Many thanks - Thanks to you I have successfully completed a i9 build in a shadow 800 case - My only criticism of this case is space for hard drives - Be Quiet should have provided with hard drive cases at the bottom section - Other than that everything is 5 stars Most grateful !!!
First of all gratz for the amazing video and the detailed information in it. In about 6 days i am going to build a similar setup in the same case and your video really covered any part of my build.
Thanks for providing this in depth video, I just unboxed my DX800 and was struggling to comprehend what the USBC and Sata cables were for, as they are not mentioned in my manual.
thank you @ChristopherFlannigan for the detailed guide, it's really helpful. I have an issue that 800 FX fans, light, and audio from the front panel don't work. I don't see fans even in BIOS. ON/OFF button works well. Do you know what should I fix or maybe have some suggestions?
Hi, Im not sure if anybody will see this who is able to help. Can somebody explain these 5 or 6 different types of USB-C headers on motherboards? my current board doesnt have any but its failing. thought i cold upgrade so i can finally plug in the usb-c port. what kind of header fo i need to look for?
Is the psu tunnel on this case plastic or steel? It looks plastic in pictures but I kinda refuse to believe that on a 160-210 eur case depending on the version. also this or the silent base 802?
Hey! Great video! I just had a quick question about the IO. I have purchased this exact case, and am now looking for a motherboard. On your video, you only plug in one plug for the 2x USB 3.2 gen 1 (A) ports and one plug for the 1x USB 3.2 gen 2 (C) port. Looking at the motherboard you used on PCPartPicker, it shows it as having 2x USB 3.2 gen 1 header , and 1x USB 3.2 gen 2X2 header. My question is which headers did you need to plug in the front IO? Were both the 3.2 gen 1 (A) ports combined into a single cable oand plugged into a single USB 3.2 gen 1 header? And was the USB C header in the USB Gen 2X2, or can it also go in a regular USB Gen 2 (C)? Sorry if I have phrased this poorly, many numbers haha.
Tell me please! If I install Be quiet Silent Wings Pro 4 140mm fans instead of the ones on the case, will they be quieter and more efficient (CFM) at the same speed? I will be very grateful for your answer!
I wanted to ask you if i can instal on the top like you the AIO artic freezer III 420, does it has space for it? Also why you connect 4 pin cable pwm on cpu fan header and not in AIO pump?
Thx for all your work, I really enjoy watching these builds and learning. I feel confident now to do one for myself. I'm going with a Phanteks G300A, because I love how small it is and it still fits an ATX motherboard. It works well too if your just using M.2 drives. I'm also going with the AMD 7600 CPU and a ASUS 7800XT for the graphics card as I'm building with 1440P performance in view.
I have one and it's pretty good in my opinion. Pretty quiet and great air flow. I have a 7800x3d and 4070 ti and I dont see Temps higher the 60 c with no water cooling just air.
Many thanks - Thanks to you I have successfully completed a i9 build in a shadow 800 case - My only criticism of this case is space for hard drives - Be Quiet should have provided with hard drive cases at the bottom section - Other than that everything is 5 stars
Most grateful !!!
Thanks for providing the best building videos on TH-cam. 💪👍
Thanks for the video, especially for clarifying on how to install HDDs.
I could not for the life of me figure out where to put the drives, life saver. Thank you
Nice video mate!
No fancy editing or useless blah, blah....
Good information and calm presentation
First of all gratz for the amazing video and the detailed information in it. In about 6 days i am going to build a similar setup in the same case and your video really covered any part of my build.
Thank you very much for this video. Just built my first pc in the Shadow Base 800 DX using your video. Thanks!
the black version doesn't seem to have the front io cables all bundled into one like yours, at least mine doesn't. confusing
Same
Thanks!! I have a build coming up in the standard case, this is very helpful.
Thanks for providing this in depth video, I just unboxed my DX800 and was struggling to comprehend what the USBC and Sata cables were for, as they are not mentioned in my manual.
Thank you christopher. I will have this case hopefully soon.
Super helpful! Thank you! :D
Great guide. This might be my new case.
THANK YOU!! It's a perfect explanation!!
Amazing build
thank you @ChristopherFlannigan for the detailed guide, it's really helpful. I have an issue that 800 FX fans, light, and audio from the front panel don't work. I don't see fans even in BIOS. ON/OFF button works well. Do you know what should I fix or maybe have some suggestions?
Hi, Im not sure if anybody will see this who is able to help. Can somebody explain these 5 or 6 different types of USB-C headers on motherboards? my current board doesnt have any but its failing. thought i cold upgrade so i can finally plug in the usb-c port. what kind of header fo i need to look for?
Is the psu tunnel on this case plastic or steel? It looks plastic in pictures but I kinda refuse to believe that on a 160-210 eur case depending on the version.
also this or the silent base 802?
them 14900ks are no joke! can we expect to see a review on the dark base 701 as well?
Maybe if be quiet! send one at release I'll review it, I'm saving reviews for the just released cases.
Hey! Great video!
I just had a quick question about the IO. I have purchased this exact case, and am now looking for a motherboard. On your video, you only plug in one plug for the 2x USB 3.2 gen 1 (A) ports and one plug for the 1x USB 3.2 gen 2 (C) port. Looking at the motherboard you used on PCPartPicker, it shows it as having 2x USB 3.2 gen 1 header , and 1x USB 3.2 gen 2X2 header. My question is which headers did you need to plug in the front IO? Were both the 3.2 gen 1 (A) ports combined into a single cable oand plugged into a single USB 3.2 gen 1 header? And was the USB C header in the USB Gen 2X2, or can it also go in a regular USB Gen 2 (C)? Sorry if I have phrased this poorly, many numbers haha.
Tell me please! If I install Be quiet Silent Wings Pro 4 140mm fans instead of the ones on the case, will they be quieter and more efficient (CFM) at the same speed? I will be very grateful for your answer!
Excellent!!
I wanted to ask you if i can instal on the top like you the AIO artic freezer III 420, does it has space for it? Also why you connect 4 pin cable pwm on cpu fan header and not in AIO pump?
Nice setup. At 24:15 near your right hand, what cable is that?
Pretty amazing how you explain everything 🫶🏻 Thank you !
Great Video!
I got this case, but wondering if it will fit Arctic Liquid Freezer III 420? Any ideas?
You could be more generous with your thermal paste. Surprised you didn't use the X method. It's proven to work extremely well.
No HDD cage at all?
22:09 Have you observed perhaps a weaker performance of Gelid GC-Extreme paste in its last batches as well as that it is more fluid?
I haven't but I'm still working through old stock (they send me loads of packets)
Thx for all your work, I really enjoy watching these builds and learning. I feel confident now to do one for myself. I'm going with a Phanteks G300A, because I love how small it is and it still fits an ATX motherboard. It works well too if your just using M.2 drives. I'm also going with the AMD 7600 CPU and a ASUS 7800XT for the graphics card as I'm building with 1440P performance in view.
Please test the Arctic Freezer III 420 :)
Hello,
Don't you need something to hold the GPU so it doesn't sag ?
Hello does this case fits 420 radiator on top?
Awesome thanks.
No problem!
@@ChristopherFlannigan May I ask a short question? Do you need to plugin the two 8 pin EPS cables or is one enough? Thx
Yea I can't get the glass panel off. Nothing works. suggestions?
Not certain but I think this is the first time I ever seen you using two memory in your builds.
Wanted to use the gen5 drive, but didn't want to reinstall windows
Why the hell you adviced to remove the back plate of the GPU holder before the build? I installed the motherboard, and now can't install it back
BASED
?
Don’t you need 420mm AIO for 14900k?
H6 Flow review or no?
Not at the moment. @NZXT don't seem interested in sending me components
@@ChristopherFlannigan thanks for the reply
more fool NZXT thenn, its a great case so was hoping to see you do it
What happens to all the PC's that you build?
Normally taken down within a day and parts reused.
hey does a e atx mainboard fit in that case ?
yes
No GPU support? That pci-e socket is going to be hurting.
great vid! What automatic screwdriver do you have, im going to buy one!
Christopher confirms he has a few loose screws 4:11 . LOL
... and push into place
how do I reset with this case? there is no a reset button, please help, tx
And where is the review of the case?
I have one and it's pretty good in my opinion. Pretty quiet and great air flow. I have a 7800x3d and 4070 ti and I dont see Temps higher the 60 c with no water cooling just air.
@@daddyzback_54gaming82is ur pc quiet?
its thermal throttling because you don't know what your doing, let me guess, your pumping 350w+ into a cpu that doesnt need any more than 280w
Nope.
What’s the verdict?