the blinkers since I didn’t know how to run them and what they were for LOL. But now watching this I’m going to take it apart again 😂
I just got 3500 Dodge Ram diesel dually 4x4 extended cab 8' bed and I love it. I am looking forward to putting aftermarket rims 16" stock. Keep This Truck, you can't go wrong!!!
I wouldn't get rid of it, its a good truck and will last forever!
New mirrors look great!
I always thought the wiring harness wasn’t there till I took my panel off recently…. now I want to convert them…..
Billet tappet cover cures the issues of the stamped steel leakers
I have one from bean machine, it sealed very poorly for me. Had it on and off several times trying to get it right and never did. The closest I got was using Right Stuff RTV on both surfaces and it held okay.
@@AllThingsBoost I got a couple of them from eBay for 2 of my trucks and the sealing surface was grooved for an o ring type seal and it absolutely cured it.
I wouldn't sell it. Enjoy it now that you fixed everything!
I think Trail Ridge or Boost Auto have the best made after market mirrors.... but they arent the cheapest.
Looks good brotha. I'm guessing since you didn't have power mirrors, that you swapped those power seats in. If so, was it plug and play like the mirrors? I've heard the contrary and that an ecm preprogrammed is necessary when adding any oem power upgrsdes
No, it actually had power seats when I got it. I. Fairly confident they were stock, because of the beat up condition of them but its possible someone swapped them in. Unfortunately I'm not sure about any ecm programming needs
@@AllThingsBoost ah got ya. thanks brotha
Great video... I am considering the exact same upgrade you did. Are you still happy with the mirrors you added? Are they holding up ok? Thanks
They've been holding up great so far, no issues from them as far as I can tell. The heated function has been awesome in the winter as well
so my blinker only works when my other lights are not on and my running lights dont work at all and when i have everything else running the turn signals wont work
Something is not grounded right. Or something is flipped and applying power to the ground causing a short
@@AllThingsBoost i tried running the black to the ground on the turn signal wire that’s labeled ground… ill try having it grounded to the negative battery terminal and the frame i guess and see if i get something. if not ill try to switch the connector around which i dont think will work
Do these have the blinkers as well or just running lights?
Just running lights
Curious if these would work on a 1997. The Amazon links says 98+ but idk been looking for newer Gen power mirrors with led running lights for my 12 valve
Wish I knew, they are an awesome mirror and the markers look sweet
Does your heated mirror button light up ? Like the dummy light
Yes
Do the mirrors come as a set or just one?
A set
what kind of speakers are those?
Just a walmart kicker, I have a video on them in the truck playlist
What brand mirrors
Link in the video description
Never sell it.❤️ MY CUMMINS TURBO DIESEL